Canyon CN-D05P, CN-D08P User Manual
3
1 2
Introduction
Features Overview
Package Contents
This user's guide is for 5/8-Port 10/100M Ethernet Mini
Switch. The 5/8-Port 10/100M Ethernet Mini Switch
is designed for easy installation and high performance
in an environment where traffic on the network and the
number of users increase continuously.
Small businesses and corporate branch offices can
now take full advantage of 100Mbps Fast Ethernet
performance and preserve existing desktop investment
with no changes required to PCs, NICs, cabling, drivers,
or PC configurations.
•
•
Auto MDI/MDIX function each port
•
Auto-negotiation on each port.
•
Auto-polarity detection for correction of incorrect
polarity on the received twisted pair on each port
•
Store-and-forward switching scheme capability to
support rate adaptation and ensures data integrity
•
Data forwarding rate 148,800pps per port at 100%
of wire-speed
•
The shortest forwarding latency time
Performance Highlights
•
One 5/8-Port 10/100M Ethernet Mini Switch
•
One External Power Adapter
•
Two Screws
•
Two Anchors
•
One User’s Guide
The following describes the front panel, rear panel and
LED indicators of the 5/8-Port 10/100M Ethernet Mini
Switch .
Hardware
Front Panel
LED Indicators
LED Status Description
Power On Power on
Link/Act
On Link status of connected port
Blink Data Transmission status of connected port
Rear Panel
DC IN
5 4 3 2 1
DC IN
6
4
3 2
157
8
5-Port 10/100M Ethernet Mini Switch
•
•
Support MDIX auto detect
•Auto-negotiation capability
IEEE802.3x flow control for Full-Duplex operation
•Five/Eight 100/10Mbps RJ-45 ports
•Conforms to IEEE 802.3 10BASE-T and IEEE802.3u
100BASE-TX standards
•Back pressure for Half-Duplex flow control
•Full and Half-Duplex mode operation
•Support store-and-forward mode switching
•Source address learning and aging function
LEDs to indicate : Link/Act and Power
8-Port 10/100M Ethernet Mini Switch
5-Port 10/100M Ethernet Mini Switch
8-Port 10/100M Ethernet Mini Switch
1. Auto MDIX Function
The switch port can connct to other switches, NICs,
or hubs.
Connect way
A PC or hub can be connected to the 5/8-Port N-Way
Mini Switch via a twisted-pair cable. The connection
can link to any port from 5/8-Port N-Way Mini Switch.
Network Connection
4
5
2. Type of Power In
DC IN
54321
DC IN
6
4321578
RJ-45 JACK
Model Power Function
AX/SX Adaptor 7.5V
Trouble shooting
Power Question
1.Please check your Power source is ok or not.
2.Have your Adaptor plugged into the Switch’s DC Jack?
Link Fail
You can check this List Point
1.Is the cable broken?
2.Does the cable plug in?
3.Is the power on?
Packet Lost
You can check this List Point
1.If you use 100M Link, the twisted-pair must support
100Mbps, and the cable is Cat. 5 or Up.
2.If you use 10M Link, the twisted-pair must support
10Mbps, and the cable is Cat. 3 or Up.
3.If your cable is too old, please change it.
3. Power Consumption
Voltage 7.5V
Current Max 500mA
Power
Dissipation
3.5W(Max)
Loading...