Canon REBELT2I, 60D, 5D MK III User Manual

Communication Software for the Camera
1D X
1D Mk IV
1Ds Mk III
1D Mk III
5D Mk III
5D Mk II
7D
60D
50D
40D
REBELT4i
650D
REBELT3i
600D
REBELT2i
550D
REBELT1i
500D
REBELXSi
450D
REBELT3
1100D
REBELXS
1000D
1D X
COPY

EOS Utility

Ver. 2.11
Introduction
Contents at
a Glance
Downloading
1
Camera
Settings
2
Instruction Manual
Content of this Instruction Manual
EU is used for EOS Utility.Camera model is displayed as an icon.
Example: EOS-1D X
displays the relevant camera model.
The selection sequence of menus is displayed in
procedures. (Example: Select the [Window] menu  [Main Window].)
Square brackets are used to indicate items such as
menu names, button names and window names that appear on the computer screen.
Text inside < > indicates a camera switch name or
icon, or a keyboard key name.
** indicates a reference page.
Click to move to the relevant page.
: Marks information that should be read before use.
: Marks additional information you may find helpful.
Switching Between Pages
Click on arrows on the bottom right of the screen.
: next page
: previous page
: return to a page you had previously displayed
Click on the chapter headings on the right side of
the screen to switch to the contents page of that chapter. Also, click the item you want to read about on the table of contents to move to the relevant page.
Remote
Shooting
3
Preferences
4
Reference
Index
© CANON INC. 2012 CCS-M034EUME-000

READ CAREFULLY BEFORE USING!

COPY
CANON SOFTWARE LICENSE AGREEMENT
IMPORTANT - READ THIS AGREEMENT BEFORE USING THE SOFTWARE ON THE CD-ROM IN THIS BOX. BY USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
This is a license agreement (the [Agreement]) between you and Canon Inc. ([Canon]).
IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT USE THE SOFTWARE PROGRAM ON THE CD-ROM AND THE USER MANUAL IN THIS BOX (COLLECTIVELY, THE [SOFTWARE]) AND RETURN THE SOFTWARE WITHIN 30 DAYS FROM THE DATE OF PURCHASE TO YOUR POINT OF PURCHASE FOR A REFUND.
In consideration of the right to use the SOFTWARE, you agree to abide by the terms and conditions of this Agreement.
1. LICENSE: Canon grants you the non-exclusive right to use the SOFTWARE only on a single computer. You may physically transfer the SOFTWARE from one computer to another provided that the SOFTWARE is used on only one computer at a time. You shall not install or use the SOFTWARE on a network, multiple CPU, multiple site arrangement, or any other hardware configuration where the SOFTWARE is accessible to more than one CPU or to more than one user.
YOU SHALL NOT ASSIGN, SUBLICENSE, RENT, LEASE, LOAN, CONVEY OR OTHERWISE USE, TRANSFER, COPY, TRANSLATE, CONVERT TO ANOTHER PROGRAMMING LANGUAGE, ALTER, MODIFY, DECOMPILE OR DISASSEMBLE THE SOFTWARE, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT.
2. BACK-UP COPY: You may make one copy of the SOFTWARE solely for back-up purposes, or copy the SOFTWARE onto the permanent storage device (e.g. a hard disk) of your computer and retain the original for back-up purposes. Any other copying of the SOFTWARE is a violation of this Agreement. You must reproduce and include the copyright notice on the back-up copy.
3. SUPPORT AND UPDATES: Canon is not responsible for providing maintenance or support for use of the SOFTWARE. No updates, fixes or support will be made available for the SOFTWARE.
4. LIMITED WARRANTY AND LIMITATION OF LIABILITY: It is your responsibility to choose, maintain and match the hardware and software components of your computer system. Thus Canon does not guarantee uninterrupted service or correction of errors or that the functions or performance of the SOFTWARE will meet your requirements. THE SOFTWARE IS LICENSED ON AN [AS IS] BASIS AND WITHOUT WARRANTY OF ANY KIND. The CD-ROM storing the SOFTWARE is warranted only against defective material under normal use for a period of ninety (90) days after purchase from an authorized Canon dealer as evidenced by your sales receipt. Your sole remedy for a defective CD-ROM shall be replacement of the same without charge when returned by you at your expense to your point of purchase and proven to be defective upon inspection. The replacement CD-ROM will be warranted for the remainder of the original ninety (90) day warranty period of the defective CD-ROM. The limited warranty does not apply if the failure of the CD-ROM resulted from accident, abuse or misapplication of the SOFTWARE and shall not extend to anyone other than the original user of the SOFTWARE.
EXCEPT AS SPECIFICALLY SET FORTH IN THIS PARAGRAPH 4, CANON, CANON’S SUBSIDIARIES, DISTRIBUTORS AND DEALERS DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE.
NEITHER CANON NOR ANY OF CANON’S SUBSIDIARIES, DISTRIBUTORS OR DEALERS IS LIABLE FOR ANY DAMAGES HOWSOEVER CAUSED, INCLUDING WITHOUT LIMITATION, DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE INCLUDING LOSS OF
PROFITS, EXPENSE OR INCONVENIENCE HOWSOEVER CAUSED OR ARISING OUT OF THE SOFTWARE OR THE USE THEREOF.
NEITHER CANON, NOR ANY OF CANON’S SUBSIDIARIES, DISTRIBUTORS OR DEALERS SHALL HAVE ANY OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE OR THE USE THEREOF INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY.
5. TERM: This Agreement is effective upon your using the SOFTWARE and remains in effect until expiration of all copyright interests in the SOFTWARE unless earlier terminated. You may terminate this Agreement by destroying the SOFTWARE. This Agreement will also terminate without notice to you if you fail to comply with any of the terms of this Agreement and you must then promptly return the SOFTWARE. In addition, Canon may enforce its other legal rights.
6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE: The SOFTWARE is provided with restricted rights. Use, duplication or disclosure is subject to restrictions as set forth in either subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer software clause at DFARs 252.227-7013 or subparagraph (c) (1) and (2) of the Commercial Computer Software Restricted Rights Clause at FAR 52.227-19, as applicable.
7. SEVERABILITY: In the event that any provision of this Agreement is declared or found to be illegal by any court or tribunal of competent jurisdiction, such provision shall be null and void with respect to the jurisdiction of that court or tribunal and all the remaining provisions of this Agreement shall remain in full force and effect.
8. CONTROLLING LAW: The terms of this Agreement as it relates to purchases of the Software in the United States of America shall be governed and construed in all respects in accordance with the laws and regulations of the State of New York, without reference to choice of law principles. The terms of this Agreement as it relates to purchases of the Software in Canada shall be governed by the laws of the province of Ontario.
9. OWNERSHIP: All rights, including but not limited to copyrights and trade secret rights, to the SOFTWARE belong to Canon, its affiliated corporations and third party licensors. Your use of the SOFTWARE is subject to the United States, Canada and other applicable copyright and trademark laws and nothing in this Agreement constitutes a waiver of the rights of Canon, its affiliated corporations and third party licensors under such laws. Nothing contained in Paragraph 1 shall be construed to give Canon any ownership rights in any images, graphics or textual material that you save in connection with the Software.
10.ACKNOWLEDGEMENT: BY USING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PRO OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED OFFICER OF CANON.
OSALS
P
Introduction
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
Index
1

