Canon imageFORMULA P-150 User Manual
User Manual
• Please read this manual before operating this scanner.
• After you finish reading this manual, store it in a safe
place for future reference.
READ CAREFULLY BEFORE OPENING THE SEALED
DISK PACKAGE
CANON SOFTWARE LICENSE AGREEMENT
IMPORTANT-READ THIS AGREEMENT BEFORE OPENING THE
SEALED DISK PACKAGE! BY OPENING THE SEALED DISK
PACKAGE, YOU ARE DEEMED TO AGREE TO BE BOUND BY
THIS AGREEMENT.
This legal document is a license agreement between you and Canon
Electronics Inc. (“Canon”). BY OPENING THE SEALED DISK
PACKAGE, YOU ARE DEEMED TO AGREE TO BE BOUND BY THE
TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE
TERMS OF THIS AGREEMENT, DO NOT OPEN THE SEALED DISK
PACKAGE AND PROMPTLY RETURN THE CANON SCANNER,
THE DISK PACKAGE CONTAINING SCANNER DRIVER
SOFTWARE PROGRAMS AND/OR SCANNER UTILITY
SOFTWARE PROGRAM PROPRIETARY TO CANON OR ITS
LICENSOR (THE “SOFTWARE”) AND THE ACCOMPANYING
DOCUMENTATION AND OTHER ITEMS TO THE PLACE WHERE
YOU OBTAINED THEM FOR A REFUND BEFORE THEY ARE
USED OR OPENED OR UNPACKED.
In consideration of the right to use the SOFTWARE, you agree to
abide by the terms and conditions of this Agreement.
1. GRANT OF LICENSE: Canon grants you the personal, nonexclusive right to use the SOFTWARE only on a single computer. You
shall need to obtain multiple licenses separately from Canon when
you shall install the SOFTWARE on multiple computers.
You shall not assign, sublicense, sell, rent, lease, loan, convey or
transfer to any third party, or send or bring the SOFTWARE out of the
country where you originally obtain it to other countries without
required authorization of applicable governments, or copy, duplicate,
translate or convert to another programming language the
SOFTWARE or accompanying documentation, except as expressly
provided herein.
Except as expressly permitted under the applicable law, you shall not
alter, modify, disassemble, decompile or otherwise reverse engineer
the SOFTWARE or accompanying documentation and you also shall
not have any third party do so.
2. BACK-UP COPY: You may make one copy of the SOFTWARE
solely for a back-up purpose or copy the SOFTWARE onto the
permanent storage device (e.g. a hard disk) of your computer and
retain the original for a back-up purpose. Except as expressly
permitted under the applicable law, any other copying of the
SOFTWARE is a violation of this Agreement. You must reproduce and
include the copyright notice on the back-up copy.
3. SUPPORT AND UPDATE: Canon, Canon’s affiliate, their
distributor or dealer is not responsible for maintaining or helping you
to use the SOFTWARE. No updates, fixes or support will be made
available for the SOFTWARE.
4. LIMITED WARRANTY AND DISCLAIMER OF INDEMNITY:
Canon, Canon’s affiliate, their distributor or dealer will not guarantee
uninterrupted service, or absence or correction of errors. Therefore,
the SOFTWARE is licensed on an “AS IS” basis without warranty of
any kind. The diskette on which the SOFTWARE is recorded is
warranted against defective material or workmanship under normal
use for a period of ninety (90) days from the date you purchased the
same as evidenced by a receipt or otherwise. The limited warranty
does not apply if the failure of the diskette resulted from accident,
abuse or misapplication of the SOFTWARE and shall not extend to
anyone other than the original user of the SOFTWARE.
CANON, CANON’S AFFILIATE, THEIR DISTRIBUTOR OR DEALER
DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE
OR ACCOMPANYING DOCUMENTATION.
NEITHER CANON, CANON’S AFFILIATE, THEIR DISTRIBUTOR
NOR DEALER IS LIABLE FOR ANY LOSS OR DAMAGE
INCLUDING CONSEQUENTIAL OR INCIDENTAL LOSS OR
DAMAGE SUCH AS LOSS OF PROFITS, EXPENSE OR
INCONVENIENCE, WHATSOEVER CAUSED BY OR ARISING OUT
OF THE SOFTWARE, ACCOMPANYING DOCUMENTATION OR
THE USE THEREOF.
