CaptiveAire BI10CA User Manual

A

(

BI-CA

UTILITY SET - GENERAL DUTY

Air Volume:
Maximum SP:

FEATURES & BENEFITS

Full AMCA CLASS 1 operation.

Vented motor cover for weather protection.

Standard top horizontal discharge.

Discharge position can be easily rotated in 45° increments in the field.

vailable in CCW or CW rotation.

Corrosion resistant enamel finish.

OPTIONS

Back Draft Damper.

Inlet & Outlet Guards.

Heat Slinger.

Shaft Seal.

Emergency Disconnect Switch.

Vibration Isolators.

CERTIFICATIONS

CaptiveAire certifies that Models BI10CA thru BI36CA shown herein are licensed to bear
the AMCA seal. The ratings shown are based on tests and procedures performed in
accordance with AMCA Publication 211 and comply with the requirements of the AMCA
Certified Rating Program.

2 - 25999 cfm
6" wg. @ standard air density

Models BI10CA thru BI36CA have been certified by ITS. This certification mark indicates
that the product has been tested to and has met the minimum requirements of a widely
recognized (consensus) U.S. products safety standard, that the manufacturing site has
been audited, and that the applicant has agreed to a program of periodic factory follow-up
inspections to verify continued performance.

Models BI10CA thru BI36CA are ETL Listed under report number 3100959CRT and
comply with UL705 and CSA C22.2, No. 113 Standards.

800) 965-0420

Catalog #109

July 2004