Statement-R, Executive, Envelopes
(COM10 No.10/Monarch/DL/ISO-B5/
ISO-C5), Custom Size (3-15/16" to
11-11/16" x 5-7/8" to 17" [99mm to
297mm x 148mm to 432mm])
(64 to 90g/m2)
(64 to 128g/m2)
Cassette 2:Envelopes
Bypass:Transparencies, Labels, Envelopes
Document Tray-J1
Cabinet Type-C
Warm-up Time
From Power On: 30 Seconds or Less
From Sleep Mode: 1 Second or Less
Power Requirements
120V AC, 60Hz, 6.9A
Plug
NEMA 5-15P
Power Consumption
Maximum: 1,473W; Sleep Mode: 1W
Dimensions (H x W x D)
35-1/4" x 22-1/4" x 27-1/4"
(896mm x 565mm x 693mm) (with DADF)
31-3/4" x 22-1/4" x 26-3/4"
(806mm x 565mm x 680mm) (with Platen Cover)
Installation Space (W x D)
42-1/2" x 56-3/4" (1079mm x 1441mm)
(with no optional equipment attached)
54" x 56-3/4" (1371mm x 1441mm)
(with optional Inner Finisher-B1 attached)
Weight
Approximately 156 lb. (70.7kg) (Main Unit)**
Approximately 172 lb. (78kg) (with DADF)**
Toner (Estimated Toner Yield)
14,600 Images @ 6% Coverage
Page 2
Main Unit (continued)
Copy Specifications
First-Copy-Out Time (Letter)
5.4 Seconds
Multiple Copies
1 to 999
Copy Exposure
Automatic or Manual (9 Levels)
Magnification
25% - 400% (1% Increments)
Preset Reductions
25%, 50%, 64%, 73%, 78%
Preset Enlargements
121%, 129%, 200%, 400%
Basic Copy Features
Preset R/E Ratios by Area, Finishing, Two-sided,
Exposure Adjustment, Original Type Selection
Special Copy Features
ID Card Copy, Two-page Separation, Image
Combination, Frame Erase, Different Size Original,
Sharpness, Mode Memory, Booklet
Job Forwarding, Different Size Originals, Sharpness,
Delayed Send, Finished Stamp, Two-sided Original
Security Specifications
Department ID Management, User ID Management,
IPv6, Restricting Features (Restricting the Send
Function, Restricting New Addresses on Address
Book, Address Book Password, Allow Fax Driver TX,
Restrict Recall, Confirm Entered Fax Numbers, Restrict
Sequential Broadcast), SNMPv1, MAC/IP Address
Filtering, SMTP Authentication, POP Authentication
before SMTP
Environmental Information
• ENERGY STAR® Qualified
• RoHS Compliant
• Ecomark
• Blue Angel
• WEEE Directive
Optional Accessories
l
DADF-AB1
Scan Method:Duplexing Automatic
Acceptable
Originals:
Acceptable
Paper Weight:
Scan Speed
(BW/Color;
Letter):
Paper Capacity: 50 Sheets (Letter)
Power Source/
Consumption:
Dimensions
(H x W x D):
Weight:Approximately 15.4 lb. (7.0kg)
Paper Supply Options
Cassette Feeding Unit-AE1
Paper Capacity: 550 Sheets x 2 Cassettes
Acceptable
Paper Weight:
Acceptable
Paper Size:
Acceptable
Paper Type:
Power Source/
Consumption:
Dimensions
(H x W x D):
Weight:Approximately 52.9 lb. (24.0kg)
Envelope Feeder Attachment-D1
Paper Capacity: 50 Sheets (or 30mm in height)
Acceptable
Envelope Size:
Print Speed:Up to 10 ppm
Document Feeder
11" x 17", Legal, Letter, Letter-R,
or Statement
14 lb. Bond to 28 lb. Bond
(52 to 105g/m2)
