Canon 5704B001 User Manual

Camera User Guide
• Make sure you read this guide, including the “Safety Precautions” section, before using the camera.
• Reading this guide will help you learn to use the camera properly.
• Store this guide safely so that you can use it in the future.
ENGLISH
Checking the Package Contents
Check if the following items are included in your camera package. If anything is missing, contact the retailer where you purchased the camera.
Camera Battery Pack NB-6L
Interface Cable
IFC-400PCU
Getting Started
(with Terminal Cover)
Stereo AV Cable
AVC-DC400ST
DIGITAL CAMERA
Solution Disk
Battery Charger
CB-2LY/CB-2LYE
Wrist Strap
WS-DC10
Warranty
Card
Using the PDF Manuals
The following PDF manuals are included in the Readme folder of the CD-ROM: When the software is installed on your computer, the PDF manuals will be copied to the computer and you can refer to them by clicking the shortcuts on the desktop.
Camera User Guide (This Guide)
Once you have mastered the basics, use the camera’s many features to shoot more challenging photos.
Software Guide
Read when you want to use the included software.
A memory card is not included.
Adobe Reader is required to view the PDF manuals.
2
Read This First
Test Shots and Disclaimer
Take some initial test shots and play them back to make sure the images were recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that results in the failure of an image to be recorded or to be recorded in a way that is machine readable.
Warning Against Copyright Infringement
The images recorded with this camera are intended for personal use. Do not record images that infringe upon copyright laws without the prior permission of the copyright holder. Please be advised that in certain cases the copying of images from performances, exhibitions, or commercial properties by means of a camera or other device may contravene copyright or other legal rights even if the image was shot for personal use.
Warranty Limitations
This camera’s warranty is only effective in the country of sale. If there is a problem with the camera while abroad, please return it to the country of sale before proceeding with a warranty claim to a Canon Customer Support Help Desk. For Canon Customer Support contacts, please see the customer support list supplied with your camera.
LCD Monitor (Screen)
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification, but occasionally non-performing pixels may appear as bright or dark dots. This is not a malfunction and has no effect on the recorded image.
The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If so, remove the film before using the camera.
Camera Body Temperature
Please take care when operating the camera for an extended period as the camera body may become warm. This is not a malfunction.
3
What Do You Want to Do?
Shoot
z Shoot, leaving it to the camera to make settings .........................25
Take good people shots
4
I
Portraits
(p. 64)
Shoot various other scenes
Night Scene
(p. 65)
Shoot with special effects
Fish-eye Effect
(p. 69)
V
Kids and pets
(p. 65)
Low Light
Facial expressions
(p. 65)
(p. 81)
Miniature Effect
(p. 70)
w
At the beach
(p. 65)
O t
Foliage
(p. 65)
Toy Camera Effect
P
Against snow
(p. 66)
Fireworks
(p. 66)
(p. 75)
Creative Light Effect
(p. 71)
z
Focus on faces
z Shoot in places where I cannot use the flash
(turn off the flash) ......................................................................... 54
z Take pictures with me in them too (self-timer) .................58, 59, 78
z Insert the date and time into my shots .........................................57
z Take a picture while shooting a movie ......................................... 67
Monochrome
(p. 74)
..................................................................25, 64, 95
Super vivid colors
(p. 68)
Poster Effect
(p. 68)
4
What Do You Want to Do?
E
View
z Look at my pictures...................................................................... 28
z Automatically play back pictures (slideshow).............................124
z Look at my pictures on a TV ......................................................133
z Look at my pictures on a computer. ............................................. 34
z Quickly search pictures .............................................................. 120
z Erase pictures ......................................................................30, 139
Shoot/View Movies
z Shoot movies .......................................................................31, 111
z View movies ................................................................................. 33
z Shoot fast moving subjects and play them back
in slow motion ............................................................................114
Print
z Easily print pictures .................................................................... 152
1
2
Save
z Save images to a computer .........................................................34
Other
z Turn off sounds ............................................................................49
z Use the camera abroad........................................................16, 169
z Understand what is displayed on the screen .............................187
3
5
Table of Contents
Chapters 1 – 3 explain the basic operations and frequently used functions of this camera. Chapters 4 onward explain the advanced functions, letting you learn more as you read each chapter.
