Canyon CNP-WF514 Quick Start Manual

ENG - 1

Wireless Broadband Router

Article: CNP-WF514 Quick Guide v1.0

Package Contents

1. CANYON CNP-WF514 Main Unit

2. Power Adapter

3. Documentation CD

4. Standing Base

5. Quick Guide

6. W a rranty Card

Hardware Overview

Getting Started

Connecting to Device

1. Begin by searching for an appropriate location to setup device.

Please keep in mi nd to keep device in the center of worki ng area as
the signal strength and data transfer rate diminishes with distance.

2. It is also recommended to place device at a higher position to
ensure minimum obstacle interference.

3. Make sure that all network devices are powered off, including the
device itself, PCs, switches, cable or DSL modem, and others.

4. Connect the modem to WAN port of the device by one CAT 5
Ethernet cable.

ENG - 2

5. Connect PC(s) with LAN ports (PC1/PC2/PC3/PC4) of the device by

CAT 5 Ethernet cables. 1 PC connects to 1 port using 1 cable only.

6. Power on the cable or DSL modem.

7. Plug in power adapter. The P ower status indicator at front panel of

device will light up as soon as power adapter is connected properly .

8. Power on PC(s).

Internet Configuration Wizard

The default n etwork address of the device is set as 192.168 .1.1. Please
configure IP ad dress of host PC at 192.168.1.X XX where XXX is a number
between 002 and 254. Th e subnet mask should be 255.255.255.0. Please
follow below steps to enter web browser management mode.

1. Open a browser (Internet Explorer browser only) and type in
“192.168.1.1” at the address bar and press Enter.

2. Type in “guest” at the user name text box and “guest” again at the
password text box.

3. The web browser management home page will be displayed.

4. Click on 8 different functions on the main router menu on the left.
The corresponding information will be displayed at right.

5. Click on Help at any time to bring up help menu.

1. Start Internet Configuration Wizard

z Internet Configuration Wizard

will pop up upon successful

login.
NOTE:
Temporarily disable popup
window blocking option if
necessary or click on Wizard to
start.
z Select pop up to enable

automatic Internet

Configuration Wizard prompt

window. Click on Save to save

this setting.

z Click on Start to continue.
z Click on Exit to exit.