BI-CARM
UTILITY SET - RESTAURANT DUTY
Air Volume:
Maximum SP:
FEATURES & BENEFITS
Full AMCA CLASS 1 operation.
Vented motor cover for weather protection.
UL762 Listed for restaurant duty.
Upblast discharge directs air away from floor.
Continuously welded housing.
Easily accessible clean out door.
2" grease drain will not clog.
Fan is moisture resistant for high humidity applications.
OPTIONS
Heat Slinger.
Shaft Seal.
Emergency Disconnect Switch.
Vibration Isolators.
CERTIFICATIONS
CaptiveAire certifies that Models BI10CARM thru BI36CARM shown herein are licensed
to bear the AMCA seal. The ratings shown are based on tests and procedures performed
in accordance with AMCA Publication 211 and comply with the requirements of the AMCA
Certified Rating Program.
2 - 25999 cfm
6" wg. @ standard air density
Models BI10CARM thru BI36CARM have been certified by ITS. This certification mark
indicates that the product has been tested to and has met the minimum requirements of a
widely recognized (consensus) U.S. products safety standard, that the manufacturing site
has been audited, and that the applicant has agreed to a program of periodic factory
follow-up inspections to verify continued performance.
Models BI10CARM thru BI36CARM are ETL Listed under report number 3100959CRT
and comply with UL705 (electrical) and UL762 Standards and CSA Std C22.2, No 113.
800) 965-0420
Catalog #109
July 2004