Checking the Package Contents .......2
Read This First ..................................3
What Do You Want to Do? ................4
Table of Contents ..............................6
Conventions Used in This Guide .......9
Safety Precautions...........................10
1 Getting Started................... 13
Using the Touch Panel ....................14
Charging the Battery ........................15
Compatible Memory Cards
(Sold Separately) ...........................17
Inserting the Battery and
Memory Card .................................17
Setting the Date and Time ...............20
Setting the Display Language..........22
Formatting Memory Cards ...............23
Pressing the Shutter Button .............24
Taking Pictures (Smart Auto)...........25
Viewing Images ...............................28
Active Display ..................................29
Erasing Images ................................30
Shooting Movies ..............................31
Viewing Movies ................................33
Transferring Images
to a Computer for Viewing .............34
Accessories .....................................38
Separately Sold Accessories ...........39
2 Learning More.................... 41
Components Guide..........................42
Screen Display.................................44
Indicator ...........................................45
FUNC. Menu – Basic Operations.... 46
MENU – Basic Operations .............. 47
Changing the Sound Settings ......... 49
Adjusting the Screen Brightness..... 50
Returning the Camera to Default
Settings ......................................... 51
Power Saving Function
(Auto Power Down) ....................... 52
3 Shooting with Commonly
Used Functions ..................53
Turning the Flash Off ...................... 54
Zooming in More Closely on
Subjects (Digital Zoom)................. 55
Inserting the Date and Time ............ 57
Using the Self-Timer ....................... 58
Changing the Recording Pixel
Setting (Image Size) ..................... 60
Changing the Compression Ratio
(Image Quality) ............................. 60
4 Adding Effects and Shooting
in Various Conditions........63
Shooting in Various Conditions....... 64
Making Short Movies Automatically
(Movie Digest) ............................... 67
Adding Effects and Shooting........... 68
Detecting a Face and Shooting
(Smart Shutter) ............................. 76
High-Speed Continuous Shooting
(High-speed Burst) ........................ 80
Capturing the Best Facial
Expressions (Best Image
Selection) ...................................... 81
6
Table of Contents
5 Choosing Settings
Yourself...............................83
Shooting in Program AE ................. 84
Adjusting the Brightness
(Exposure Compensation) ............ 85
Turning the Flash On ...................... 85
Adjusting the White Balance ........... 86
Changing the ISO Speed................ 88
Correcting the Brightness and
Shooting (i-Contrast)..................... 89
Changing the Aspect Ratio ............. 90
Continuous Shooting....................... 91
Changing the Tone of an Image
(My Colors) ................................... 92
Shooting Close-ups (Macro) ........... 94
Shooting Far Away Subjects
(Infinity) ......................................... 94
Changing the AF Frame Mode........ 95
Magnifying the Focal Point.............. 97
Choosing the Subject to
Focus On (Touch AF) ................... 98
Shooting with the AF Lock .............. 99
Shooting with Servo AF ................ 100
Changing the Metering Method..... 101
Shooting with the AE Lock............ 102
Shooting with the FE Lock ............ 102
Shooting with Slow Synchro ......... 103
Red-Eye Correction ...................... 104
Checking for Shut Eyes ................ 105
6 Getting More Out of Your
Camera..............................107
Setting the Shutter Speed ............. 108
Setting the Aperture Value ............ 109
7 Using Various Functions for
Shooting Movies.............. 111
Shooting Various Kinds of
Movies......................................... 112
Shoot Movies That Look Like a
Miniature Model (Miniature
Effect).......................................... 113
Shooting Super Slow Motion
Movies......................................... 114
Changing the Image Quality.......... 116
Other Shooting Functions.............. 117
Editing ........................................... 117
8 Using Various Playback and
Editing Functions ............ 119
Quickly Searching Images............. 120
Viewing Images in Filtered
Playback...................................... 123
Viewing Slideshows....................... 124
Checking the Focus....................... 126
Magnifying Images ........................ 127
Viewing Each Image in a Group....128
Displaying Various Images
(Smart Shuffle) ............................ 130
Changing Image Transitions .........131
Easy Operations with Touch
Actions ........................................ 131
Viewing Images on a TV ...............133
Protecting Images ......................... 137
Erasing All Images ........................139
Tagging Images as Favorites........141
Organizing Images by Category
(My Category) .............................143
Rotating Images ............................144