2
CANON, CANON’S AFFILIATE, THEIR DISTRIBUTOR OR DEALER
SHALL HAVE NO OBLIGATION TO INDEMNIFY YOU AGAINST
ANY CLAIM OR SUIT BROUGHT BY A THIRD PARTY ALLEGING
THAT THE SOFTWARE, ACCOMPANYING DOCUMENTATION OR
THE USE THEREOF INFRINGES ANY INTELLECTUAL PROPERTY
OF SUCH THIRD PARTY.
THE ABOVE IS CANON’S ENTIRE LIABILITY AND YOUR
EXCLUSIVE REMEDY IN CONNECTION WITH THE SOFTWARE
AND ACCOMPANYING DOCUMENTATION.
5. TERM: This Agreement is effective upon opening the sealed disk
package and remains in effect until terminated. You may terminate
this Agreement by destroying the SOFTWARE and any copy thereof.
This Agreement will also terminate if you fail to comply with any of the
terms of this Agreement. In addition to Canon enforcing its respective
legal rights, you must then promptly destroy the SOFTWARE and any
copy thereof.
6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE: The
SOFTWARE is provided with RESTRICTED RIGHTS. Use,
duplication or disclosure is subject to restrictions as set forth in either
subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARs 252.227-7013 or subparagraph (c) (1) and
(2) of the Commercial Computer Software Restricted Rights Clause at
FAR 52.227-19, as applicable.
7. SEVERABILITY: In the event that provision of this Agreement is
declared or found to be illegal by any court or tribunal of competent
jurisdiction, such provision shall be null and void with respect to the
jurisdiction of that court or tribunal and all the remaining provisions of
this Agreement shall remain in full force and effect.
8. ACKNOWLEDGEMENT: BY OPENING THE SEALED DISK
PACKAGE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS
AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY
ITS TERMS AND CONDITIONS. YOU ALSO AGREE THAT THIS
AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT
OF AGREEMENT BETWEEN YOU AND CANON CONCERNING
THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL
PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR WRITTEN,
AND ANY OTHER COMMUNICATIONS BETWEEN YOU AND
CANON RELATING TO THE SUBJECT MATTER HEREOF. NO
AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE
UNLESS SIGNED BY A DULY AUTHORIZED REPRESENTATIVE
OF CANON.
Should you have any questions concerning this Agreement, or if you
desire to contact Canon for any reason, please write to Canon’s local
affiliate.
3
FCC REGULATIONS (For 120 V model)
Document Scanner, Model M111011
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in
Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless
otherwise specified in the manual. If such changes or modifications
should be made, you could be required to stop operation of the
equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success NY 11042, U.S.A.
Tel. No. (516)328-5000
RADIO INTERFERENCE REGULATIONS (For 120 V
models)
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus as set out in the interferencecausing equipment standard entitled “Digital Apparatus”, ICES-003 of
the Industry Canada.
RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE
(For 120 V models)
Cet appareil numérique respecte les limites de bruits radioélectriques
applicables aux appareils numériques de Classe B prescrites dans la
norme sur le matériel brouilleur: “Appareils Numériques”, NMB-003
édictée par l’Industrie Canada.
International ENERGY STAR® Office Equipment Program
As an ENERGY STAR® Partner, CANON
ELECTRONICS INC. has determined that this
machine meets the ENERGY STAR
guidelines for energy efficiency.
The International ENERGY STAR
Program is an international program that promotes
energy saving through the use of computers and other office
equipment. The program backs the development and dissemination of
products with functions that effectively reduce energy consumption. It
is an open system in which business proprietors can participate
voluntarily. The targeted products are office equipment, such as
computers, monitors, printers, fax, machine, copiers, and scanners.
The standards and logos are uniform among participating nations.
®
Program
®
Office Equipment
European Union (and EEA) only.
This symbol indicates that this product is not to be disposed
of with your household waste, according to the WEEE
Directive (2002/96/EC) and your national law. This product
should be handed over to a designated collection point,
new similar product or to an authorized collection site for recycling
waste electrical and electronic equipment (EEE). Improper handling of
this type of waste could have a possible negative impact on the
environment and human health due to potentially hazardous
substances that are generally associated with EEE. At the same time,
your cooperation in the correct disposal of this product will contribute
to the effective usage of natural resources. For more information
about where you can drop off your waste equipment for recycling,
please contact your local city office, waste authority, approved WEEE
scheme or your household waste disposal service. For more
information regarding return and recycling of WEEE products, please
visit www.canon-europe.com/environment
(EEA: Norway, Iceland and Liechtenstein)
e.g., on an authorized one-for-one basis when you buy a
.
