Canon CAPTUREPERFECT 3.1 User Manual

PUB. CE-IE-770-01

Operation Guide

ENGLISH

Preface

Thank you for purchasing a Canon Document Scanner.

CapturePerfect 3.1 is an ISIS-compatible application program that enables the computer to acquire

images from the Canon Document Scanner. To fully understand the CapturePerfect 3.1 functions and to

be able to use them effectively, please read this guide and the ISIS/TWAIN Driver Help guide as well as

your scanner's operating manual.

About Trademarks

•ISISTM and MultiStreamTM are trademarks of EMC Corporation.

• Microsoft, Windows, SharePoint, PowerPoint, and Windows Live are registered trademarks of Microsoft Corporation in the United States and are trademarks or registered trademarks of Microsoft Corporation in other countries.

• Product names mentioned herein are for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

• TM and ® are not set forth in this manual.

Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that (i) the above copyright notices and this permission notice appear in all copies of the software and related documentation, and (ii) the names of Sam Leffler and Silicon Graphics may not be used in any advertising or publicity relating to the software without the specific, prior written permission of Sam Leffler and Silicon Graphics.

THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, EXPRESS,

IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL,

INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES

WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT

ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT

OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

• libjpeg Portions of this software are based in part on the work of the Independent JPEG Group.

Reproduction Warning

• Reproduction of documents such as the following is illegal and subject to penalty: paper currency and other legal tender, valuable instruments and passports issued by a government, as well as licenses, certificates, permits, official documents, and private records issued by a public or private entity.

• Reproduction of copyrighted materials, such as documentation, pictures, imprints, maps, and illustrations, for purposes other than personal use is prohibited.

Disclaimer

• Reproduction of the contents of this guide, in part or in whole, without prior permission is prohibited.

• This guide is subject to change without notice.

• Every effort has been made to ensure the accuracy of the information in this guide. However, Canon Electronics Inc. and its subsidiaries assume no responsibility for any errors or their consequences.

Preface..................................................................................................................... 2

Before Using ........................................................................................................... 5

Scanning Methods................................................................................................ 46

About the CapturePerfect Window......................................................................................6

Scanner Selection and Settings........................................................................................15

About Saving Image Files .................................................................................................16

About File Naming.............................................................................................................25

About MultiStream Functions ............................................................................................30

About OCR Functions .......................................................................................................33

About Log Files .................................................................................................................36

About Barcode/OCR Modification .....................................................................................38

About Other Functions ......................................................................................................39

Scan Page.........................................................................................................................47

Scan Batch to File (Saves scanned images to a specified file).........................................48

Scan Batch to Printer (Prints scanned images) ................................................................51

Scan Batch to Mail (Attaches scanned images to email) .................................................. 53

Scan Batch to SharePoint (Sends scanned images to SharePoint server) ......................56

Scan Batch to Presentation (Displays scanned images full-screen).................................59

Job (Scan According to a Previously Registered Job) ......................................................62

Scanned Image Operations ................................................................................. 66

Displaying the Thumbnail Window ....................................................................................67

Split View ..........................................................................................................................68

Saving an Image ...............................................................................................................70

Opening an Image File......................................................................................................72

Printing an Image..............................................................................................................74

Adjusting Brightness of the Displayed Image....................................................................76

Inserting/Adding Pages to an Image File ..........................................................................77

Replacing a Page in an Image File ...................................................................................80

Setting PDF File Security Options.....................................................................................83

Index ...................................................................................................................... 85

Before Using

Please read the following descriptions before using CapturePerfect.

• About the CapturePerfect Window (→P. 6) : Describes the menus in the CapturePerfect window.

• Scanner Selection and Settings

• About Saving Image Files

• About File Naming CapturePerfect.

• About MultiStream Functions

• About OCR Functions

• About Log Files detection function or OCR function.

• About Barcode/OCR Modification barcode and OCR recognition results are saved.

• About Other Functions warning settings for folders specified as save destinations.

(→P. 25) : Describes the requirements of file names for files to be saved by

(→P. 33) : Describes the OCR functions.

(→P. 36) : Describes how to save recognition results to a log file when using the barcode

(→P. 39) : Describes saving rotated images, saving split pages and capacity

Important

• Confirm that your scanner is properly connected to the computer. Refer to your scanner's operating manual for details.

• Before using CapturePerfect, install the ISIS/TWAIN driver for the scanner. Refer to your scanner's operating manual for ISIS/TWAIN driver installation.