Resizing Images............................ 145
Trimming ....................................... 146
7
Table of Contents
Adding Effects with the My Colors
Function.......................................148
Correcting the Brightness
(i-Contrast)...................................149
Correcting the Red-Eye Effect.......150
9 Printing ............................. 151
Printing Images ..............................152
Choosing Images for Printing
(DPOF) ........................................159
10Customizing Camera
Settings ............................ 163
Changing Camera Settings............164
Changing Shooting Function
Settings........................................171
Changing Playback Function
Settings........................................176
11Useful Information ...........177
Using Household Power................ 178
Using an Eye-Fi Card .................... 179
Troubleshooting ............................ 181
List of Messages That Appear
on the Screen.............................. 184
Information Displayed
on the Screen.............................. 187
Handling Precautions .................... 191
Functions Available in Each
Shooting Mode............................192
Menus ........................................... 196
Playback Mode FUNC. Menu........ 200
Specifications ................................ 201
Index ............................................. 205
8
Conventions Used in This Guide
Icons are used in the text to represent the camera buttons and switches.
Language that displays on the screen appears inside [ ] (square brackets).
: Things you should be careful about
: Troubleshooting tips
: Hints for getting more out of your camera
: Supplemental information
(p. xx): Reference pages (“xx” stands for a page number)
This guide assumes all functions are at their default settings.
The various types of memory cards that can be used in this camera are
collectively referred to as memory cards in this guide.
9
Safety Precautions
Before using the product, please ensure that you read the safety precautions described
below. Always ensure that the product is used correctly.
The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
Be sure to also check the guides included with any separately sold accessories you
use.
Warning
Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash.
Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
Use only recommended power sources.
Do not attempt to disassemble, alter or apply heat to the product.
Avoid dropping or subjecting the product to severe impacts.
To avoid the risk of injury, do not touch the interior of the product if it has been
dropped or otherwise damaged.
Stop using the product immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
Do not use organic solvents such as alcohol, benzine, or thinner to clean the
equipment.
Do not let the product come into contact with water (e.g. sea water) or other
liquids.
Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire. If liquids or foreign objects come into contact with the camera interior, immediately turn the camera power off and remove the battery. If the battery charger becomes wet, unplug it from the outlet and consult your camera distributor or a Canon Customer Support Help Desk.
Use only the recommended battery.
Do not place the battery near or in direct flame.
Unplug the power cord periodically, and using a dry cloth, wipe away any dust
and dirt that has collected on the plug, the exterior of the power outlet, and the surrounding area.
Do not handle the power cord with wet hands.
Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into the outlet.
Do not allow dirt or metal objects (such as pins or keys) to contact the terminals
or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause injury and damage the surroundings. In the event that a battery leaks and the battery acid contacts eyes, mouth, skin or clothing, immediately flush with water.
Denotes the possibility of serious injury or death.
10
Safety Precautions
Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of electronic instruments and other devices. Exercise adequate caution when using the camera in places where use of electronic devices is restricted, such as inside airplanes and medical facilities.
Do not play the supplied CD-ROM(s) in any CD player that does not support data
CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the loud sounds of a CD-ROM played on a music CD player. Additionally, playing the CD-ROM(s) in an audio CD player (music player) could damage the speakers.
Caution
Be careful not to bang the camera or subject it to strong impacts or shocks when
hanging it by the strap.
Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
Avoid using, placing or storing the product in the following places:
- Places subject to strong sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery, resulting in electrical shock, fire, burns or other injuries. High temperatures may cause deformation of the camera or battery charger casing.
The slideshow transition effects may cause discomfort when viewed for
prolonged periods.
Caution
Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor.
When using the camera on a beach or at a windy location, be careful not to allow
dust or sand to enter the camera.