4
Für EMVG
Dieses Produkt ist zum Gebrauch im Wohnbereich, Geschäfts-und
Gewerbebereich sowie in Kleinbetrieben vorgesehen.
Für 3. GPSGV
“Maschinenlärminformations-Verordnung 3. GPSGV: Der höchste
Schalldruckpegel beträgt 70 dB(A) oder weniger gemäß EN ISO
7779”
Model Names
The following names may be provided for the safety regulations in
each sales region of the Document Scanner.
P-150: Model M111011
Trademarks
• Canon and the Canon logo are registered trademarks, of Canon Inc.
in the United States and may also be trademarks or registered
trademarks in other countries.
• imageFORMULA is a trademark of CANON ELECTRONICS INC.
• Microsoft, Windows, and Windows Vista are registered trademarks
or trademarks of Microsoft Corporation in the United States and
other countries.
• Microsoft product screen shot(s) reprinted with permission from
Microsoft Corporation.
• Adobe, Acrobat, and Adobe Reader are registered trademarks or
trademarks of Adobe Systems Incorporated in the United States and
other countries.
• ISIS is a trademark of EMC Corporation in the United States.
• Other product and company names herein are, or may be, the
trademarks of their respective owners.
Copyright
Copyright 2009 by CANON ELECTRONICS INC. All rights reserved.
No part of this publication may be reproduced or transmitted in any
form or by any means, electronic or mechanical, including
photocopying and recording, or by any information storage or retrieval
system without the prior written permission of CANON
ELECTRONICS INC.
Disclaimers
The information in this document is subject to change without notice.
CANON ELECTRONICS INC. MAKES NO WARRANTY OF ANY
KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR
IMPLIED, EXPECT AS PROVIDED HEREIN, INCLUDING WITHOUT
LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY,
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
OF USE OR NON-INFRINGEMENT. CANON ELECTRONICS INC.
SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR
EXPENSES RESULTING FROM THE USE OF THIS MATERIAL.
CANON ELECTRONICS INC. IS NOT LIABLE FOR THE STORAGE
AND HANDLING OF DOCUMENTS SCANNED WITH THIS
PRODUCT, OR THE STORAGE AND HANDLING OF THE
RESULTING SCANNED IMAGE DATA.
IF YOU INTEND TO DISCARD THE ORIGINALS OF THE SCANNED
DOCUMENTS, YOU ARE RESPONSIBLE FOR INSPECTING THE
SCANNED IMAGES AND VERIFYING THAT THE DATA IS INTACT.
THE MAXIMUM LIABILITY OF CANON ELECTRONICS INC.
UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE
OF THE PRODUCT COVERED BY THE WARRANTY.
5
Introduction
Thank you for purchasing the Canon imageFORMULA P-150
Document Scanner.
Please read the following manuals carefully and familiarize yourself
with the functions of the scanner before using it to ensure that you
sufficiently understand the functions, and make the most of the
scanner’s capabilities. After reading the manuals, store them in a safe
place for future reference.
About the Manuals
This scanner comes with the following manuals.
● Reference Guide
This manual describes how to set up the scanner. Read this manual
when you first use the scanner.
● User Manual (this manual)
This manual contains the operating procedures of the scanner.
Hint
• All of the manuals are stored on the setup disc as electronic
manuals in PDF format.
• The User Manual (electronic manual) is saved to the following
location when the software is installed.
Symbols Used in This Manual
The following symbols are used in this manual to explain procedures,
restrictions, handling precautions, and instructions that should be
observed for safety.
WARNING
Indicates a warning concerning operations that may lead to death
or injury to persons if not performed correctly. To use the scanner
safely, always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury to
persons, or damage to property if not performed correctly. To use
the scanner safely, always pay attention to these cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to
read these items carefully to operate the scanner correctly, and
avoid damaging the scanner.
