Canyon CNP-WF518N3 Quick Manual

EN - 1

Wireless USB Adapter

Article: CNP-WF518N3 Quick Guide v1.0

Package Contents

1. CANYON CNP-WF518N3 Main Unit

2. Driver CD

3. Quick Guide

4. W a rranty Card

Hardware Overview

Connecting to Device

1. Power on PC.

2. Insert the device into an USB

2.0 slot.

3. Insert Driver CD into
CD-ROM to start driver
installation.

NOTE:
It is recommended to install driver
from Driver CD for full functionali­ties.

Installing Device Driver

NOTE:

Please click on Ok when prompted to install Unsigned Driver. This is a
Windows system warning that indicates the specific driver program is not
certified by Windows.

1. After inserting Driver CD, cl ick on Setup. exe to launch driver
installation process.

WPS Button

USB Connector

Status LED

Indicator

EN - 2

2. Click on the language desired. Click on Next to continue or Cancel to
exit setup .

3. Click on Next again to continue or Cancel to exit setup.

4. Click on Install to start driver installation process or Back to return to
previous page. Click on Cancel to exit setup.

5. The installation process may take up to a few minutes to finish. Click
on Finish to complete installation process.

Connecting to Wireless Network

Before setting up the device, please make sure that wireless network is
setup and access point/wireless router is functioning properly . Please follow
below steps to join a specific wireless or encrypted network.

Using Configuration Utility

1. Double-click on the desktop
shortcut, click on the icon as
indicated, or right click and
click on Open Configuration
Utility to pop up
configuration window.

2. Click on Available Network
tab and double-click on the
wireless access point desired
for connection.

3. Click on Refresh to obtain
most updated list.