This may cause the product to malfunction.
In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from the flash to prevent heat build-up and damage to the unit.
Denotes the possibility of injury.
Denotes the possibility of damage to the equipment.
11
Safety Precautions
Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
Before you discard the battery, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
Unplug the battery charger from the power outlet after charging is complete, or
when you are not using it.
Do not place anything, such as cloth on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort, resulting in fire.
Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or damage.
Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
When putting the camera in your bag, ensure that hard objects do not come into
contact with the screen.
Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
12
1
Getting Started
This chapter explains preparations before shooting, how to shoot in A mode, and then how to view and erase the images you take. The
latter part of this chapter explains how to shoot and view movies and
transfer images to a computer.
Attaching the Strap/Holding the Camera
Attach the included strap and wrap it around your wrist to avoid dropping
the camera during use.
Keep your arms tight against your body while holding the camera firmly by
the sides when shooting. Be sure that your fingers do not block the flash or touch the screen.
Strap
13
Using the Touch Panel
This camera has a touch panel screen that allows you to perform operations with the touch of your finger.
Touch
Briefly touch the screen with your finger.
z Used for choosing icons or magnifying
images.
Drag
Touch and drag your finger across the screen.
z Used for playback operations such as
switching to the next image, or moving the displayed location of magnified images.
Since the camera uses a pressure sensitive touch panel, the camera may not recognize touch operations if you install a screen protector.
What if I cannot perform operations well?
When touching with your finger does not work well, you can use the toggle attached to the strap to perform operations. Only use the attached toggle to perform operations. Do not use other objects, such as pens or pencils. You can calibrate the touch panel if you are having difficulty choosing items or buttons (p. 170).
14
Charging the Battery
Use the included charger to charge the battery. Be sure to charge the battery as it is not charged at the time of purchase.
Remove the cover.
Insert the battery.
z Align the o marks on the battery and
charger, then insert the battery by sliding it in ( ) and down ( ).
Charge the battery.
z For CB-2LY: Flip out the plug ( ) and
plug the charger into a power outlet ( ).
CB-2LY
CB-2LYE
z For CB-2LYE: Plug the power cord into
the charger, then plug the other end into a power outlet.
X The charge lamp lights red and charging
starts.
X The charge lamp will light green when
charging has finished. Charging takes approx. 1 hour and 55 minutes.
Remove the battery.
z Unplug the battery charger from the power
outlet, then remove the battery by sliding it in ( ) and up ( ).
To protect the battery and prolong its life, do not charge it for longer than 24 hours continuously.
15
Charging the Battery
Number of Possible Shots
Number of Shots
The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
Under some shooting conditions, the number of shots that can be taken may be less
than mentioned above.
Playback Time
Approx. 180
Approx. 4 hours
Battery Charge Indicator
An icon or message will appear on the screen indicating the battery’s charge state.
Display Summary
Sufficient charge.
Slightly depleted, but sufficient.
(Blinking red) Nearly depleted. Charge the battery.
“Change the battery pack.” Depleted. Recharge the battery.
Using the battery and charger effectively
Charge the battery on the day, or the day before, it will be used.
Charged batteries continue to discharge naturally even if they are not used.
Attach the cover to a charged battery so that the o mark is visible.
How to store the battery for long periods:
Deplete and remove the battery from the camera. Attach the terminal cover and store the battery. Storing a battery for long periods of time (about a year) without depleting it may shorten its life span or affect its performance.
The battery charger can also be used when abroad.
The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power. If the plug does not fit the outlet, use a commercially available plug adapter. Do not use electrical transformers for foreign travel as they will cause damage.
The battery may develop a bulge.
This is a normal characteristic of the battery and does not indicate a problem. However, if the battery bulges to the point where it will no longer fit into the camera, please contact a Canon Customer Support Help Desk.
If the battery is quickly depleted even after charging, it has reached the end of
its life span. Purchase a new battery.
16
Compatible Memory Cards (Sold Separately)
The cards below can be used without restrictions on their capacities.