Hint
Indicates a clarification of an operation, or contains additional
explanations for a procedure. Reading these notes is highly
recommended.
6
Layout of This Manual
This manual contains the following information.
■ Preparation
This section describes the features of the scanner, names and
functions of the parts, and how to set up the scanner.
■ Documents
This section describes the types of document that can be handled and
how to load them.
■ Scanning Procedure
This section describes how to scan documents using the supplied
software. It also describes how to configure the driver for scanning.
■ Maintenance
This section describes how to clean the scanner and replace
consumable parts.
■ Troubleshooting
This section describes how to resolve problems when trouble occurs.
■ Appendix
This section contains information related to the specifications and
warranty of the scanner.
7
Table of Contents
Introduction .........................................................................6
Symbols Used in This Manual...................................................... 6
Layout of This Manual .................................................................. 7
Important Safety Instructions.............................................9
Installation Location ..................................................................... 9
Moving the Scanner ..................................................................... 9
AC Adapter (Not Supplied)........................................................... 9
Handling ....................................................................................... 9
Disposal ..................................................................................... 10
Preparation .............................................................. 11
Features........................................................................ 11
Names and Functions of Parts ................................... 13
Setup............................................................................. 15
System Requirements.......................................................... 15
Software Installation ............................................................. 15
Connecting the Scanner to a Computer .................... 19
Auto Start Switch.................................................................. 19
Connecting the Scanner to the Computer............................ 19
Power Supply ............................................................... 20
Turning ON the Power ......................................................... 20
Turning OFF the Power........................................................ 21
Using an Auxiliary Power Supply ......................................... 22
Documents............................................................... 23
Types of Document You Can Scan ............................ 23
Loading a Document ................................................... 24
Scanning Procedure ............................................... 26
Supplied Software........................................................ 26
Scanning with CaptureOnTouch Lite......................... 27
Scanning Procedure............................................................. 27
Environmental Settings ........................................................ 31
Quitting CaptureOnTouch Lite ............................................. 32
Scanning with CaptureOnTouch ................................ 33
Connecting the Scanner to a Computer............................... 34
Starting CaptureOnTouch .................................................... 34
Setting Scanning Conditions ................................................ 35
Basic Scanning Condition Settings ...................................... 35
Setting the Output Method ................................................... 36
Scan First............................................................................. 38
Select Scan Job ................................................................... 41
Environmental Settings............................................... 45
[Basic settings] Tab.............................................................. 45
[E-mail settings] Tab............................................................. 46
Scanner Driver Settings............................................... 47
Configuration and Functions of the Scanner Driver ............. 47
Basic Scanning Condition Settings ...................................... 48
Scan Panel .................................................................... 54
Maintenance............................................................ 55
Daily Maintenance........................................................ 55
Cleaning the Outside of the Scanner ................................... 55
Cleaning the Inside of the Scanner ...................................... 55
Cleaning the Scanning Glass, Separation Pad and
Rollers .................................................................................. 55
Replacing Consumable Parts...................................... 57
Replacing the Feed Rollers.................................................. 57
Replacing the Separation Pad.............................................. 59
Resetting the Counters......................................................... 60
Troubleshooting..................................................... 61
Common Problems and Solutions.............................. 61
Software Troubleshooting .................................................... 63
Questions and Answers .............................................. 64
Clearing a Paper Jam................................................... 66
Uninstalling the Software............................................ 68
Appendix................................................................. 70
Specifications............................................................... 70
Index...............................................................................72
8
Important Safety Instructions
To ensure the safe operation of this scanner, make sure to read the
safety warnings and precautions described below.
Installation Location
The performance of this scanner is affected by the environment in
which it is installed. Make sure that the location where the scanner is
installed meets the following environmental requirements.
● Provide adequate space around the scanner for operation,
maintenance, and ventilation.
4" (100 mm)
4" (100 mm)
● Provide adequate space in front of the scanner, as scanned
documents are ejected from the front.
● Avoid installing the scanner in direct sunlight. If this is unavoidable,
use curtains to shade the scanner.
● Avoid locations with excessive dust. Dust can have negative effects
on the inner parts of the scanner.
● Avoid warm or humid locations, such as in the vicinity of a water
faucet, water heater, or humidifier, and avoid locations where the
fumes from ammonia, paint thinner, or other volatile chemicals may
be present.
