Canon EF 16-35mm f/2 8L USM User Manual

EF16-35mm f/2.8L II USM

Instruction

ENG

COPY

ENG-1

Features

1. Aspherical and UD lens elements result in
outstanding image delineation.

2. Ultrasonic motor (USM) for quick and quiet
autofocusing.

3. Manual focusing is available after the subject
comes into focus in autofocus mode (ONE
SHOT AF).

4. A truly round aperture hole results in a nicer
background blur.

5. Tight seal structure ensures excellent dust­proof and drip-proof performance.

• Since the front element of this lens moves when

zooming, you need to attach a Canon PROTECT
filter sold separately for adequate dust-and
water-resistant performance.Without a filter, the
lens is not dust or water resistant.

Conventions used in this instruction

Warning to prevent lens or camera malfunction
or damage.

Supplementary notes on using the lens and
taking pictures.

Thank you for purchasing a Canon product.

The Canon EF16-35mm f/2.8L II USM lens is a
high-performance, ultra-wide-angle zoom lens for
use with Canon EOS cameras.

"USM" stands for Ultrasonic Motor.

COPY

ENG-2

a Safety Precautions

a Safety Precautions

• Do not look at the sun or a bright light source
through the lens or camera. Doing so could result

in loss of vision. Looking at the sun directly through
the lens is especially hazardous.

• Whether it is attached to the camera or not, do

not leave the lens under the sun without the
lens cap attached. This is to prevent the lens from

concentrating the sun’s rays, which could cause a
fire.

Handling Cautions

• If the lens is taken from a cold environment into
a warm one, condensation may develop on the
lens surface and internal parts. To prevent

condensation in this case, first put the lens into an
airtight plastic bag before taking it from a cold to
warm environment.Then take out the lens after it
has warmed gradually. Do the same when taking
the lens from a warm environment into a cold one.

• Do not leave the lens in excessive heat such as in
a car in direct sunlight. High temperatures can

cause the lens to malfunction.

This device complies with Part 15 of the FCC Rules.Operation is
subject to the following two conditions:(1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Do not make any changes or modifications to the equipment
unless otherwise specified in the instructions. If such changes or
modifications should be made, you could be required to stop
operation of the equipment.
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the FCC
Rules.These limits are designed to provide reasonable protection
against harmful interference in a residential installation.This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for
help.

This Class B digital apparatus complies with Canadian ICES-003.

COPY

ENG-3

Nomenclature

Distance scale (→ 6)

Focus mode switch (→ 5)

Lens mount index (→ 4)

Contacts (→ 4)

Hood mount (→ 7)

Zoom ring (→ 5)

Filter mounting
thread (→ 7)

Focusing ring (→ 5)

For detailed information, reference page numbers are provided in parentheses (→ **).

COPY