SD memory cards*
SDHC memory cards*
SDXC memory cards *
MultiMediaCards
MMCplus memory cards
HC MMCplus memory cards
Eye-Fi Cards
* This memory card complies with the SD standards. Some cards may not operate
properly depending on the brand of card used.
Depending on your computer’s OS version, SDXC memory cards may not be recognized even when using a commercially available card reader. Check to make sure that your OS supports SDXC memory cards beforehand.
About Eye-Fi Cards
This product is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case of an issue with an Eye-Fi card, please check with the card manufacturer. Also note that an approval is required to use Eye-Fi cards in many countries or regions. Without approval, use of the card is not permitted. If it is unclear whether the card has been approved for use in the area, please check with the card manufacturer.
Inserting the Battery and Memory Card
Insert the included battery and a memory card (sold separately).
Check the card’s write-protect tab.
z If the memory card has a write-protect tab,
you will not be able to record images if the tab is in the locked position. Slide the tab up until you hear a click.
Open the cover.
z Slide the cover ( ) and open it ( ).
17
Inserting the Battery and Memory Card
Insert the battery.
z Press the battery lock in the direction of the
arrow, then insert the battery as shown until it locks into place with a click.
z Be sure to insert the battery in the correct
direction or it will not properly lock into place.
Terminals Battery
What if [Memory card locked] appears on the screen?
SD, SDHC, SDXC memory cards, and Eye-Fi cards have a write-protect tab. If this tab is in the locked position, [Memory card locked] will appear on the screen and you will not be able to take or erase images.
18
lock
Insert the memory card.
z Insert the memory card as shown until it
locks into place with a click.
z Be sure the memory card is oriented
correctly. Inserting the memory card in the wrong direction could damage the camera.
Terminals
Close the cover.
z Close the cover ( ), and press downward
as you slide it until it clicks into place ( ).
Inserting the Battery and Memory Card
Removing the Battery and Memory Card
Remove the battery.
z Open the cover and press the battery lock
in the direction of the arrow.
X The battery will pop up.
Remove the memory card.
z Push the memory card in until you hear a
click, then slowly release it.
X The memory card will pop up.
Number of Shots per Memory Card
Memory Card
Number of Shots
Values are based on the default settings.
The number of shots that can be taken will vary depending on camera settings, the
subject and the memory card used.
Can you check the number of shots that can be taken?
You can check the number of shots that can be taken when the camera is in a Shooting mode (p. 25).
Number of shots that can be taken
4GB 16GB
Approx. 1231 Approx. 5042
19
Setting the Date and Time
The Date/Time settings screen will appear the first time the camera is turned on. Since the dates and times recorded into your images are based on these settings, be sure to set them.
Turn on the camera.
z Press the power button.
X The Date/Time screen will appear.
Set the date and time.
z Touch the option you want to set.
X op will appear.
z Touch op to set a value.
Complete the setting.
z Touch Ú.
X Once the date and time have been set, the
Date/Time screen will close.
z Pressing the power button will turn off the
camera.
Reappearing Date/Time screen
Set the correct date and time. If you have not set the date and time, the Date/Time screen will appear each time you turn on the camera.
Daylight saving time settings
If you touch in Step 2 and then choose , you will set the time to daylight saving (1 hour ahead).
20
Setting the Date and Time
Changing the Date and Time
You can change the current date and time settings.
Display the menu.
z After touching ø, touch n.
Choose [Date/Time].
z Touch the 3 tab. z Drag up or down the screen to choose
[Date/Time].
z Touch [Date/Time].
Change the date and time.
z Follow Steps 2 and 3 on p. 20 to adjust the
setting.
z Touch Ú twice to close the menu.
Date/Time battery
The camera has a built-in date/time battery (backup battery) that allows the
date/time settings to be retained for about three weeks after the battery pack has been removed.
By inserting a charged battery or connecting an AC adapter kit (sold separately,
p. 39) the date/time battery can be charged in about 4 hours even if the camera is not turned on.
If the date/time battery is depleted, the Date/Time screen will appear when you
turn the camera on. Follow the steps on p. 20 to set the date and time.
21
Setting the Display Language
You can change the language that displays on the screen.
Enter Playback mode.
z Press the 1 button.