● Avoid locations that are unstable or subject to vibration.
4" (100 mm)
● Avoid exposing the scanner to rapid changes in temperature. If the
room in which the scanner is installed is cold but rapidly heated,
water droplets (condensation) may form inside the scanner. This
may result in a noticeable degradation in scanning quality. The
following conditions are recommended for optimal scanning quality:
Room temperature: 59 to 90.5°F (15 to 32.5°C)
Humidity: 25 to 80% (RH)
● Avoid installing the scanner near equipment that generates a
magnetic field (e.g., speakers, televisions, or radios).
Moving the Scanner
● When moving the scanner, make sure to carry it with both hands so
as not to drop it. The scanner weighs approximately 2.2 lb (1.0 kg).
● Make sure to disconnect any USB cables and AC adapters (not
supplied) when moving the scanner. If the scanner is carried with
these items connected, the plugs and connectors may be damaged
or cause the scanner to fall and result in personal injury or damage
to the scanner.
AC Adapter (Not Supplied)
● When using an AC adapter (not supplied) to power the unit, make
sure to read the operating manual for the AC adapter.
● Use only recommended AC adapters. In addition, do not use these
AC adapters with devices other than the scanner.
● Using the AC adapter, you can obtain better scanning speed than
when using the USB cable by itself.
● If you have any questions regarding the power supply, contact your
local authorized Canon dealer or service representative for further
information.
Handling
WARNING
● Never place alcohol, benzene, paint thinner, or other flammable
substances near the scanner.
9
● Do not cut, damage, or modify the USB cable or power supply USB
cable. Do not place heavy objects on the cable, and do not pull or
excessively bend the cable.
● Never connect the USB cable or power supply USB cable when
your hands are wet.
● Do not knot or coil the USB cable or power supply USB cable, as
this may result in a fire or electric shock. When connecting the
cable, make sure that the power plug is securely and completely
inserted into the power connector.
● Use only the USB cable or power supply USB cable supplied with
the scanner.
● Do not attempt to dismantle the scanner or modify it in any way, as
this is dangerous and may result in a fire or electric shock.
● Do not use flammable aerosol spray products near the scanner.
● When cleaning the scanner, turn the scanner OFF and disconnect
the USB cable or power supply USB cable.
● Clean the scanner using a slightly dampened cloth that has been
well wrung out. Never use alcohol, benzene, paint thinner, or any
other flammable substance.
● If the scanner makes strange noises, or gives off smoke, heat, or
strange odors, or the scanner does not function or other
abnormalities occur when you use the scanner, immediately turn
the scanner OFF, and disconnect the USB cable or power supply
USB cable. Then, contact your local authorized Canon dealer or
service representative for further information.
● Do not drop the scanner, or subject it to impact or strong shock.
Should the scanner ever become damaged, immediately close the
feed tray, turn the scanner OFF, and disconnect the USB cable or
power supply USB cable. Then, contact your local authorized
Canon dealer or service representative for further information.
● Before moving the scanner, make sure to close the feed tray, turn
the scanner OFF, and disconnect the USB cable or power supply
USB cable.
CAUTION
● Do not install the scanner on a surface that is unstable, tilted, or
subject to excessive vibrations. Doing so may cause the scanner to
fall, resulting in personal injury or damage to the scanner.
● Never place small objects, such as staples, paper clips, or jewelry
on the scanner. These items may fall into the scanner and cause a
fire or electric shock. If such objects ever fall inside the scanner,
immediately close the feed tray, turn the scanner OFF, and
disconnect the USB cable or power supply USB cable. Then,
contact your local authorized Canon dealer or service
representative to have the unit serviced.
● Do not locate the scanner in a humid or dusty location. Doing so
may result in a fire or electric shock.
● Do not place objects on top of the scanner. Such objects may tip or
fall over, resulting in personal injury.
● When disconnecting the USB cable, grasp it firmly by its connector.
Do not pull directly on the USB cable, as this may damage or
expose the cable’s internal wiring, resulting in a fire or electric
shock.
● Leave sufficient space around the USB cable or power supply USB
cable so that it can be disconnected easily. If objects are placed
around the USB cable or power supply USB cable, you will be
unable to disconnect it in an emergency.
● Do not allow water or flammable substances (alcohol, benzene,
paint thinner, etc.) to spill inside the scanner, as this may result in a
fire or electric shock.