Introduction

COPY
Introduction
EOS Utility (hereinafter EU) is software for communication with your EOS DIGITAL camera. By connecting the camera and computer with the cable provided with the camera, you can download to your computer images saved in the camera’s memory card as well as set various camera settings or shoot remotely from EU on your computer.

Main Features of EU

From EU, you can control the camera remotely and perform the following main features.
Batch download to your computer images
saved in the camera’s memory card.
You can also download to your computer only images you have
selected.
Set various camera settings from your
computer.
Shoot remotely by controlling the camera
from your computer.
Remote Live View shooting – Shoot while checking your subject in
real time on your computer.
You can also shoot remotely by operating the camera’s shutter
button.
Preset a time allowing the camera to shoot automatically with
timer shooting.
When downloading images or shooting
remotely, view/check images with the

System Requirements

OS Mac OS X 10.6.8, 10.7
Computer
CPU Intel processor
RAM Minimum 1GB
Interface Hi-Speed USB
Display
Check the Canon website for the latest system requirements, including supported OS versions.
Macintosh with one of the above OS installed and a USB port as a standard feature
Resolution: 1024 × 768 or more Colors: Thousands or more

Supported Camera

Can be used for RAW images, JPEG images or MOV movies shot with the cameras below.
EOS-1D X EOS-1D Mark IV
EOS-1Ds Mark III EOS-1D Mark III
EOS 5D Mark III EOS 5D Mark II
EOS 7D EOS 60D
EOS 50D EOS 40D
EOS REBEL T4i/650D EOS REBEL T3i/600D
EOS REBEL T2i/550D EOS REBEL T1i/500D
EOS DIGITAL REBEL XSi/450D EOS REBEL T3/1100D
EOS DIGITAL REBEL XS/1000D
_
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
Index
linked Digital Photo Professional.
2