Display the settings screen.
z Touch and hold n.
X The settings screen will appear.
Set the display language.
z Touch a display language, then touch Ú.
X Once the display language has been set,
the settings screen will close.
What if n does not appear?
When there are images on the memory card, touch ø on the lower left of the screen to display n.
You can also change the display language by touching ø, then n. Choose the 3 tab in the screen that appears, then choose the [Language] menu item.
22
Formatting Memory Cards
Before you use a new memory card or one that has been formatted in other devices, you should format the card with this camera. Formatting (initializing) a memory card erases all data on the memory card. As you cannot retrieve the erased data, exercise adequate caution before formatting the memory card. Before formatting an Eye-Fi card (p. 179), be sure to install the software contained on the card to a computer.
Display the menu.
z Touch ø, then touch n.
Choose [Format].
z Touch the 3 tab. z Drag up or down the screen to choose
[Format].
z Touch [Format].
Choose [OK].
z Touch [OK].
X A confirmation screen will appear.
Format the memory card.
z Touch [OK].
X The memory card will be formatted.
23
Pressing the Shutter Button
Complete formatting.
X When formatting ends, [Memory card
formatting complete] will appear on the screen.
z Touch [OK].
Formatting or erasing data on a memory card merely changes the file management information on the card and does not ensure its contents are completely erased. Be careful when transferring or disposing of a memory card. When disposing of a memory card, take precautions such as physically destroying the card to prevent personal information leaks.
The total capacity of the memory card displayed in the formatting screen
may be less than indicated on the memory card.
Perform a low-level format (p. 165) of the memory card when the camera
does not operate properly, the recording/reading speed of a memory card has dropped, when continuous shooting speed slows down, or when movie recording stops suddenly.
Pressing the Shutter Button
To take images that are in focus, be sure to first press the shutter button lightly (halfway) to focus, then press fully to shoot.
Press halfway (Press lightly to focus).
z Press lightly until the camera beeps twice
and AF frames appear where the camera focused.
24
Press fully (Press fully to shoot).
The camera plays the shutter sound and
X
takes the shot.
z Since the shot is being taken while the
shutter sound plays, be careful not to move the camera.
Taking Pictures (Smart Auto)
Does the length of the shutter sound change?
Since the time required to shoot differs depending on the scene you want to
take, the length of the shutter sound may change.
If the camera or subject moves while the shutter sound is playing, the recorded
image may be blurry.
If you shoot without pressing the shutter button halfway, the image may not be in focus.
Taking Pictures (Smart Auto)
Since the camera can determine the subject and shooting conditions, you can let it automatically select the best settings for the scene and just shoot. The camera can also detect and focus on faces, setting the color and brightness to optimal levels.
Turn on the camera.
z Press the power button.
X The start-up screen will appear.
Enter A mode.
z Set the mode switch to A. z When you point the camera toward the
subject, the camera will make a slight noise as it determines the scene.
X The icon for the determined scene will
appear in the upper left of the screen.
X The camera will focus on detected
subjects and display frames on them.
X Black bars will appear on the sides of the
screen. These areas will not be recorded when shooting.
25
Taking Pictures (Smart Auto)
Zoom bar
AF Frame
Compose the shot.
z Moving the zoom lever toward i
(telephoto) will zoom in on your subject, making it appear larger. Moving the lever toward j (wide angle) will zoom out from your subject, making it appear smaller. (The zoom bar showing the zoom position appears on the screen.)
Focus.
z Press the shutter button halfway to focus.
X When the camera focuses, it will beep
twice and AF frames will appear where the camera focused. Several AF frames will appear when the camera focuses on more than one point.
Shoot.
z Press the shutter button fully to shoot.
X The camera will play the shutter sound and
shoot. The flash will automatically fire in low light conditions.
X The image will appear on the screen for
approximately two seconds.
z You can take a second picture even while
an image is displayed by pressing the shutter button again.
What if...
What if the color and brightness of the images do not turn out as
expected?
The scene icon (p. 188) that appears on the screen may not match the actual scene. If this happens, try shooting in G mode (p. 83).