● If you will not be using the scanner for an extended period of time,
such as during consecutive holidays, disconnect the USB cable or
power supply USB cable for safety.
● Do not wear loose clothing or jewelry that may get caught in the
scanner while you are using it. This may result in personal injury. Be
extra careful of neckties and long hair. If anything becomes caught
in the scanner, immediately disconnect the power to stop the
scanner.
● Be careful when placing paper in the scanner and when removing
jammed paper. It is possible to cut your hand on the edge of a sheet
of paper.
Disposal
When disposing of the scanner, make sure to follow the local
ordinances and laws or consult with your local authorized Canon
dealer.
10
Preparation
Features
The scanner has the following features.
Compact Size
The scanner has a compact size of 11" (W) × 1.57" (H) × 3.74" (D)
(280 mm (W) × 40 mm (H) × 95 mm (D)) when the document feed and
eject trays are closed.
Bus-Powered
The scanner is capable of scanning at a speed of 12 black-and-white
pages per minute*
without a power supply, when using the bus-powered single USB
cable.
1
and 10 color pages per minute*2, even in places
Auto Start Function
The CaptureOnTouch Lite software that comes preinstalled in the
scanner can be started by turning ON the Auto Start switch on the rear
panel. Connecting a computer to the scanner enables scanning even
when the driver is not installed.
Auto Power ON/OFF
This feature automatically turns the power ON or OFF when the feed
tray is opened or closed.
Equipped with Feeder
Up to 20 pages of a document can be loaded and then fed
continuously, or one at a time.
High-speed Scanning
The combined use of the USB cable with the power supply USB cable,
or an AC adapter (sold separately), enables scanning at a faster rate
(15 black-and-white pages per minute*
3
minute*
).
1
and 10 color pages per
CaptureOnTouch
When the bundled CaptureOnTouch software is installed, you can
perform scanning with a variety of scanning methods, ranging from a
normal scan, to a scan that involves a series of steps and which is
performed by registering a job.
Color and Grayscale Support
The scanner is capable of scanning a document in 24-bit color or 256level grayscale.
Two-Sided Scanning
The scanner supports one-sided and two-sided scanning. Using the
skip blank pages function enables you to scan without worrying about
whether to scan one side or both sides of a document because
scanned images of blank pages are not saved.
Document Size Auto Detection
This feature enables automatic detection of the page size of a
scanned document. The space around the edges of documents can
be omitted during scanning, even for non-standard size documents.
Deskew
Even if a document is slanted when fed into the scanner, the scanned
image can be straightened.
Text Enhanced Mode
Advanced Text Enhancement II is provided to improve the readability
when scanning documents in which the background is uniform and
both the text and background are light.*
4
Drop-Out Color
This feature makes it possible to eliminate scanning one specific color
(red, green, or blue) of a document.
11
Prescan
This feature allows you to scan just the first page of a document,
confirm the scanned image and adjust the brightness and contrast,
and then scan the remaining pages of the document.
Scan First
Pressing the Start button on the scanner automatically starts
CaptureOnTouch and scans the document in the feed tray when you
use the Scan First function.
Auto Detection of Document in Feeder
An automatic start function is provided for detecting when a document
is placed in the feeder and then starting scanning automatically.
1
When an A4/LTR size document (single side) is scanned at 200 dpi
*
in grayscale
2
When an A4/LTR size document (single side) is scanned at 200 dpi
*
in 24-bit color
3
When an A4/LTR size document (single side) is scanned at 200 dpi
*
in 24-bit color
4
This feature may not work effectively for some documents
*
12
Names and Functions of Parts
Front View
BA
A Power Indicator
When the power of the scanner is ON, this indicator displays the
status of the scanner as shown below.
Power Indicator Meaning
Lit The power of the scanner is ON.
• Paper is jammed.
• A double feed has been detected and the
Flashing
IMPORTANT
The power indicator may blink slowly when the USB cable is
connected and the feed tray is opened. When this occurs, wait for
the power indicator to stop blinking and light steadily before using
the scanner.
scanner has stopped.
• The top unit is open.
• Another scanner error has occurred.
C
D
E
F
G
A4
B5
LTR
A5
A5
B5
A4
LTR
H
I
B Document Feed Tray
This tray is for feeding documents. Open it when scanning
documents.