Contents at a Glance

COPY
Downloading images from your camera to a computer
To batch download all the images to a computer p.6
To download to a computer selected images only p.7
To download images using a third-party card reader p.10
Camera settings from a computer
To set the camera owner’s name, copyright notice
and date/time
To set a Picture Style and apply to the camera p.16
To apply a Picture Style file to the camera p.18
To register a personal white balance in the camera p.20
To set a JPEG quality and apply to the camera p.21
To adjust a white balance setting and apply to the
camera
To register lens aberration correction/peripheral
illumination correction data for the lens in the camera
To set My Menu and apply to the camera p.24
p.12
p.22
p.22
Remote shooting
To shoot by controlling the camera from a computer
(Remote Live View shooting)
To shoot with accurate horizontal/vertical alignment p.43
To change the aspect ratio and shoot p.44
To shoot with another image displayed as overlay to
align several images at the same angle
To shoot by operating the camera p.52
To shoot movies p.53
To shoot with timer p.64
To shoot with flash p.66
p.27
p.47
Functions for use with other accessories sold separately
To shoot with the Wireless File Transmitter WFT-E2,
WFT-E2 II, WFT-E3, WFT-E4, WFT-E4 II, WFT-E5, WFT-E6, or WFT-E7 and check the images in real time
To start up the WFT-E2, WFT-E2 II, WFT-E3, WFT-
E4, WFT-E4 II, or WFT-E5 software from EU
p.81
p.82
Introduction
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
Index
Other
To register background music to the camera’s memory card
p.70
33
1
COPY

Downloading Images to your Computer

Basic operation such as preparing for downloading images to your computer (connecting your camera and computer), starting up EU, downloading images from your camera to your computer and quitting EU are explained here.
Introduction
Contents at
a Glance
Connecting the Camera and Computer..................... 5
Starting up EU ........................................................... 6
Batch Downloading Images to Your Computer ......... 6
Downloading Selected Images to Your Computer........ 7
Using the Camera to Download Images to Your
Computer......................................................................
Downloading Images with a Card Reader .................. 10
Downloading Images Using Digital Photo Professional ...
Downloading Images Using ImageBrowser EX .... 10
Downloading Images without Using Canon Software...
Quitting EU .............................................................. 10
10
10
Downloading
1
Camera
Settings
2
9
Remote
Shooting
3
Preferences
4
Reference
Index
4

Connecting the Camera and Computer

1D Mk IV
1D Mk IV
With , you can fix the plug to the camera with the cable protector to prevent the plug from disconnecting. For details on using, see p.84 to p.86.
1D X
1D Mk IV
1Ds Mk III
1D Mk III
COPY
To download to your computer images shot with your camera, you will need to connect your camera and computer using the interface cable provided with your camera.
Connect the large plug of the cable into the USB port
1
of your computer.
For the location and direction of the USB port, refer to the
computer User’s Manual.
Connect the small plug of the cable into the terminal
2
on your camera.
Cameras other than
With the < > mark on the plug facing the front of the camera,
connect it to the camera’s < > terminal or <A/V OUT / DIGITAL> terminal.
Introduction
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Once the plug is connected to the camera according to the steps
for your camera model, preparation for downloading images is complete. Continue with “Starting up EU”.
With the < > mark on the plug facing the back of the camera,
connect it to the camera’s <A/V OUT / DIGITAL> terminal.
Reference
Index
5

Starting up EU

EU Main window
1D Mk IV
7D
60D
REBELT4i
650D
REBELT3i
600D
REBELT2i
550D
REBELT3
1100D
REBELT1i
500D
Save File dialog box
COPY
When the camera’s power switch is set to < ON >, EU will start up, and the camera and computer will be able to communicate.
Set the camera’s power switch to < ON >.