(→P. 15) : Describes scanner selection and setup procedures.

(→P. 16) : Describes the file types that can be saved by CapturePerfect.

(→P. 30) : Describes the MultiStream output functions.

(→P. 38) : Describes how to verify and edit the log files in which

About the CapturePerfect Window

The following window appears when CapturePerfect launches. The items in the window's menu and status

bar are described here.

File menu Scan menu Edit menu View menu Page menu Help menu Status Bar

File menu

File menu Scan menu Edit menu View menu Page menu Help menu Status Bar

Open

Opens saved image files. The following file types saved by CapturePerfect can be opened: TIFF (*.tif),

JPEG (*.jpg), BMP (*.bmp) and PDF (*.pdf) files. Opening an Image File (→P. 72)

Save

This procedure saves open image files.

Note

If security is enabled for a PDF file, you are required to enter a password to open the file. Setting PDF

File Security Options (→P. 83)

Save As

This procedure saves open image files with a specified name. Saving an Image (→P. 70)

Closes the open image file.

Close All the Files

Closes all open image files.

Image Info...

Displays information about the open image file.

Prints the image displayed in the window. Printing an Image (→P. 74)

Print Format

Selects an image size for printing from the submenu.

•Actual Size Regardless of the printing paper size or scan resolution, the image prints at the same size as the original document.

• Fit to Paper Reduces or enlarges images so they fit the size of the paper, and then prints.

• Actual Pixel The image is printed so that one image pixel corresponds to one printer pixel. So the size of the printed image is smaller when printing to a high resolution printer with small dots.

Printer Setting

Configure printer settings for printing images.

Exit

Exits CapturePerfect.

Scan menu

File menu Scan menu Edit menu View menu Page menu Help menu Status Bar

Select Scanner

Selects the scanner to be used. Scanner Selection (→P. 15)

Scanner Setting or button

Sets up the scanner. Scanner Settings (→P. 15)

Scan Page

Scans and displays a single document page. Scan Page (→P. 47)

Scan Batch to File or button

Continuously scans multiple pages of a document and simultaneously saves the page images to a file or

files. Scan Batch to File (Saves scanned images to a specified file) (→P. 48)

Scan Batch to Printer

Prints the images as documents are scanned. Select whether or not to save scanned images when

Scan Batch to Printer finishes. Scan Batch to Printer (Prints scanned images) (→P. 51)

Scan Batch to Mail or button

Attaches scanned images to an email. Select whether or not to save scanned images when Scan Batch

to Mail finishes. Scan Batch to Mail (Attaches scanned images to email) (→P. 53)

Scan Batch to SharePoint

Sends scanned images to a SharePoint server. Select whether or not to save scanned images when

Scan Batch to SharePoint finishes. Scan Batch to SharePoint (Sends scanned images to SharePoint

server) (→P. 56)

Scan Batch To Presentation

CapturePerfect switches to full-screen display before scanning. Select whether or not to save scanned

images when Scan Batch To Presentation finishes. Scan Batch to Presentation (Displays scanned

images full-screen) (→P. 59)

Note

In an environment with a projector connected to the computer, such as a presentation meeting, paper

documents can be scanned and instantly projected onto the screen for description.

Select Job or button

Select a job title from in the tool bar (the Job list box) and click to execute

the job. You can select the job title by selecting Create/Delete Job in the Scan menu. Job (Scan

According to a Previously Registered Job) (→P. 62)

Create/Delete Job

You can create, edit, or delete the job. Job (Scan According to a Previously Registered Job) (→P. 62)

Cancel Scan

Interrupts the current scanning operation.

Edit menu

File menu Scan menu Edit menu View menu Page menu Help menu Status Bar

Undo

After performing a page operation (delete, insert/add or replace), undoes the change to revert to the

previous state.

Redo

Executes the operation that was last undone.

Brightness

Displays the Brightness dialog box for adjusting brightness and contrast of the displayed image.

Adjusting Brightness of the Displayed Image (→P. 76)

Rotate Left or button

Rotates the page image(s) specified in the submenu counterclockwise.

Rotate Right or button

Rotates the page image(s) specified in the submenu clockwise.

Copy

Copies the images selected by Select All or in the area specified by Pointer - Select the rectangle to the

clipboard.

Images copied to the clipboard can be pasted into other applications.

Select All

Selects all parts of the displayed image.

Pointer

Changes the pointer setting from the submenu when selecting a part of the displayed image area.