C Document Guides
These guides ensure documents are fed straight (one on the left
and right sides). Raise the guides when loading a document, and
then align them to both sides of the document to be scanned.
D Feeder Cover Release Lever
Pull this lever to open the feeder cover when cleaning the scanner.
E Feeder Cover
Open this when cleaning the scanner.
F Eject Outlet
This outlet is for ejecting documents when scanning is completed.
13
G Feed Extension Plate
Open this plate to support the document when loading a long
document.
H Feed Inlet
Insert the document to be scanned.
I Start Button
Press this button when you want to start scanning the document
loaded in the feed tray.
External Dimensions Diagram
Rear View
A B C D
A USB Connector
Connect the USB cable supplied with the scanner (or one that
supports Hi-Speed USB 2.0).
B Auto Start Switch
Use this switch to change the operation mode of the scanner.
C Kensington Slot
Connect a key chain to prevent theft.
D Power Connector
Connect the supplied power supply USB cable or a separately sold
AC adapter.
Hint
This scanner does not have a power switch. For details, see page 20.
7.96" (202.2 mm)
4.74" (120.4 mm)
11" (280 mm)
1.57" (40 mm)
3.74" (95 mm)
8.77" (222.7 mm)
14
Setup
System Requirements
The following system requirements are recommended for optimal use
of this scanner.
Personal Computer
CPU: Intel Core 2 Duo 1.8 GHz or higher
Memory: At least 1 GB
Hard disk: At least 1 GB of free space
USB interface: Hi-Speed USB 2.0
Monitor: Resolution of 1,024 × 764 (XGA) or higher
Optical drive: Drive capable of reading DVDs
Operating System
• Microsoft Windows 2000 Professional with Service Pack 4 or later
• Microsoft Windows XP with Service Pack 3 or later
• Microsoft Windows XP x64 Edition with Service Pack 2 or later
(32-bit and 64-bit editions)
• Microsoft Windows Vista with Service Pack 1 or later (32-bit and
64-bit editions)
Other
ISIS compatible application software or TWAIN compatible application
software that operates normally in the system environment described
above.
Software Installation
Install the following software required for using the scanner from the
supplied setup disc.
• CaptureOnTouch
This is a scanning utility designed specifically for the scanner.
• Scanner Driver
This is the scanner driver for the scanner.
IMPORTANT
• Connect the scanner to the computer before you install the
software.
• Log on with administrator privileges.
• Exit all other applications before you install the software.
Hint
If you only use CaptureOnTouch Lite that comes preinstalled in the
scanner, the software does not need to be installed.
1
Turn ON the computer.
2
Insert the software setup disc into the DVD drive of the
computer.
3
Click [Typical Installation].
15
Hint
When you want to reinstall software that you previously
uninstalled, select [Custom Installation] and specify the
uninstalled software.
4
Click [Install].
5
Click [Next].
6
Read the license agreement, and click [Yes] if you agree
to it.
7
Click [Next].
16
8
Click [Finish] when installation of the driver is complete.
9
Click [Next].
10
Read the license agreement, and click [Yes] if you agree
to it.
11
Click [Next].
17
12
Click [Finish] when installation of CaptureOnTouch is
complete.
13
Click [Next].
14
Click [Finish] when installation of the User’s Manual is
complete.
15
Click [Exit] to finish the software installation.
18
16
Remove the software setup disc from the DVD drive.
Connecting the Scanner to a Computer
Use the supplied USB cable to connect the scanner to a computer.
When you connect the scanner, the Auto Start switch on the scanner
needs to be turned ON or OFF depending on how you will use the
scanner.
Auto Start Switch
There is an Auto Start switch at the rear of the scanner for setting
whether to operate the scanner as a storage device.
Auto Start
OFF ON
Depending on the position of the Auto Start switch, the scanner
operates as shown below.
Switch
Position
ON
OFF
The scanner is recognized as a storage device by
the computer. Starting CaptureOnTouch Lite
preinstalled in the scanner enables you to perform
scanning on a computer without the scanner
driver installed. (However, you cannot store
scanned images or any other data on the
scanner.)
The scanner is recognized as a scanning device
by the computer. You can connect the scanner to a
computer with the scanner driver installed, and
perform scanning using an application, such as
the supplied CaptureOnTouch.