Batch Downloading Images to Your Computer

You can batch download to your computer all the images saved on the memory card inserted in the camera that you have not already downloaded.
The downloaded images are sorted by date into folders and are then displayed in the main window of Digital Photo Professional (RAW image processing, viewing and editing software) (hereinafter DPP), which is linked to start up automatically, where you can check them immediately.
Click [Starts to download images].
1
Introduction
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
EU starts up, the main window appears, and your camera and
computer can now communicate. Continue with “Batch Downloading Images to Your Computer”.
The camera’s LCD monitor turns on when EU starts up.
For cameras other than
you can operate the camera and download images saved on the memory card inserted in the camera to your computer. Refer to your camera’s Instruction Manual for details.
cannot communicate with EU if the camera’s
Mode Dial is set to < >. Set the Mode Dial to a mode other than < >.
Reference
Index
The [Save File] dialog box appears and image downloading to
,
your computer begins.
The downloaded images are saved in the [Pictures] folder.When all images have been downloaded, DPP starts up
automatically and the downloaded images are displayed in DPP’s main window.
6
Check the downloaded images.
DPP Main window
When you download images, you can change the software that
starts up from DPP to ImageBrowser EX or other software in preferences ([Linked Software] window) (p.77).
You can change the save destination for images downloaded and
images to download in preferences ([Destination Folder] window, [Download Images] window) (p.74, p.75).
Downloading movie files may take some time due to the large file
size.
Downloading Selected Images to Your Computer
COPY
2
From the images saved in your camera’s memory card, you can select the ones you want and download them to your computer.
Click [Lets you select and download images].
1
Introduction
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Check the downloaded images in DPP.
For details on using DPP, refer to the “Digital Photo Professional Instruction Manual” (PDF electronic manual).
Continue with “Quitting EU” (p.10).
A viewer window appears and the images in the memory card
are displayed.
Preferences
4
Reference
Index
77
View the images and checkmark images to download.
Viewer window
Add check mark
You can click the [ ] button and extract images by a variety of criteria to select images to download.
Download image dialog box
Specify the save destination
Displays the save destination on the computer
COPY
2
Click the [Download] button.
3
The [Download image] dialog box appears.
Specify the save destination and then click the [OK]
4
button.
Introduction
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
Index
The [Save File] dialog box appears and image downloading to
your computer begins.
88
The images downloaded to your computer are displayed in the
In step 2, you can batch checkmark several images in sequence.
After clicking the first image you want to download, hold the < shift > key and click the last image, and [ ] will be displayed. By clicking the [ ] button, the selected images will be checkmarked in a batch.
For a list of viewer window functions, see p.88.
Using the Camera to Download Images to Your Computer
1D X
1Ds Mk III
1D Mk III
5D Mk III
5D Mk II
50D
40D
REBELT1i
500D
REBELXSi
450D
REBELXS
1000D
COPY
[Quick Preview] window.
If your camera has a direct image transfer function, you can use it to download to your computer the images saved on the memory card inserted in the camera. Refer to your camera’s Instruction Manual for details on its direct image transfer function.
This function is compatible with
Introduction
Contents at
a Glance
Downloading
1
The [Quick Preview] window allows you to quickly review the
downloaded images. You can also resize the [Quick Preview] window.
When all images have been downloaded, DPP starts up
automatically and the downloaded images are displayed.
To switch to the main window, click the [Main Window] button in
the viewer window.
.
Connect your camera and computer, and then start
1
up EU (p.5).
Operate the camera to transfer the images directly.
2
The images in the camera are saved to your computer.
When all images have been downloaded, Digital Photo Professional
starts up and the downloaded images are displayed.
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
Index
99
For users with a third-party card reader, you can also download to your
Downloading Images with a Card Reader
COPY
computer images stored in a memory card using the card reader. However, EU does not support image downloading using a card reader. For this reason, when downloading images using a card reader, use one of the following 3 procedures.
Downloading Images Using Digital Photo Professional
You can use DPP to download to your computer shot images from a memory card inserted in a third-party card reader connected to your computer.
For detailed instructions, refer to “Downloading Images Using Your Card Reader” in the “Digital Photo Professional Instruction Manual” (PDF electronic manual).
Downloading Images Using ImageBrowser EX
You can use ImageBrowser EX to download to your computer shot images from a memory card inserted in a third-party card reader connected to your computer.
For detailed instructions, refer to “ImageBrowser EX User Guide” (PDF electronic manual).

Quitting EU

Click the [Quit] button.
1
The window closes and EU quits.
Turn the camera’s power switch to < OFF >.
2
Disconnect the cable from the camera and computer.
3
Do not pull on the cable; hold the plug and pull out.
Introduction
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
Index
Downloading Images without Using Canon Software
To download images with a card reader without using Canon software such as DPP or ImageBrowser EX, copy to your computer the [DCIM] folder in the memory card. For more details about folder structures and files in the memory card, see p.83.
10
2
COPY

Setting the Camera from Your Computer

This section explains how to set the camera’s functions from EU.
Setting the Camera Owner’s Name, Copyright Notice
Introduction
Contents at
a Glance
and Date/Time............................................................
Available Settings by Camera Model.......................... 13
Setting up Camera Functions .................................. 14
Available Settings by Camera Model.......................... 15
Setting Picture Styles and Applying to the Camera.... 16
Selecting a Picture Style and Applying to the
Camera...................................................................
Changing Picture Style Settings and Applying to the
Camera...................................................................
Applying Picture Style Files to the Camera ............ 18
Saving White Balance to your Computer ....................
Registering Personal White Balance in the Camera ...
Setting JPEG Quality and Applying to the Camera .... 21
Adjusting White Balance and Applying to the Camera... Registering Lens Aberration Correction/Peripheral Illumination
Correction Data for the Lens in the Camera........................
12
16
17
19 20
22
22
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
Index
Setting My Menu and Registering to the Camera .....
24
11

