Chapter 7 FCC ID Warning:………………………………………………………………… 43
2
CR2 AC750 Wireless Dual-Band Router
Chapter 1 Introduction
Congratulations on your purchase of this outstanding AC750 Wireless Dual-Band Router.
The Wireless Router using 2.4G and 5G dual-band concurrent technology, support latest
802.11ac standards, backward compatibility IEEE802.11a/b/g/n, 2.4GHz and 5GHz
wireless transmission rate up to 750Mbps when concurrent operation, Integrated router,
Wi-Fi access point, 4 ports 100M switch and firewall functions in one. Provide convenient
and comprehensive network management functions, supports URL filtering, MAC
address filtering and the QoS bandwidth control function, can effectively allocate the
client's download rate. Supports wireless data encryption, and can guarantee the security
of data transmission in wireless network.
1.1 Features
z Provides a 10/100M WAN interface, can be connected to xDSL modem, Cable
modem and Ethernet.
z Provides four 10/100M LAN interfaces, can be connected to various Ethernet
devices.
z 2.4G and 5G concurrent working wireless transmission rate up to 750Mbps.
z Supports the WPS one key encryption,
connection.
zSupports 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK, etc. encryption and
security mechanism.
z Built-in Network Address Translation (NAT) supports virtual server, special
application and DMZ host.
z Built-in DHCP server, and also supports static address allocation.
z Supports the VPN pass - through, can build a VPN client.
z Built-in firewall functions, supports domain and MAC address filtering.
z Supports QoS bandwidth control function, can effectively allocate the client's
download rate.
zSupports for dynamic DNS function, can provide domain name service for dynamic
IP address.
z Supports access control based on MAC address, can effectively to control the
Intranet user Internet access permissions.
zSupports remote Web management and software upgrades.
easy to implementing network encrypted
1.2 System Requirement
z An Ethernet-Based Cable or xDSL modem
z An Ethernet Card on PC
z TCP/IP network protocol for each PC
z RJ45 Twisted-pair
3
CR2 AC750 Wireless Dual-Band Router
z Microsoft IE (or Firefox or Netscape)
1.3 Package Contents
Please unpack the box and check the following items:
z One AC750 Wireless Dual-Band Router
z One Power Adapter
z One User Manual
4
CR2 AC750 Wireless Dual-Band Router
Chapter 2 Hardware Installation
2.1 Led indicators
The top panel contains LED indicators that show the status of the unit.
Name Status Indication
Off Power is off.
Power
On Power is on.
SYS/WPS
WAN
LAN(1-4)
5GHz
2.4GHz
Flashing the LED flashes about two minutes during WPS working.
Off There is no device linked to the corresponding port.
On
Flashing There is an active device linked to the corresponding port.
Off The wireless function is disabled.
Flashing
Off The wireless function is disabled.
Flashing
2.2 Back Rear Panel
There is a device linked to the corresponding port but
there is no activity.
The wireless function is enabled. The router is working on
5GHz radio band.
The wireless function is enabled. The router is working on
2.4GHz radio band.
The following parts are located on the rear panel.
5
CR2 AC750 Wireless Dual-Band Router
LAN (1,2,3,4): These four LAN ports are where you will connect networked devices, such
as PCs, print servers, remote hard drives, and anything else you want to put on your
network. If you connect this product with the Hub (or Switchboard) correctly, the router ’s
corresponding LED and the Hub’s (or the Switchboard’s) must be illuminates.
WAN: 10/100Mbps RJ45 port. The WAN port is where you will connect Cable/xDSL
Modem or other LAN.
RESET: The Reset Button has two functions, WPS and Factory Default. With the router
powered on, When selecting the WPS function,use a pin to press and hold the button
about 2 seconds, the WPS LED will flash two minutes. The other one, use a pin to press
and hold the button about 5 seconds, the router will restore to factory default.
POWER: The Power socket is where you will connect the power adapter. Please use the
power adapter provided with this router.
Wireless antenna: To receive and transmit the wireless data.
2.3 Typical install
Before installing the router, make sure your PC is connected to the Internet through the
broadband service successfully. If there is any problem, please contact your ISP. After
that, please install the router according to the following steps. Don’t forget to pull out the
power plug and keep your hands dry.
1. Make sure all devices, including your PCs, modem, and router, are pow ered down.
2. Using an Ethernet network cable, connect the LAN or Ethernet network port of the
cable or DSL modem to the router’s WAN port.
3. Power on the cable or DSL modem, and power on the PC you wish to use to configure
the router.
6
CR2 AC750 Wireless Dual-Band Router
4. Connect the included power adapter to the router. And connect the other end of the
adapter to an electrical outlet.
7
CR2 AC750 Wireless Dual-Band Router
Chapter 3 Quick Installation Guide
The chapter mainly presents how to enter the router’s Web page and simple router
settings. After you have finished the hardware installation (Please refer to chapter 2), the
following steps will assist you to set the network configurations for you computer.
3.1 Set the Network Configurations
1. On your computer desktop right click "My Network Places" and select "Properties".
2. Right click "local Area Network Connection" and select "Properties".
3. Select "Internet Protocol (TCP/IP)" and click "Properties".
8
CR2 AC750 Wireless Dual-Band Router
4. Select "Obtain an IP address automatically" or select "Use the following IP
address(S)".
A. Select "Obtain an IP address automatically" and "Obt ain DNS server address
automatically". Click "OK".
B. "Use the following IP address (S)"
IP Address: 192.168.1.XXX: ( XXX is a number from 2~254)
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
DNS Server: You need to input the DNS server address provided by you ISP.
Otherwise, you can use the router's default gateway as the DNS proxy server.
Tip: If you are not sure of the DNS server address, we recommend you to select
"Obtain an IP address automatically (O)" and "Obtain a DNS server address
9
CR2 AC750 Wireless Dual-Band Router
automatically".
Click "OK" to save the configurations.
3.2 Getting Started
If successful, you can see the status page.
To access the configuration pages,
open a web-browser such as Internet
Explorer and enter the IP address of
the router (192.168.1.1).
The Default User/Password: admin
10
CR2 AC750 Wireless Dual-Band Router
3.3 Setup Wizard
Click on "Wizard" pages, it will guide you to setup your router step by step in simple way.
In this section, there are seven steps to do it.
Please follow the steps and complete the router configuration.
Step 1 Setup Operation Mode
The router supports three operation modes, Gateway, Bridge and Wireless ISP. And
each mode is suitable for different use, please choose correct mode.
11
CR2 AC750 Wireless Dual-Band Router
Step 2 Time Zone Setting
The Time Configuration option allows you to configure, update, and maintain the correct
time on the internal system clock. Daylight Saving can also be configured to automatically
adjust the time when needed.
Enable NTP client update: Check this box to connect NTP Server and synchronize
internet time.
Automatically Adjust Daylight Saving: Check this box, system will adjust the daylight
saving automatically.
Time Zone Select:
Select the Time Zone from the drop-down menu.
NTP Server: Select the NTP Server from the drop-down menu.
Step 3 LAN Interface Setup
Setup the IP Address and Subnet Mask for the LAN interface.
12
Loading...
+ 31 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.