Carlo Gavazzi T2000P Catalog Page

PID Controllers Temperature and Process Controls T2000P

Type Selection

Ordering Key

T2016P2 SR R X T 2 XX

Model Output 3rd output Not Used Input Communication Not Used

Specifications are subject to change without notice 1

Input Specifications (cont’d)

Thermocouple (cont’d)

S 32 to 2912°F (0 to 1600°C) T -273 to 482°F (-200 to 250°C) Standards IPTS/68/DIN 43710 CJC rejection 20:1 (0.05%°C) typical External resistance 100W maximum

(RTD)

Pt100/RTD (2 or 3 wire) -273 to 752°F (-200 to 400°C) Standards DIN 43760 (100W 0°C/138.5W

100°C Pt)

Bulb current 0.2 mA maximum

Analog process input

0 to 50mV, +/- 0. 1% 0-20mA, 4-20mA, +/- 0.1% 0-5V, +/- 0.1%, 0-10V, +/-0.1%

Specifications for Both Thermocouples and RTDs

Calibration accuracy +/- 0.25% maximum +/- 1°C Sampling frequency Input 10Hz, CJC 2 sec. Common mode rejection Negligible effect up to 140db,

240V, 50-60Hz Series mode rejection 60db, 50-60Hz Temperature coefficient 150ppm/(C maximum) Reference conditions 22C +/- 2°C, rated voltage after

15 minutes settling time

General Specifications

Power supply 100-240VAC +/- 10%, 50-60Hz Display

Upper display reading 4 digit high brightness green

LED 10mm high

Lower display 4 digit high brightness red

LED 9mm high

Output indicators LED output indicators –

flashing SP1 square green LED output indicators – SP2 round red

Keypad 3 full travel elastomeric

pushbuttons

Approvals UL, CUL, CE

Input Specifications

Thermocouple

B 32 to 3275°F (0 to 1800°C) E 32 to 1112°F (0 to 600°C) J 32 to 1472°F (0 to 800°C) K -58 to 2192°F (-50 to 1200°C) L 32 to 1472°F (0 to 800°C) N -58 to 2192°F (-50 to 1200°C) R 32 to 2912°F (0 to 1600°C)

Product Description

Programmable profiling temperature and process controller. Easy to view dual 4 digit display readout. Constructed in a rugged NEMA4X waterproof housing (front panel only) in the popular 1/16 DIN size. Various inputs from temperature sensors to analog process inputs and various combinations of outputs including analog outputs and a 3rd relay output standard.

• 1/16 DIN

• NEMA 4X

• Programable Process controller

• Autotune automatically sets PID parameters

• Multiple ramp/soak: Upto 31 programs, 126 segments

• Inputs: Thermocouple, RTD, Analog (0-20mA, 0-5VDC, 0-10VDC)

• Outputs: SSR voltage pulse, relay, Analog (0-20mA, 0-5VDC, 0-10VDC)

• 3rd relay output standard

• RS232 or RS485

• MODBUS RTU protocol

• Three year warranty

Type Selection

Model Outputs 3rd Output Not used Input Communication Not use

T2016P2 SR: 6VDC pulse & 2A relay output R: 2A relay output X: not used T: TC-B,E,J,K,L,N,R,S,T & RTD X: None XX: not used

RR: 2 - 2A relay outputs C: 4-20mA input 2: RS232 SS: 2 - 6VDC pulse outputs L: 0-5VDC input 4: RS485 CR: 4-2OmA & 2A relay output H: 0-10VDC input CS: 4-2OmA & 6VDC pulse output LR: 0-5VDC & 2A relay output LS: 0-5VDC & 6VDC pulse output HR: 0-10VDC & 2A relay output HS: 0-10VDC & 6VDC pulse output

T2000P

17 18 19 20 21 22 23 24

12345678

(–) (+) LN

Line

Neutral

4.57”

(116.2mm)

4.2”

(106.7mm)

with gasket fitted

1.76” (44.8mm)

2.0”

(51.0mm)

includes gasket

2.0” (51.0mm)

includes gasket

4-20mA

Transducer

(+) (–)

4-20mA

Mains

INPUT

Analog power

controller

Heater

User configurable

alarms

Dimensions

Output Devices (maximum of two outputs)

SSd

(solid state relay driver)

6 VDC, 20mA non-isolated

Relay Form A SPST, 2A/250VAC

resistive load

Analog Output

4-20mA 500Ω max

+/- 0. 1% full scale typical

0-5Vdc 10mA (500Ω min)

+/- 0.1% full scale typical

0-10Vdc 10mA (1KΩ min)

+/- 0.1% full scale typical

Housing Specifications

Environmental

Safety UL873, EN61010, CSA 22.2 No.

1010.1-92 Humidity Maximum 95% Altitude Up to 2000m

Housing Specifications (cont’d)

Installations Categories II and III Pollution Degree II Protection NEMA 4X (IP66) EMC emission EN50081-1, FCC Rules 15

subpart J Class A EMC immunity EN50082-2 Ambient 32 to 122°F (0 to 50°C) Moldings Flame retardant polycarbonate

Instrument body

Model T2016P2 1.76 x 1.76” (44.8 x 44.8mm) Overall length 4.57” (116mm)

Weight

T2016P2 6.4 ounces

Dimensions (front fascia)

Model T2016P2 2.0 x 2.0” (51 x 51mm)

includes gasket Sleeve length 4.2” (106.7mm)

includes gasket

Wiring Diagram

T2016P Series

Programmer Functionality

• Up to 31 programs (profiles)

• Up to 126 segments

• Unlimited use of event outputs via the 2nd and 3rd outputs

• Copy/Paste/Edit/Delete functions to simplify program building

• Call another program as a sub-program segment

• Up to 999 program loop cycles, or continuous loop cycling

• Hold back function, to ensure the next segment is not started until the last segment reaches the set-point

• 3 power fall recovery options, (Hold, Continue or Reset)

• Front panel interrogation of the program position

• Memory usage Indication during programming.

(note: program capacity is a memory function and different

types of segment use more/less memory).

Profile of a single program

Memory Allocation Table

Function Memory Usage

Ramp 4 Bytes Ramp with Holdback 5 Bytes Soak 2 Bytes Step 3 Bytes Loops (1 -3) 1 Byte Loop (4+) 2 Bytes Call 1 Byte Event Output 1 Byte Program Header 1 Byte

Set-point

Segment 1 Segment 2 Segment 4 Segment 5 Segment 6

RAMP SOAK SOAK RAMP SOAK

Segment 3

STEP

Segment 7

EVENT

OUTPUT

Time

Set-point

Segment 1 Segment 2 Segment 3 Segment 5 Segment 7 Segment 8 Segment 10

RAMP SOAK RAMP RAMP SOAK RAMP SOAK

CONTIN-

UOUS

Time

Segment 4

Program LooP

from 1 to 999 cycles

e.g. loop for 25 cycles

Segment 6

Program CALL

to call another program

e.g. Call Prog 5 then go to 7

Segment 9

E.oP Event Output

e.g. Trigger alarm on SP2

Examples

Max. capacity; 351 Bytes, 126 segments per program, 31 programs

Example 1

(349 Bytes) One program of 116 segments (58 ramps, 58 soaks)

Example 2

(340 Bytes) 4 programs of 28 segments (14 ramps, 14 soaks)