• Hand The cursor changes to a hand shape when moving it over an image displayed in the image window. When the image is magnified, the displayed area of the image can be moved by dragging.

• Select the rectangle The cursor changes to a crosshair when moving it over an image displayed in the image window. By dragging the crosshair cursor diagonally, the area dragged over is selected.

Password Settings

These settings determine password security when opening PDF files. Setting PDF File Security Options

(→P. 83)

Delete Password

When a PDF file with password security has been opened, this allows removing the security settings.

Canceling Security (→P. 84)

Modify Barcode/OCR

Activated when an image file is open, this option displays the Modify Barcode/OCR dialog box for

modifying the barcode or OCR recognition results. About Barcode/OCR Modification (→P. 38)

View menu

File menu Scan menu Edit menu View menu Page menu Help menu Status Bar

Toolbar

Switches display of the toolbar on and off.

Statusbar

Switches the Status Bar (→P. 14) on and off.

Zoom In or button

Magnifies the view of the image.

Each time you select Zoom In in the View menu or click the Zoom In button, the view of the image is

magnified (Maximum 400%).

Zoom Out or button

Reduces the view of the image.

Each time you select Zoom Out in the View menu or click the Zoom Out button, the view of the image is

reduced (Minimum 10%).

Best Fit or button

Resizes the view of an image so that it all fits in the current window.

Fit to Width or button

Resizes the view of an image so that its width fits the current window.

One To One

Displays each image pixel as one pixel on the monitor. The image's actual displayed size depends on

the monitor size and resolution.

Split View

Splits the image display window into two or four screens. Split View (→P. 68)

Thumbnail

By opening the thumbnail window, open images can be viewed at reduced (thumbnail) size. Displaying

the Thumbnail Window (→P. 67)

Full Screen

Displays the open image on the full screen. With full screen display, the display status can be changed

from the submenu displayed by the right mouse button. Scan Batch to Presentation (Displays scanned

images full-screen) (→P. 59)

Page menu

File menu Scan menu Edit menu View menu Page menu Help menu Status Bar

Next page or button

Displays the image of the next page.

Prev. page or button

Displays the image of the previous page.

Last page

Displays the image of the last page.

First page

Displays the image of the first page.

Goto page

Displays the image on a specified page.

Delete Page

Deletes the open page.

Insert/Add pages

Inserts or adds a page to the open image file.

Added pages are read from the scanner or selected from existing files. Inserting/Adding Pages to an

Image File (→P. 77)

Replace Page

Replaces a page in the open image file.

Replacement pages are read from the scanner or selected from existing files. Replacing a Page in an

Image File (→P. 80)

Help menu

File menu Scan menu Edit menu View menu Page menu Help Status Bar

About

Shows CapturePerfect version information.

Help or button

Shows this Help for CapturePerfect.

Initialize

Selecting OK initializes all of setting values of CapturePerfect.

If you select OK with the Job can be initialized check box selected, all jobs except factory preset ones

are initialized.

Status Bar

File menu Scan menu Edit menu View menu Page menu Help menu Status Bar

The image's display zoom (%), page number and scanner settings (mode, resolution and paper size) are

displayed on the Status bar.

Note

When CapturePerfect starts, the Status bar is displayed as "---".

Scanner Selection and Settings

Scanner Selection

Before using CapturePerfect, follow the procedure below to select a scanner to use with it. The selected

scanner setting is retained until another scanner is selected.

Important

Verify that your scanner is properly connected to the computer, and that the scanner and computer are both

turned on. Refer to your scanner's operating manual for details.

1 Click Select Scanner in the Scan menu.

The Select Scanner dialog box appears.

Note

If the name of the scanner does not appear in the dialog box, install the ISIS/TWAIN driver for the

scanner.

2 Select the scanner to be used, and click the OK button.

The Select Scanner dialog box closes and scanner selection is complete.

Scanner Settings

Before scanning a document, set up the scan settings. Settings remain in effect until changed.

1 Click Scanner Setting in the Scan menu, or click the button.

The scanner setting dialog box appears.

Note

• The settings dialog box displayed depends on your scanner model.

• Scanner settings can be made in the settings dialog box while scanning. Scanning Methods

• In case of using the Long Document mode, some functions may be restricted.

2 Make the appropriate settings for your scanning conditions.

For help related to these settings, click the Help button in the dialog box to refer to the driver help.

