Canon 5600F, 2925B002 User Manual

Quick Start Guide

Please read this guide before operating this scanner. After you finish reading this guide, store it in a safe place for future reference.

Table of Contents

Package Contents............................... 1 Scanning with MP Navigator EX......... 7

Installing the Software......................... 2 Scanning Film ..................................... 8

Preparing the Scanner........................ 4 Specifications...................................... 11

Try Scanning....................................... 5 Safety Precautions.............................. 12

Using the Scanner Buttons ................. 6

FCC Notice (U.S.A. Only)

For 120V, 60Hz model Model Number : K10319

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.

Canon U.S.A., Inc. One Canon Plaza Lake Success, NY 11042 1-516-328-5600

Warning

When you use this product, you should pay attention to the following legal issues:

• Scanning of certain documents, such as bank notes (bank bills), government bonds and public certificates, may be prohibited by law and may result in criminal and/or civil liability.

• You may be required under law to obtain authorization from a person possessing copyrights or other legal rights to the item being scanned.

If you are uncertain of the legality of scanning any particular item, you should consult your legal adviser in advance.

• Microsoft is a registered trademark of Microsoft Corporation.

• Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.

• Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.

• Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.

• Adobe, Adobe RGB and Adobe RGB (1998) are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and or other countries.

•

• Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies.

Package Contents

Scanner and Accessories

Package Contents

USB Cable

Film Guide (for 35mm film strip/slide)Scanner Power Cord

Documentation

• Quick Start Guide (this document)

• Additional Documents

Setup CD-ROM

• Software Programs

- ScanGear (scanner driver)

- MP Navigator EX (utility software)

- Solution Menu (menu panel software)

- ArcSoft PhotoStudio (image editing software)

• On-screen Manuals

- Scanning Guide (on-screen manual) (for ScanGear, MP Navigator EX, and troubleshooting)

- Manuals for bundled application programs

*In this guide, Windows Vista operating system screenshots are used to illustrate explanations common

to all operating systems.

Installing the Software

• Do NOT connect the scanner to a computer before installing the software. If you connect the scanner and the Found New Hardware screen appears, unplug the USB cable from the computer and click [Cancel]. The screen may close automatically when the USB cable is unplugged.

• Quit all running applications before installation.

• To upgrade from Windows XP to Windows Vista, first uninstall software bundled with the Canon scanner.

• Log in as an administrator to install the software.

• Do not switch users during the installation process.

1 Place the Setup CD-ROM in the drive.

For Macintosh: Double-click the [Setup] icon. Enter the administrator ID and password on the authentication dialog box.

For Windows 2000/XP and Macintosh, skip step 2 and go to step 3.

2 For Windows Vista, when the AutoPlay dialog box

appears, run the setup program, and then click [Continue] to proceed when the User Account Control dialog box appears.

3 If prompted, select your language and place of residence.

In some countries, these dialog boxes will not appear.

4 Click [Easy Install] on the main menu.

5 Click [Install] to start installation.

Carefully read the License Agreement, and then click [Yes] to proceed.

6 Follow the on-screen instructions to perform the

installation.

7 When the User Registration screen appears, follow the

on-screen instructions to ensure product support.

For Macintosh, skip step 8 and go to step 9.

Installing the Software

8 For Windows, when the Extended Survey Program

screen appears, confirm it.

If you can agree, click [Agree].

9 When the installation is complete, click [Restart] to restart

your computer.

For Windows: After restarting the computer, Solution Menu will appear.

For Macintosh: After restarting the computer, [Solution Menu] icon will be registered in the Dock.

<Solution Menu> You can select either MP Navigator EX or the Scanning Guide (on-screen manual), or the Online Registration.

• Make sure to remove the CD-ROM from the drive and store it in a safe place.

• If you encounter a problem during installation, see "Troubleshooting" in the Scanning Guide (on-screen manual).

+ 11 hidden pages