Cardinal AS 400D Series, AS- 410D, AS-420D Setup And Operation Manual

Intelligent Scale Base
Setup and Operation Manual
CARDINAL SCALE MFG. CO. 8541-M106-O1 Rev B 12/02
PO BOX 151 WEBB CITY, MO 64870
Web Site - http://www.detectoscale.com
Printed in USA
1
INTRODUCTION
TABLE OF CONTENTS
Thank you for your purchase of our Detecto AS-400D Series Intelligent Scale Base. It was built with Detecto quality and reliability at our factory in Webb City, Missouri. The AS-400D series scales consist of the AS-400D, AS­410D and AS-420D. All scales are equipped with a bi-directional RS232C compatible port for communication with a computer.
FCC COMPLIANCE STATEMENT Notice: This equipment generates, uses and
can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area may cause interference in which case the user will be responsible to take whatever measures necessary to correct the interference.
TRADEMARKS
All rights reserved. Reproduction or use, without expressed written permission, of editorial or pictorial content, in any manner, is prohibited. No patent liability is assumed with respect to the use of the information contained herein. While every precaution has been taken in the preparation of this manual, the Seller assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from use of the information contained herein. All instructions and diagrams have been checked for accuracy and ease of application; however, success and safety in working with tools depend to a great extent upon the individual accuracy, skill and caution. For this reason the Seller is not able to guarantee the result of any procedure contained herein. Nor can they assume responsibility for any damage to property or injury to persons occasioned from the procedures. Persons engaging the procedures do so entirely at their own risk.
Serial Number ______________________
Date of Purchase____________________
Purchased From ____________________
__________________________________
__________________________________
RETAIN THIS INFORMATION FOR FUTURE USE
INTRODUCTION - - - - - - - - - - - - - - - - - -
SPECIFICATIONS - - - - - - - - - - - - - - - - -
INSTALLATION - - - - - - - - - - - - - - - - - - -
BAUD RATE AND WEIGHT MODE SELECTION - - - - - - - - -
SERIAL INTERFACE PROTOCOL - - - - - ­SCALE WEIGHT DATA STRINGS - - - - - ­CALIBRATION - - - - - - - - - - - - - - - - - - - -
CARE AND MAINTENANCE - - - - - - - - - -
SPECIFICATIONS
Scale Capacity:
400D = 100 lb
410D = 150 lb
420D = 200 lb
Platform Size:
400D 410D
420D
Display: 6 digit, 7 segment,
Annunciators lb, lb-oz, ZERO
External Controls ZERO Button
Power 110 to 120 VAC
The AS 400D Series scale is shipped from the factory in the following configuration:
9600 Baud 8 Data Bits No Parity 1 Stop Bit Pounds/Ounces Mode
(NOTE! AS-420D is Pounds only)
PRECAUTIONS
Before using this instrument, read this manual and pay special attention to all "WARNING" symbols:
IMPORTANT ELECTRICAL
WARNING
0 to 100 lb x 0.5 oz
0 to 100 lb x 0.5 oz & 100 to 150 lb x 1 oz
0-200 lb x 0.1 lb
18 in x 18 in (46 cm x 46 cm)
24” x 24” (61 cm x 61 cm)
red LED, 1/2" high
(50/60 Hz)
1
1
2
3 4 4 5
5
1
Loading...
+ 5 hidden pages