26
Taking Pictures (Smart Auto)
What if white and gray frames appear when you point the camera toward
a subject?
A white frame appears on the face or subject that the camera detected as the main subject, while gray frames appear on other detected faces. The frames will follow the subjects within a certain range. If the subject moves, however, the gray frames will disappear, leaving only the white frame.
What if a frame does not appear on the subject you want to shoot?
The subject may not be detected, and frames may appear on the background. If this happens, try shooting in G mode (p. 83).
What if a blue frame appears when you press the shutter button halfway?
A blue frame appears when a moving subject is detected; the focus and exposure will continuously adjust (Servo AF).
What if a flashing appears?
Attach the camera to a tripod so that the camera does not move and blur the image.
What if the image comes out dark even if the flash fired when shooting?
The subject is too far away for the flash to reach. The effective flash range is approximately 50 cm – 5.0 m (1.6 – 16 ft.) at maximum wide angle (j), and approximately 50 cm – 2.0 m (1.6 – 6.6 ft.) at maximum telephoto (i).
What if the camera beeps once when the shutter button is pressed halfway?
Your subject may be too close. When the camera is at maximum wide angle (j), move about 3 cm (1.2 in.) or more away from your subject and shoot. Move about 40 cm (1.3 ft.) or more away when the camera is at maximum telephoto (i).
What if the lamp lights when the shutter button is pressed halfway?
To reduce red-eye and to assist in focusing, the lamp may light when shooting in dark areas.
What if the h icon blinks when you try to shoot?
The flash is charging. You can shoot when recharging ends.
What if appears when the shutter button is pressed halfway?
When you press the shutter button halfway in extremely bright shooting conditions, will appear and the brightness will automatically adjust to appropriate levels.
What if an icon appears in the upper left of the screen?
The icon for the determined scene will appear in the upper left of the screen. For details on the icons that appear, see “Scene Icons” (p. 188).
27
Viewing Images
Choosing the subject to focus on (Touch AF)
After touching the subject and displaying , the focus and exposure will be maintained where the blue AF frame appears when you press the shutter button halfway (Servo AF). Press the shutter button fully to shoot.
Viewing Images
You can view the images you have taken on the screen.
Enter Playback mode.
z Press the 1 button.
X The last image you took will appear.
Choose an image.
z Dragging left to right across the screen will
cycle through the images in the reverse order they were taken, from the newest image to the oldest.
z Dragging right to left across the screen will
cycle through images in the order they were taken, from oldest to newest.
z If you touch the left edge of the screen
(inside frame on the screen at the left), q will appear and images will display in the reverse order they were taken, from the newest image to the oldest.
z If you touch the right edge of the screen
(inside frame on the screen at the left), r will appear and images will display in the order they were taken, from oldest to newest.
z The images change more quickly if you
touch and hold qr.
z The lens will retract after approximately 1
minute elapses.
28
Active Display
z Pressing the 1 button again while the
lens is retracted will turn off the power.
Switching to Shooting mode
Pressing the shutter button halfway while in Playback mode switches the camera to Shooting mode.
Active Display
When an image is displayed, lightly tapping the camera as shown below will switch to the next image.
Be sure to put the strap around your wrist, and hold the camera firmly to
avoid dropping it.
Depending on the way you tap the camera, images may not switch.
Switch to next image Switch to previous image
Tilt the camera to switch images
If you touch and hold q on the left of the screen and tilt the camera as shown while switching through images (p. 28), the images advance quickly. Tilt the camera in the opposite direction while holding r.
While dragging an image, if you touch and hold q or r the image will appear coarse.
29
Erasing Images
You can choose and erase images one at a time. Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image.
Enter Playback mode.
z Press the 1 button.
X The last image you took will appear.
Choose an image to erase.
z Drag across the screen to choose an
image.
Erase the image.
z After touching ø, drag up or down the
screen to choose a, then touch the menu item again.
X [Erase?] appears on the screen.
z Touch [Erase].
X The displayed image will be erased.
z To exit instead of erasing, touch [Cancel].
You can also use Touch Actions to erase images (p. 131).
30
Loading...
+ 182 hidden pages