Carnes SKGA User Manual

COPYRIGHT © 2013 CARNES COMPANY

ALL RIGHTS RESERVED

SUPERSEDES 12252-E

12252-F

SPECIFICATION SHEET

Model SKGA Square Diffuser

with Round Neck Option

for 15/16” Tegular Grid Ceilings

BLOW-10

BLOW-20

BLOW-25

BLOW-30

BLOW-40

Notes:

1. The standard finish is #01 White
Electrocoat baked enamel.

2. The inlet is nominal size minus
1/8” (3) to fit inside the duct.

3. This tegular panel is sized for
15/16” (24) T-bar.

4. Panels to fit 9/16” (14) T-bar are
available.

5. Core is held in by 4-pin, spring
loaded attachment.

6. Cores are removable and
interchangeable with other blow
patterns of the same size and
shape.

DIMENSIONS LISTED IN INCHES (Centimeters)

Square Neck Size Nominal Inlet Size

A x B C

6 x 6 (152 x 152)

5 (127)
6 (152)
6 (152)

9 x 9 (229 x 229) 8 (203)

9 (229)

12 x 12 (305 x 305)

10 (254)
12 (305)

15 x 15 (381 x 381)

14 (356)
15 (381)

18 x 18 (457 x 457)

16 (406)
18 (457)

Square Blow

Patterns

Imperial [IP] Dimensions

Metric (SI) in Parentheses

CARNES COMPANY 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone: [phone] Fax: [phone] www.carnes.com

SEE

NOTES

5 & 6

SEE NOTE 2

1-1/4” (32)

2-1/2” (64)

23” (584)

23”

(584)

23-3/4” (603)

23-3/4”

(603)

3/8”
(10)

3/8”
(10)

C

C

B