Page 1
MODELS
243, 2431, 2441
and 2431UN
BABY SCALE
Owners Manual
Page 2
Page 3
UNPACKING AND SET-UP INSTRUCTIONS
1. Remove scale and packing from carton.
2. Remove packing from ends of scale.
3. Remove packing from around beam.
4. Set scale on firm level surface.
5. Referring to Figure No. 1, install the baby tray.
FIGURE NO. 1
6. With poise set at capacity, press firmly down on center of baby tray 3 or 4 times, raising
the beam. This should realign parts moved during shipment.
7. To zero scale, rotate the balance ball until beam centers in the trig loop. (Balance ball
is the black cylinder shape on the left side of beam). Refer to Figure 2.
FIGURE NO. 2
1
Page 4
OPERATING INSTRUCTIONS
1. Referring to Figure 3, place blanket or covering on tray.
2. Before weighing, make certain scale is at zero (refer to Figure 2 and step 7 of
Unpacking and Set-Up Instructions).
3. Place infant on scale.
4. Slide the large poise until the beam tip starts to bottom in the trig loop.
5. Read and record weight.
6. Remove infant and blanket covering from tray.
FIGURE NO. 3
2
Page 5
PARTS IDENTIFICATION
25
23
26
18
19
16A
16
13
11
17
30
30
31
22
15
15
13
35
24
7
10
34
9
14
5
6
2
20
21
27
33
12
8
32
28
29
14
1
4
3
Page 6
PARTS IDENTIFICATION, Cont.
ITEM QTY. PART NUMBER DESCRIPTION
1 1 0020-B020-0A
0020-B037-0A
2 1 6013-0077 NUT HEX 3/8-16 SS
4 1 6021-1247
6021-0074
5 1 6024-0046 WASHER LOCK 3/8
6 3 6980-0069 WASHER FLAT #8 NYLON .171 X .375 X .06
7 1 0020-C002-1A BASE ASSY
8 1 0020-B021-08 TOGGLE BAR
9 1 0020-C004-0A FULC YOKE ASSY
10 1 0020-C007-0A BEAM HEAD ASSY
11 1 0020-C014-0A END YOKE ASSY
12 2 20B1068 PIN
13 4 20B87 BEARING
14 8 6013-0431 NUT HEX #8-32 KEP NUT
15 9 6021-0822 SCW RD HD #8-32 X .375 PHIL DR ZP
16 2 10020-B012-08
0020-B041-18
16A 1 0020-B041-08 POISE BACK UPPER (2441)
17 1 0066-D112-08 POISE HALF
18 4 6018-0790 SCW RD HD #8-32 X 1.0
19 4 6024-0032 WASHER LOCK #8
20 1 0020-B013-08 BEAM ADAPTER
21 1 0020-B025-08 POISE STOP
22 1 0020-C008-08 BEAM
23 1 0020-C027-08
0020-C028-08
0020-C009-08
0020-C038-08
24 2 6013-0297 NUT HEX #10-32 SS
25 1 6021-0100 SCW RD HD DRIV #2 X .125 SS
26 1 0020-C018-0A TRAY ASSY
27 2 6007-0013 SCW HEX HD .25-20 X .75 SS
28 2 6013-0047 NUT HEX #.25-20 SS
29 2 6013-0426 NUT WING .25-20 NYLON LOCKING
30 6 6021-1013 SCW ROUND HD #10-32 X .375 SS
31 4 6024-0037 WASHER LOCK #10 SS
32 2 6024-0040 WASHER LOCK 1/4” SS
33 2 6024-1064 WASHER FLAT 1/4” SS
34 4 0020-B032-08 FRICTION CLIP
35 2 6024-0049 WASHER LOCK EXT STAR #10
BALANCE BALL ASSY (243, 2431, 2431UN)
BALANCE BALL ASSY (2441)
SCW HEX HD 3/8-16 X 4.0 (243, 2431, 2431UN)
SCW HEX HD 3/8-16 X 5.0 (2441)
POISE BACK (243, 2431, 2431UN)
POISE BACK LOWER (2441)
INSERT 20 lb X 2 oz (243)
INSERT 10 kg X 50g (2431)
INSERT 10kg X 100g (2431UN)
INSERT 16kg X 100g (2441)
4
Page 7
5
Page 8
6
Loading...