Scanner Operation
IMPORTANT
• Turn the Auto Start switch ON or OFF before you connect the
scanner to a computer. If it is turned ON or OFF after the scanner is
connected to a computer, the scanner may not operate properly.
• When you use the scanner with the Auto Start switch turned ON, the
computer needs to be started before you connect the scanner to
the computer. If the scanner is connected to a computer that is not
started and the feed tray of the scanner has been opened to turn
ON the power, the computer may not be able to start.
Connecting the Scanner to the Computer
Use the supplied USB cable to connect the scanner to the computer
as shown below.
IMPORTANT
• Take care not to disconnect the USB cable while data is being
transferred between the scanner and computer during scanning.
• The USB connector to which the scanner is connected on your
computer must be one capable of supplying 500 mA of power.
Using a USB Hub
The scanner cannot be used when it is connected to a computer via a
bus-powered USB hub. A self-powered USB hub can be used, but
operation is not guaranteed.
19
Power Supply
The power of the scanner is designed to turn ON when the feed tray
is opened or closed. To turn the power ON or OFF, operate the
scanner as described below.
Turning ON the Power
1
Press the feed tray release lever, and lift the areas
indicated below.
2
Open the feed tray.
The scanner turns ON, and the power indicator lights.
A4
B5
LTR
A5
A5
B5
A4
LTR
3
Raise the document guides and feed extension guides.
A4
B5
LTR
A5
A5
B5
A4
LTR
20
Turning OFF the Power
1
Close the feed extension guides and lower the document
guides.
A4
B5
LTR
A5
A5
B5
A4
LTR
2
Close the feed tray.
A4
B5
LTR
A5
A5
B5
A4
LTR
3
Push the section (front cover) at the front of the feed tray
to close it.
IMPORTANT
Do not close the feed tray while the document guides are spread
open. This can damage to the scanner and result in malfunction.
IMPORTANT
• When not using the scanner, close the scanner's Document Feed
Tray or disconnect the USB cable.
• When transporting the scanner, make sure to close the front cover
beforehand. Failure to do so may result in the feed tray opening and
causing the scanner to fall.
21
Using an Auxiliary Power Supply
Since this scanner is bus-powered, scanning can be performed with a
single USB cable. However, scanning can be performed at a higher
speed if you use the power supply USB cable or an AC adapter (sold
separately).
Connect the power supply USB cable or AC adapter (sold separately)
to the power connector at the rear of the scanner.
Power supply USB cable
To the USB
Connector of the
Computer
AC adapter (sold separately)
To power outlet
22
Documents
Types of Document You Can Scan
The scanner can scan documents that satisfy the following conditions.
Type of paper: Plain paper
Width: 2.75" to 8.5" (70 mm to 216 mm)
Length: 2" to 14.02" (50.8 mm to 356 mm)
Thickness: 14 to 32 lb bond (52 g/m
(0.06 mm to 0.15 mm)
IMPORTANT
• When scanning multiple documents of different sizes at the same
time, load the documents so that they cover the entire span of the
feed rollers.
• When a document exceeds the length of A4/LTR, we recommend
feeding one page at a time.
• Scanning documents before the ink on them is dry will make the
rollers and scanning glass dirty, causing streaks to appear on the
image and other documents to become dirty. Make sure that
documents are dry before scanning.
• Scanning documents that are written in pencil or a similar writing
instrument will make the rollers and scanning glass dirty, causing
streaks to appear on the image and other documents to become
dirty. Always clean the internal parts of the scanner after scanning
such documents.
• When scanning a two-sided document printed on thin paper, the
image on the opposite side of each page may show through. Adjust
the scanning intensity in the application software before scanning
the document.
• We recommend feeding thin paper one page at a time.
2
to 128 g/m2) 0.0024" to 0.0059"
• Scanning the following documents may cause a paper jam or
malfunction. To scan such a document, use a copy machine to
make a photocopy of the document and then scan the photocopy.
There are creases
or fold lines.
There are curls. The surface is coated.
There are tears. Extremely thin document,
There are clips or
staples.
Carbon paper
such as semi-transparent thin
paper
Documents with binder holes
(Excluding documents with 2,
3, or 4 holes of a diameter of
0.315" (8 mm) or less)
23
Loading...