Setting the Camera Owner’s Name, Copyright Notice and Date/Time

Capture window
COPY
You can set and apply to the camera, the camera owner’s name, copyright notice and date/time recorded as shooting information in shot images.
Connect your camera and computer, and then start
1
up EU
Click [Camera settings/Remote shooting].
(p.5).
Click the [ ] button.
3
2
Introduction
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
The capture window appears.
Reference
Index
The [Set-up menu] appears.
12
Click the required setting and specify each one.
Set-up menu
Available Settings by Camera Model
1Ds Mk III
1D Mk III
1D X
1D Mk IV
5D Mk III
5D Mk II
7D
60D
50D
REBELT4i
650D
REBELT3i
600D
REBELT2i
550D
REBELT1i
500D
REBELT3
1100D
40D
REBELXSi
450D
REBELXS
1000D
1D X
5D Mk III
7D
REBELT4i
650D
1D X
5D Mk III
7D
REBELT4i
650D
1D X
1D Mk IV
5D Mk III
5D Mk II
7D
60D
REBELT4i
650D
REBELT3i
600D
REBELT2i
550D
REBELT1i
500D
REBELT3
1100D
COPY
4
Available settings are displayed for the camera that is connected.
For more details, see “Available Settings by Camera Model”.
For a list of the capture window functions, see p.91.
Owner’s name
You can enter and set up to 31 characters as the camera owner’s
name.
Author*
You can enter and set up to 63 characters or symbols, including a
Copyright holder (copyright notice)*
You can enter and set up to 63 characters or symbols, including a
Date/Time/Zone*2
You can set the camera’s date/time and the time zone where images
You can retrieve the computer’s system time to sync the camera’s
You can set and cancel daylight savings time on
1
prefix, as the author’s name.
1
prefix, as the photo creation’s copyright holder (copyright notice).
were shot.
date and time.
(firmware version 2.0.0 or later) .
Introduction
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Setting
Owner’s name Author* Copyright holder
(copyright notice)* Date/Time/Zone* Live View/Movie func. set.
Firmware
1
1
2
3
*

  
Live View/Movie func. set.*
You can set whether the Live View function settings or Movie function
settings (p.27, p.53) are available or not.
Firmware
You can display the version of the camera’s firmware. You can update the firmware by clicking on this item.For more details on updating firmware, refer to the Canon’s website.
1
When the author or copyright holder (copyright notice) set is not
*
displayed in full, moving the cursor to the displayed setting item will display all the entered information as a pop-up.
2
*
Area setting is for (firmware version 2.0.0
or later) only.
3
Movie function settings are for
*
3
Reference
Index
only.
1313

Setting up Camera Functions

COPY
You can set and apply to the camera Picture Styles, personal white balance, JPEG quality and white balance adjustment.
Introduction
Click the [ ] button.
3
Connect your camera and computer, and then start
1
up EU
Click [Camera settings/Remote shooting].
(p.5).
2
The capture window appears.
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
The [Shooting menu] appears.
Index
14
Click the required setting and specify each one.
Shooting menu
Available Settings by Camera Model
1D X
1D Mk IV
1Ds Mk III
1D Mk III
5D Mk III
5D Mk II
7D
60D
50D
REBELT4i
650D
REBELT3i
600D
REBELT2i
550D
REBELT1i
500D
REBELT3
1100D
40D
REBELXSi
450D
REBELXS
1000D
1D X
1D Mk IV
5D Mk III
COPY
4
*1 Setting is possible for , but not for other models.*2 Setting is possible for , but not for other models.
Introduction
Available settings are displayed for the camera that is connected.
For more details, see “Available Settings by Camera Model”.
For a list of the capture window functions, see p.91.
Setting
Picture Style
You can set a Picture Style and apply it to the camera, in the same
way as operating from the camera (p.16).
Personal white balance
You can register to the camera a personal white balance file (p.20).
JPEG quality
You can set the JPEG image quality and apply it to the camera, in the
same way as operating from the camera (p.21).
White balance adjustment
You can adjust the white balance, in the same way as operating from
the camera (p.22).
Registering lens aberration correction/peripheral illumination correction data
You can register lens aberration correction/peripheral illumination
correction data for the lens to the camera or delete registered data from the camera (p.22).
HDR (High Dynamic Range) shooting
You can shoot photos with a wide dynamic range where clipping in
highlights and shadows has been reduced, and photos that appear like paintings (p.33).
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
Index
Picture Style Personal white balance * JPEG quality
White balance adjustment Registering lens aberration
correction/peripheral illumination correction data
HDR Shooting

