CaptiveAire BLL User Manual

BLL Series

Low Proximity Passover Exhaust Hood

The BLL Series is a Type I Hood and is designed for extremely low minimum exhaust CFM requirements. Top of
hood can be used as plate shelf and low hanging height allows passover designs. Ideal for concession stands.

Offering A Fully Integrated Package, Pre-Engineered For Optimum Performance

ADVANTAGES

ETL Listed for use over 400°F cooking surfaces. ETL Listed to Canadian safety standards, ETL Sanitation
Listed and built in accordance with NFPA 96.
Low exhaust CFM required.
Sturdy stainless steel construction.
Space saving, compact design uses limited kitchen space.
Can screw mount to wall with built in top flange.

Requirements

This model is not designed to ventilate heavy charbroilers.
Ceiling and equipment height must be provided to determine hanging height and enclosure panel sizing.
Hood may underhang equipment by maximum 4.5". Side Clearance is 2”.

PERFORMANCE

400°F Cooking Surface--Ovens, Steamers, Kettles Open-Burner Ranges, Griddles, Fryers

Model Type Min. Exhaust CFM/ft. Max. Supply CFM/Ft.

BLL Wall Hood 110 N/A

FEATURES

Low proximity, passover type hood.
Fabricated of Type 430 stainless steel, #3 or #4 polish, on all exposed surfaces. Optional type 304
stainless steel available.
Fitted with aluminum baffle filters, removable for cleaning. Optional stainless steel baffle and high
efficiency stainless steel baffle filters are available.
Sloped grease drain system with removable 1/2 pint cup for easy cleaning.
Model BLL is ETL Listed for 400°F cooking surface (File 3054804-001 without exhaust damper), ETL Listed
to Canadian safety standards, ETL Sanitation Listed and built in accordance with NFPA Standard 96.

[phone]

OPTIONS

ENCLOSURE PANELS: Constructed of stainless steel...mounting channel factory-welded to hood for field

installation of panels.

SEPARATE FANS: ETL Listed single exhaust fans and supply-air fans and curbs available...same features,
construction methods and performance ratings as roof top package above.

HEATED MAKE-UP AIR: ETL Listed direct fired gas heated make-up air unit manufactured by CaptiveAire...ETL
Listed for natural gas and propane...design integrates the blower and burner into a single package...heavy duty,
weather resistant, galvanized steel construction...units available in Roof Top Package or as a stand alone heated
make-up air module...several models available to meet almost any performance rating specification.

FULLY INTEGRATED PACKAGE

CaptiveAire sells this hood as a stand-alone appliance to be integrated into a kitchen ventilation application.
CaptiveAire also provides this hood as part of a FULLY INTEGRATED PACKAGE designed by CaptiveAire and
pre-engineered for OPTIMUM PERFORMANCE. The package consists of the hood, factory pre-wired ETL Listed
electrical controls, and a factory pre-piped UL Listed fire suppression system. Other options include an ETL Listed
exhaust fan, an ETL Listed non-tempered make-up air fan, and/or an ETL Listed direct-fired heated make-up air
unit. Fire suppression systems include final hookup and inspection.

CERTIFICATIONS

The BLL Model has been certified by ITS. This certification mark indicates that the product has
been tested to and has met the minimum requirements of a widely recognized (consensus) U.S.
and Canadian products safety standard, that the manufacturing site has been audited, and that
the applicant has agreed to a program of periodic factory follow-up inspections to verify continued
performance.

Models BLL are ETL Listed under file number 3054804-001 and complies with UL710, ULC710 and
ULC-S646 Standards.

[phone]