(→P. 46)

3 Click the OK button to exit the settings dialog.

About Saving Image Files

Image file types, file name requirements and multi-page files that can be saved with CapturePerfect are

described here.

About File Types

Images scanned with CapturePerfect can be saved as TIFF (*.tif), BMP (*.bmp), JPEG (*.jpg), PDF (*.pdf),

or PowerPoint (* .pptx) files. However, please note that the JPEG file type can be selected only when the

specified scanning mode is 256-level Gray, 24-bit Color, or Detect Color or Binary Image.

Scanning Mode File types that can be saved

TIFF BMP PDF JPEG PowerPoint

Black and White Yes Yes Yes No No Error Diffusion Yes Yes Yes No No Text Enhanced Yes Yes Yes No No Advanced Text Enhancement Yes Yes Yes No No Advanced Text Enhancement II Yes Yes Yes No No High Speed Text Enhancement Yes Yes Yes No No 256-level Gray Yes Yes Yes Yes Yes 24-bit Color Yes Yes Yes Yes Yes Detect Color or Binary Image Yes Yes Yes Yes No

Note

• The available scanning modes will differ depending on the scanner.

• When the file type is JPEG File (*.jpg), the image quality set by the Details of File Settings is applied. Refer to Setting JPEG Compression

• When JPEG File (*.jpg) is selected as the file type with Detect Color or Binary Image as the scanning mode, black and white images are saved as TIFF files using CCITT Group 4 compression, regardless of the current TIFF file compression settings in the Options menu. Color images are saved as JPEG files using the image quality settings by the Details of File Settings.

• When the file type is PDF File (*.pdf), the compression ratio set by the Details of File Settings is applied. Refer to Setting PDF File Saving Options

(→P. 21) for details.

(→P. 19) for details.

File Type Settings

The following file-type-dependent settings are available. Settings are made by selecting the file type from

the Details of File Settings.

Setting TIFF File Compression Options

When TIFF file (*.tif) is selected for the file type in Save As dialog box, the compression format specified

here is applied.

1 Select TIFF tab in the Details of File Settings.

Note

Details of File Settings appears in the following screens.

• Scan Batch to File dialog box (

• Scan Batch to Mail dialog box (→P. 53)

• Scan Batch to SharePoint dialog box (→P. 56)

• Insert/Add the pages from the scanner dialog box (→P. 77)

• Replace the page from the scanner dialog box (→P. 80)

→P. 48)

2 Make the following settings:

• Compression Select the compression format from the list box. CCITT Group 4 can be selected when the image type is black and white, and OLD JPEG(6) or JPEG(7) can be selected when the image type is grayscale or color. If compression is set to None, saved files may be quite large.

Note

• CCITT Group 4 This compression format is used by faxes and other such devices for data transmission, and is used to compress black and white images.

• OLD JPEG(6) and JPEG(7) These compression formats are for saving grayscale and color images. When OLD JPEG(6) or JPEG(7) is selected, the value set in the JPEG compression dialog box is applied.

Important

• OLD JPEG(6) is the JPEG format supported by Image Viewer that was bundled with Windows prior to Windows 2000, and is no longer supported by the Windows Image and Fax Viewer bundled with Windows XP.

• JPEG(7) is not supported by Image Viewer that was bundled with Windows prior to Windows 2000.

• The compression format supported by CapturePerfect may not be supported by other applications. If a TIFF file saved by CapturePerfect cannot be opened by another application, set the compression to None and save it again.

• JPEG compression Select the image quality to be applied when OLD JPEG(6) or JPEG(7) is selected under the Compression settings. Setting JPEG Compression (→P. 21)

3 Click the OK button.

The Details of File Settings dialog box closes.

Setting PDF File Saving Options

When saving scanned images as PDF (*.pdf) files, set the compression and OCR object language saving

options.

1 Select PDF tab in the Details of File Settings.

Note

Details of File Settings appears in the following screens.

• Scan Batch to File dialog box (

• Scan Batch to Mail dialog box (→P. 53)

• Scan Batch to SharePoint dialog box (→P. 56)

• Insert/Add the pages from the scanner dialog box (→P. 77)

• Replace the page from the scanner dialog box (→P. 80)

→P. 48)

2 Make the following settings:

• Create PDF/A file When this check box is selected, PDF/A file is created. Mode is fixed to Standard. If Japanese, Japanese and English, Simplified Chinese or Traditional Chinese is selected for Language for OCR, you cannot create a PDF/A file.

•Mode Select the PDF file compression ratio.