1
 
1
*
–– ––
*
2
1515
You can set and apply Picture Styles to the camera, in the same way as
Setting Picture Styles and Applying to the Camera
1D X
1D Mk IV
5D Mk III
7D
60D
REBELT4i
650D
REBELT3i
600D
REBELT2i
550D
REBELT3
1100D
Picture Style window
[Auto] appears for Picture Styles only with
.
1D X
5D Mk III
REBELT4i
650D
REBELT3i
600D
COPY
operating from the camera. You can change the values for [Sharpness], [Contrast], [Saturation] and [Color tone] of each Picture Style and register up to three of your own Picture Styles in the camera as user­defined settings.
You can also register Picture Style files in the camera as user-defined settings you have downloaded from the Canon’s website or created with Picture Style Editor (Picture Style file creating software) (hereinafter PSE) and saved to your computer.
For
, registering
Picture Styles may take some time.
Selecting a Picture Style and Applying to the Camera
Click [Picture Style].
1
Click the Picture Style to be set in the camera.
2
The setting is applied to the camera and the display returns to
the [Shooting menu].
Introduction
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
The [Picture Style] window appears.
Reference
Index
1616
Changing Picture Style Settings and Applying
Cursor position
Default setting
Setting
COPY
to the Camera
You can set your own Picture Style [Sharpness], [Contrast], [Saturation] and [Color tone] and apply them to the camera, in the same way as operating from the camera.
Click [Detail set.].
1
The [Detail set.] dialog box appears.
Click the [Return] button.
3
The settings are applied to the camera, and the display returns to
the [Shooting menu].
Introduction
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Set by clicking the pointer on the slider for each
2
item.
If you select [Monochrome] for the Picture Style (p.16), the [Filter
effect] and [Toning effect] list boxes appear.
Reference
Index
1717
Applying Picture Style Files to the Camera
COPY
You can register up to three Picture Style files downloaded from the Canon’s website or created with PSE and saved to your computer, as user-defined settings in your camera.
Introduction
Click the [ ] button.
3
Contents at
a Glance
Click [Register User Defined style].
1
The [Register User Defined style] dialog box appears.
Select a tab from one of [User Defined 1]
2
to [User Defined 3].
The Load Picture Style window appears.
Select a Picture Style file and then click the [Open]
4
button.
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
Index
The Picture Style file is loaded.
1818
Click the [OK] button.
A Picture Style file is an extended function of Picture Style. For
more details on Picture Style files, refer to the Canon’s website.
The Picture Style files that you can apply to the camera are files
with the “.PF2” extension only.
For details on using PSE, refer to the “Picture Style Editor
Instruction Manual” (PDF electronic manual).
Saving White Balance to your Computer
1D X
1D Mk IV
COPY
5
The Picture Style file is registered in the camera.
You can save the adjustment results for an image’s white balance to your computer as a white balance file (extension “.WBD”). White balance files saved to your computer can be registered in the camera as personal white balances (p.20).
Start by registering a white balance in your camera after adjusting it in the [Remote Live View window] or [Test Shooting] window.
Click [Personal WB].
1
Introduction
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
The [Personal white balance settings] dialog box appears.
Index
1919
Select the white balance to be saved to your
Registering Personal White Balance in the Camera
1D X
1D Mk IV
COPY
2
computer and click the [Save] button.
White balance files created by adjusting the white balance of an image and saving the results can be registered in the camera as personal white balances.
Click [Personal WB].
1
Introduction
Contents at
a Glance
Downloading
1
Camera
Settings
2
In the window that appears, enter a filename, select a
3
save destination, and then click the [Save] button.
The white balance file is saved to your computer.
The [Personal white balance settings] dialog box appears.
Select the personal white balance to be registered
2
and click the [Open] button.
The file selection window appears.
Remote
Shooting
3
Preferences
4
Reference
Index
2020
Open the folder containing the saved white balance
