Canon Color Bubble Jet i320 Setup Instructions

Color Bubble Jet Printer

Start Here

Easy Setup Instructions

Connect one end of a USB cable (not
included) to the computer, the other to
the printer.

IMPORTANT: BE SURE THE PRINTER

IS OFF

, or the computer will attempt
to install the printer driver before
the printer is ready.

Plug the power cord into the back of the
printer and connect the other end to a
power outlet.

Continue with Step 6
on side two.

USB Port

USB Cable

Protective cap

Remove the black ink tank (BCI-24 Black)
from its packaging and pull off the orange
protective cap.

NOTE: To avoid spilling ink, do not touch the
bottom of the tank once you have removed
the protective cap.

Insert the black ink tank into the slot on
the right. Press down until the ink tank
locks into place.

Repeat the procedure for the color ink
tank (BCI-24 Color), inserting it into the
remaining slot.

Close the front cover. Pull out the paper
rest and the output tray.

Turn the print head over, then remove
the orange protective cap.

Electrical contacts

Print head nozzles

Remove the print head from its package.

NOTE: Do not touch the electrical contacts.

Raise the gray lock lever.

Slide the print head into the holder until
it is securely seated.

Lower the gray lock lever until it locks
into place.

Serial number

Print head

holder

Packing
material

Shipping Tape

Open the front cover. Remove the packing
material from the print head holder.

Remove the shipping tape from the printer.

NOTE: The serial number is located to the right

of the print head. You will need this to register
the product.

NOTE: The “i320 Setup Software & User’s

Guide” CD-ROM contains printer drivers,
software applications and electronic manuals.

Carefully remove all items from the box.

Series

Bubble Jet Printer

Documentation

and Software Kit

Power Cord

Print Head

Ink Tanks

BCI-24 Black BCI-24 Color

1

1

2

1

5

4

3

1

2

1

2

3

4

2

2

Prepare the Printer

1

Unpack the Printer

3

Install the Print Head

4

Install the Ink Tanks

5

Connect the Printer
To Your Computer

Macintosh

Place a stack of blank paper in the
paper rest.

Before using the printer, align the print
head to ensure the best quality printing.

Start the alignment procedure.

Macintosh:

a. From the File menu in a software
application, click Page Setup.

b. Click the Utilities button.

c. Click the down-arrow to select
Test Print.

d. Click the Print Head Alignment icon.

e. Wait about 60 seconds for the

calibration sheet to print. Follow
the on-screen instructions to
complete print head alignment.

Click OK (Windows) or Close then OK
(Macintosh) when f inished.

Windows:

a. For Windows XP select Start,
Settings, then Control Panel, then

click on Printers and Other Hardware,
then Printers and Faxes.

b. Right-click the Canon i320 icon,
then click Printing Preferences.

c. Click the Maintenance tab, then
click the Print Head Alignment icon.

d. When asked to start print head
alignment, click OK.

e. Wait about 60 seconds for the
calibration sheet to print. Follow
the on-screen instructions to
complete print head alignment.

QA7-2171-V01/082002A
©2002 Canon U.S.A. Inc.

Canon is a registered trademark of Canon Inc.

All other products and brand names are registered

trademarks or trademarks of their respective owners.

Specifications subject to change without notice.

PRINTED IN THAILAND

From the Application folder, double-click
on the software to be installed. Follow the
on-screen instructions.

When the “Installation was successful”
screen displays, Restart

your computer.

TURN THE PRINTER ON. Select the Apple
menu, then Chooser.

Click on the

i320 printer icon.

Close the Chooser.

NOTE: Register your product at

www.registercanon.com to ensure product

support.

To ensure highest quality output, continue
with Step 7 Align the Print Head.

Open the printer driver folder on the
CD-ROM, then double-click the Installer
icon.

Read the License Agreement, click

Accept

to continue.

Click Install. The printer driver will load
automatically.

NOTE: Screen shots may differ depending on
the operating system used.

Turn the computer on and LEAVE THE

PRINTER OFF

. Then insert the “i320 Setup

Software & User’s Guide” CD-ROM.

IMPORTANT: Drivers included with
this printer support Mac 8.6-9.x. For
Mac OS X driver and instructions, go
to www.canontechsupport.com.

If the message “No other applications can
be running...” displays, click Continue.

When the “Installation was successful”
screen displays, click Restart.

When the driver installation is complete,
click Finish.

Register your product to ensure
product support. Follow the on-screen
instructions.

When the software menu appears, click
Install.

When the software installation is complete,
click OK, then Exit.

To ensure highest quality output, continue
with Step 7 Align the Print Head.

Turn the computer on and LEAVE THE

PRINTER OFF

.

Close all software applications, then insert
the “

i320 Setup Software & User’s Guide”

CD-ROM. The setup program should run
automatically.

NOTE: For Windows® XP or Windows 2000,
log on to Windows as an Administrator before
continuing.

IMPORTANT: If you see the Found
New Hardware Wizard, click Cancel.

When the main menu appears, click
Install.

Read the License Agreement, then click

Yes to continue.

NOTE: If the CD-ROM does not run automatically,

double-click My computer, then double-click the
CD-ROM icon.

When the Printer Port window appears,
TURN THE PRINTER ON. The software will
begin identifying the printer port being
used.

IMPORTANT: If your computer can
not detect a printer port, refer to the
Troubleshooting chapt

er in the i320

Quick Start Guide for instructions.

1

8

2

3

4

9

10

5

6

7

5

6

1

2

3

4

7

9

10

11

12

8

1

2

3

Windows

6

Install the Printer Driver (Windows®)

6

Install the Printer Driver (Macintosh®)

7

Align the Print Head