– High Compression

Files are saved with high compression. Image quality is degraded, but the file size is smaller.

– Standard

Files are saved with standard compression.

– Character Precedence

To prevent character legibility from degrading, only non-character areas are compressed when files are saved.

Note

The Mode setting is only valid when the specified scanning mode is 256-level Gray or 24-bit Color, or

when a color document is detected with Detect Color or Binary Image as the scanning mode. If the

scanning mode is a two-color mode such as Black and White, or Error Diffusion, the size of the file

depends on the size of the document.

• Apply OCR Select this check box to cause printed characters in the image to be recognized and saved as text data attached to the recognized area.

• Language for OCR When the Apply OCR check box is selected, you can select from the list box the language of the text to be scanned.

• Detect outlined character This setting is enabled only when the Apply OCR check box is selected. When this check box is selected, outlines letters in the image can be recognized for the language assigned in Language for OCR.

Note

– For PDF files (*.pdf) with attached OCR information, document character strings scanned as

images are recognized as text and saved as text data.

– When the Apply OCR check box is selected, deskewing is performed regardless of the scanner

driver's Deskew setting. If you scan sizes smaller than the set scan size or you set the TWAIN driver Margin to a large value, the image is moved to the upper-left corner.

– Depending on documents, some images may be truncated if the Apply OCR box is selected. If this

happens clear the Apply OCR check box.

– In case of using the Long Document mode etc., OCR recognition results may not be applied.

• Hi-speed transfer Hi-speed transfer can be enabled if your scanner supports JPEG transfers. This option may not be displayed or available depending on the scanner you select. When the scanning mode specified during scanner setup is 256-level Gray or 24-bit Color, this feature applies JPEG compression to images transferred from the scanner to the computer.

• JPEG compression Selects the image quality when Hi-speed transfer is selected. Setting JPEG Compression

3 Click the OK button.

The Details of File Settings dialog box closes.

(→P. 21)

Setting JPEG Compression

Select the image quality to be applied when saving scanned images as JPEG files, when Hi-speed transfer

is enabled under the PDF file settings, or when OLD JPEG(6) or JPEG(7) is selected under the TIFF file

settings. The selected image quality will determine the file size. The setting here interlocks with the scanner

setting.

1 Select JPEG tab in the Details of File Settings.

Note

Details of File Settings appears in the following screens.

• Scan Batch to File dialog box (

• Scan Batch to Mail dialog box (→P. 53)

• Scan Batch to SharePoint dialog box (→P. 56)

• Insert/Add the pages from the scanner dialog box (→P. 77)

• Replace the page from the scanner dialog box (→P. 80)

→P. 48)

2 Make the following settings:

Quality

Select the quality of files to be saved from the following choices. The slider position changes when an

item is selected from the list box.

Quality Setting Slider Value Image Quality File Size

High Quality 90 (Auto) High Large Standard 75 (Auto) Standard Standard High Compression 10 (Auto) Low Small User Manual setting See Note See Note

Note

When High Quality is selected, the quality of saved images has priority, but files are large. When High

Compression is selected, the size of saved image has priority, but image quality is poorer.

3 Click the OK button.

The Details of File Settings dialog box closes.

Setting PowerPoint File Saving Options

When saving scanned images as PowerPoint (*.pptx) files, set the OCR object language and file format for

image backup.

Note

• Only when the scanning resolution is set to 300 dpi, you can save the image as PowerPoint file.

• You can select up to A4 for paper size of PowerPoint file. However, if Match original size is selected for paper size of the scanner settings, error may be occur even if the document is A4 size.

• If the scanner is set to any scanning mode other than 24-bit Color or 256-level Gray, you cannot save scanned images in PowerPoint format.

1 Select POWERPOINT tab in the Details of File Settings.

Note

Details of File Settings appears in the following screens.

• Scan Batch to File dialog box (

• Scan Batch to Mail dialog box (→P. 53)

• Scan Batch to SharePoint dialog box (→P. 56)

→P. 48)

• Insert/Add the pages from the scanner dialog box (→P. 77)

• Replace the page from the scanner dialog box (→P. 80)

2 Make the following settings:

• Apply OCR Select this check box to cause printed characters in the image to be recognized and saved as text data attached to the recognized area.

• Language for OCR When the Apply OCR check box is selected, you can select from the list box the language of the text to be scanned.

Note

– For PowerPoint files (*.pptx) with attached OCR information, document character strings scanned

as images are recognized as text and saved as text data.