Setting JPEG Quality and Applying to the Camera
1D X
1D Mk IV
1Ds Mk III
1D Mk III
COPY
3
file, select the file and then click the [Open] button.
The white balance file is loaded.The white balance files that you can register to the camera are
files with the “.WBD” extension.
You can set the JPEG image quality and apply it to the camera, in the same way as operating from the camera.
Introduction
Contents at
a Glance
Enter a title into the [Title] input field.
4
Click the [Apply to camera] button.
5
The personal white balance is registered on the camera.To register another setting, repeat step 2 to step 5.
Click the [Close] button.
6
The [Personal white balance settings] dialog box closes and the
display returns to the [Shooting menu].
Select a registered personal white balance on the
7
camera.
Select a registered personal white balance as the white balance.
For selecting personal white balance or manual white balance,
refer to “Setting the White Balance” in the camera’s Instruction Manual provided with your camera.
Click [JPEG quality].
1
The [JPEG Quality] window appears.
Click the setting position.
2
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
Index
The settings are applied to the camera.Higher values give a lower compression ratio and higher image
quality for any size.
Click [Return].
3
The display returns to the [Shooting menu].
2121
Introduction
Adjusting White Balance and Applying to the Camera
Displays the compensation value
Compensates amber
Compensates magenta
Compensates green
Compensates blue
Registering Lens Aberration Correction/Peripheral Illumination Correction Data for the Lens in the Camera
1D X
1D Mk IV
5D Mk III
5D Mk II
7D
60D
50D
REBELT4i
650D
REBELT3i
600D
REBELT2i
550D
REBELT1i
500D
REBELT3
1100D
COPY
You can adjust white balance, in the same way as operating from the camera.
Click [WB SHIFT].
1
The [WB SHIFT] window appears.
Click the compensation position.
2
You can register lens aberration correction/peripheral illumination correction data for the lens to the camera, or delete registered data from the camera.
For cameras where [Lens aberration correction] is displayed in the [Shooting menu], data is registered or deleted for lens peripheral illumination correction, distortion correction, and chromatic aberration correction. (Data for distortion correction and chromatic aberration correction is used during RAW processing on the camera.)
For cameras where [Peripheral illumin. correct.] is displayed in the menu, only lens peripheral illumination correction data is registered or deleted.
Click [Lens aberration correction] or [Peripheral
1
illumin. correct.].
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
The settings are applied to the camera.
Click [Return].
3
The display returns to the [Shooting menu].To revert the corrected values to the original values, follow the
procedure in step 2.
Index
The [Register lens aberration correction data] window or
[Register peripheral illumination correction data] window appears. Lenses for which correction data is registered in the camera are displayed with a check mark.
Window names that appear and data to be registered in the
camera differ depending on the camera. However, the following steps are the same.
2222
Select the lens category for which you want to
Register lens aberration correction data/Register peripheral illumination correction data window
For a list of the [Register lens aberration correction data] window
or [Register peripheral illumination correction data] window functions, see p.89.
Lens names displayed in the [Register lens aberration correction
data] window or [Register peripheral illumination correction data] window may be partially shortened depending on the lens type.
The EF 15mm f/2.8 Fisheye and EF 8-15mm f/4L USM Fisheye
are not compatible with [Register lens aberration correction data]/ [Register peripheral illumination correction data].
COPY
2
register correction data.
A list appears showing only the selected lens category.
Select the lens for which you want to register
3
correction data and click the [OK] button.
The correction data for the selected lens is registered in the
camera.
You can delete correction data from the camera by removing the
check mark from the registered lens and clicking the [OK] button.
Introduction
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
Index
2323

Setting My Menu and Registering to the Camera

COPY
You can register up to six frequently used menu items as My Menu and register them to the camera, in the same way as operating from the camera.
You can register top layer items of each tab as well as all items of Custom Functions.
Click the [ ] button.
3
Introduction
Contents at
a Glance
Connect your camera and computer, and then start
1
up EU
Click [Camera settings/Remote shooting].
(p.5).
2
The capture window appears.
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
Index
The [My Menu] appears.
24
Click [My Menu settings].
My Menu
My Menu settings window
For a list of the [My Menu settings] window functions, see p.90.
COPY
4
Introduction
Contents at
a Glance
Downloading
1
The [My Menu settings] window appears.
Select the item to be registered and click the [Add]
5
button.
The selected item is added to [Items that can be configured in My
Menu on the camera] on the left side of the window.
You can register up to six items with the above procedure.You can change the position of an item by selecting it and then
6
clicking the [ ] or [ ] button to move it.
Click the [Apply to camera] button.
The setting is applied to the camera.
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
Index
2525
3
COPY

Remote Shooting by Controlling the Camera from Your Computer

Introduction
From EU you can control the camera remotely, and by viewing the subject in the EU window, you can set the camera and shoot. You can also shoot by directly operating your camera even during remote shooting, or preset a time allowing the camera to shoot automatically with timer shooting.
Remote Live View Shooting ..................................... 27
HDR (High Dynamic Range) Shooting..................... 33
Remote Live View Window Functions...................... 35
Focusing Manually..................................................... 35
Focusing Using AF .................................................... 36
Focusing Using Quick Mode.................................. 36
Focusing Using Live Mode .................................... 38
Focusing Using Face Detection Live Mode ........... 39
Focusing Using Face+Tracking ............................. 39
Focusing Using FlexiZone-Multi ............................ 40
Checking the Depth of Field and Exposure ............... 40
White Balance with the Remote Live View Window .. 41
White Balance for Flash Photography ....................... 41
Displaying Grid Lines.................................................. 51
Shooting by Operating the Camera ......................... 52
Shooting Movies ...................................................... 53
Timer-controlled Shooting ....................................... 64
Timer Shooting ........................................................... 64
Interval Timer Shooting .............................................. 64
Bulb Exposures .......................................................... 65
Flash Shooting......................................................... 66
Registering Background Music to a Camera Memory
Card......................................................................... 70
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
Displaying an Electronic Level................................... 43
Changing the Aspect Ratio........................................ 44
Audio Recording Setting ............................................ 45
Audio Recording/Audio Recording Level ............... 46
Wind Filter Function............................................... 46
Overlaid Display Function.......................................... 47
Enlarging/Reducing an Overlay Image .................. 48
Rotating an Overlay Image .................................... 49
Setting the Composite Ratio of an Overlay Image
Moving an Overlay Image...................................... 50
Displaying a Different Overlay Image .................... 50
Hiding an Overlay Image ....................................... 51
..... 49
Index
26

Remote Live View Shooting

REBELT1i
500D
COPY
You can control your camera remotely from EU and shoot still images from your computer screen.
Also, the shot images are saved directly on your computer and you can recheck them using the linked software Digital Photo Professional (hereinafter DPP).
This function is effective for shooting large numbers of shots with fixed­framing such as for studio shooting.
Connect your camera and computer, and then turn
1
the camera’s power switch to < ON >.
EU starts up. cannot communicate with EU if the camera’s
Mode Dial is set to < >. Set the Mode Dial to a mode other than < >.
Click [Camera settings/Remote shooting].
2
The capture window appears.
Introduction
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
Index
27
Set the camera.
Drive mode setting
Click while holding down the <control> key under the setting item and select settings from the menu*
1
that appears
(
)
1D X
1D Mk IV
5D Mk III
5D Mk II
7D
60D
50D
REBELT4i
650D
REBELT3i
600D
REBELT2i
550D
REBELT1i
500D
REBELT3
1100D
Mirror lockup menu display and setting
Click while holding down the <control> key under the setting item and select settings from the menu*
1
that appears
(
)
1D X
1D Mk IV
5D Mk III
7D
60D
REBELT4i
650D
REBELT3i
600D
REBELT2i
550D
Double-click the setting item, and select the setting*
1 *2
1D X
1D Mk IV
5D Mk III
5D Mk II
7D
60D
50D
REBELT4i
650D
REBELT3i
600D
REBELT2i
550D
REBELT1i
500D
REBELT3
1100D
1D X
5D Mk III
REBELT4i
650D
1D X
5D Mk III
REBELT4i
650D
1D X
5D Mk III
REBELT4i
650D
COPY
3
*1 You can also use the scroll-wheel on your mouse to select
settings for items in the settings window and menus that appear. You cannot use the scroll-wheel in the mirror lockup menu.
*2 On
Introduction
Contents at
a Glance
, you can click the Exposure level/AEB level item while holding down the <control> key and perform AEB setting using the <shift> key + scroll-wheel.
You can also use the functions of the [Shooting menu] (p.14).The settings that cannot be set in the capture window can be set
by operating the camera.
On , a warning lamp blinks
during the countdown for self-timer shooting and the countdown time is displayed in the area for the number of possible shots.
Mirror lockup settings are available when the camera mode is P,
Tv, Av, M, A-DEP or B.
During mirror lockup, the mirror lockup icon blinks.When shooting with auto exposure on
, the shutter speed or aperture blinks to indicate under-
exposure or over-exposure conditions.
When shooting with manual exposure on
, the metering value is displayed in real time in
the exposure level area.
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
Reference
Index
2828
Click the [ ] button.
Click
Live View shoot. window
Click
1 Ds Mk III
1D Mk III
50D
40D
REBELXSi
450D
REBELXS
1000D
COPY
4
Set the Live View function.
5
Click [Live View/Movie func. set.], and click [Enable] in the [Live
View shoot.] window that appears.
Introduction
Contents at
a Glance
Downloading
1
Camera
Settings
2
Remote
Shooting
3
Preferences
4
The [Set-up menu] appears.
Reference
Index
For cameras other than
, the [Live View/Movie func. set.] window appears. For details on specifying settings, see the next page.
2929
Loading...
+ 71 hidden pages