– When the Apply OCR check box is selected, deskewing is performed regardless of the scanner

driver's Deskew setting. If you scan sizes smaller than the set scan size or you set the TWAIN driver Margin to a large value, the image is moved to the upper-left corner.

– Depending on documents, some images may be truncated if the Apply OCR box is selected. If this

happens clear the Apply OCR check box.

• Back up image When selected, creates the backup image file in addition to the PowerPoint file.

• File Type When Back up image is selected, selects the type of backup image file (TIFF, BMP, PDF, JPEG). However, JPEG is available when the Image Format is set to 256-level Gray or 24-bit Color. If both of the following conditions are satisfied, the error message is displayed during scanning.

– BMP or JPEG is specified for back up image

– Multi Page (All Pages) or Multi Page (Specified Pages) is selected for MultiPage Settings.

3 Click the OK button.

The Details of File Settings dialog box closes.

About Multi-Page Files

When scanning with Scan Batch to File (→P. 48) , Scan Batch to Mail (→P. 53) , or Scan Batch to

SharePoint (→P. 56) and when performing Save Open Image (→P. 70) , the Multi Page function can be

used to save multiple images to one TIFF or PDF file.

MultiPage Settings

MultiPage settings are made from a settings dialog box when Scan Batch to File (→P. 48) , Scan Batch to

Mail (→P. 53) , or Scan Batch to SharePoint (→P. 56) is selected for scanning.

Available MultiPage settings are determined by the file type (BMP, JPEG, TIFF, PDF or PowerPoint)

selected in the scan settings dialog box.

When BMP or JPEG is Selected

Only Single Page is available in the list box, and one image is saved per file. Besides, scanning information

can be included in the specified File Name by enabling Use Schema. About Schema (→P. 25)

When TIFF, PDF, or PowerPoint is Selected

• Single Page Multiple scanned page images are saved as one image per file.

• Multi Page (All Pages) All scanned page images are saved as one multi-page file.

• Multi Page (Specified Pages) Page Number is enabled, and multiple scanned page images are saved to multiple multi-page files, each with the specified number of pages.

When Multi Page (All Pages) or Multi Page (Specified Pages) is displayed in the list box, multiple page

images can be saved in one file.

Note

When Multi Page (Specified Pages) is selected, page images are saved to multiple multi-page files, divided

according to the number of pages specified in the Page Number field. Also, the batch separation type

specified in the Scan Batch to File (→P. 48) dialog box is changed to None.

About File Naming

Requirements and limitations of file names assigned to images scanned and saved by CapturePerfect are

described here.

About File Name Settings

After selecting the TIFF, PDF, or PowerPoint file type and specifying Multi Page (All Pages) or Multi Page

(Specified Pages) as the MultiPage Settings, multiple page images are saved in one file. About Multi-Page

Files (→P. 23)

About Schema

These settings are always applied to file/folder names saved when Single Page is selected as the

MultiPage Settings (→P. 24) . If no Schema settings have been made, a serial number consisting of four

digits (by default) is added to the specified file name. Example: docs0001.tif

File Name Settings

Selecting the check boxes in the Schema dialog box causes the checked information to be automatically

added to the names of files to be saved.

• The example file name reflects the effects selected by the check boxes.

• When Schema settings are performed with MultiStream settings, "Prim", "Seco", or “Tert” is added to the specified file name.

The character strings to be added are as follows for each selected item:

• The Counter check mark cannot be cleared unless one of the following is selected: Barcode, Imprinter/ Addon, OCR, or Date.

• The Barcode, Imprinter/Addon and OCR check boxes cannot be selected at the same time.

• Barcode is valid when supported by the scanner, and when the Barcode Search scanner setting is enabled. Up to four recognized barcode results can be added. However, the total number of characters added cannot exceed 64.

• Selecting the OCR check box enables OCR recognition and adds the first 64 recognized characters to the file name.

• If you use the value for Barcode or OCR, you can specify the way to add detected character strings to the file name from the list box.

– Use detected string

Uses the detected strings as the file name. Invalid letters for file name are displayed in underscores.

– Use detected string of the back image if not detected

When no strings are detected, uses the strings detected in previous image. If there is no detected strings in the first image, no strings are added.

+ 59 hidden pages

Canon CAPTUREPERFECT 3.1 User Manual

Preface

Contents

Before Using

About the CapturePerfect Window

Scanner Selection and Settings

About Saving Image Files

About File Naming