28 lb. Bond to 34 lb. Bond
(105 to 128g/m2) when scanning
a single-page document
Copy: 25 ipm (600 dpi)
Scan: 35/25 ipm (300 dpi)
From the Main Unit/Approximately
27.1W (Maximum)
5" x 21-3/8" x 22-1/4"
(126mm x 544mm x 565mm)
(20 lb. Bond)
17 lb. Bond to 24 lb. Bond
(64 to 90g/m2)
11" x 17", Legal, Letter, Letter-R,
Statement-R, Executive
Plain, Recycled, Color (17 lb. Bond
to 21 lb. Bond/64 to 80g/m2),
Pre-Punched
From the Main Unit/Approximately
17.4W (Maximum)
9-3/4" x 22-1/4" x 26-3/4"
(97mm x 565mm x 680mm)
††
COM10 No.10, Monarch, DL,
ISO-B5, ISO-C5
Page 3
Optional Accessories (continued)
Output Options
Inner Finisher-B1
Number of
Tray s:
Total Output
Capacity:
Acceptable
Paper Weight:
Acceptable
Paper Size:
Acceptable
Paper Type:
Staple
Positions:
Stapling
Capacity (Max.):
Paper Capacity
of Staple Mode:
†††
Up to 2 Trays (w/Inner Finisher
Additional Tray-B1)
Without Inner Finisher Additional Tray-B1:
1,000 Sheets
11" x 17", Legal, Letter, Letter-R,
Statement, Statement-R, Executive
Plain, Recycled, Color (17 lb. Bond
to 21 lb. Bond), 3-hole punch, Heavy
Paper 1 (22 lb. Bond to 24 lb. Bond),
Heavy Paper 2 (24 lb. Bond to 28 lb.
Bond), Heavy Paper 3 (28 lb. Bond
to 34 lb. Bond)
Corner/Double Stapling: 11" x 17",
Legal, Letter, Letter-R
50 Sheets (Letter)
30 Sheets (11" x 17", Legal, Letter-R)
(17 lb. Bond to 21 lb. Bond)
Top Tray: 15 Sets (or 3/8" in height)
Lower Tray: 30 Sets (or 4-7/8" in height)
Type of Staple: Staple-J1 (5,000 x 3)
Power Source/
Consumption:
Dimensions
(H x W x D):
From the Main Unit/Approximately
43.9 W (Maximum)
11-3/5" x 27-3/4" x 21-7/8"
(295mm x 703mm x 554mm)
(When the auxiliary tray is extended)
Weight:Approximately 27.6 lb. (12.5kg)
Inner 2-Way Tray-G1
Number of
Tray s:
Total Output
Capacity:
Acceptable
Paper Weight:
Acceptable
Paper Size:
Acceptable
Paper Type:
Dimensions
(H x W x D):
†††
2
Top Tray: 100 Sheets (Letter)
Lower Tray: 250 Sheets (Letter)
17 lb. Bond to 34 lb. Bond
(64 to 128g/m2)
11" x 17", Legal, Letter, Letter-R,
Statement-R, Executive
Plain, Recycled, Color (17 lb. Bond
to 21 lb. Bond), 3-Hole Punch, Heavy
Paper 1 (22 lb. Bond to 24 lb. Bond),
Heavy Paper 2 (24 lb. Bond to 28 lb.
Bond), Heavy Paper 3 (28 lb. Bond
to 34 lb. Bond)
4-1/4" x 16-3/4" x 16-1/4"
(109mm x 426mm x 413mm)
Weight:Approximately 1.3 lb. (0.6kg)
Other Optional Accessories
• Platen Cover Type P
• Cabinet Type-C
• Inner Finisher Additional Tray-B1
• Document Tray-J1
• PCL Printer Kit-AF1
• PS Printer Kit-AF1
• Barcode Printing Kit-B1
• Color Send Kit-Y1
• Searchable PDF Kit-C1
• Super G3 Fax Board-AG1
• Card Reader-E1
• Card Reader Attachment-D3
• ADF Access Handle-A1
• Braille Label Kit-F1
• USB Application 3-Port Interface Kit-A1
• USB Keyboard (Cherry)
• Copy Control Interface Cable-A1
* The optional Envelope Feeder Attachment-D1 is required.
** Includes consumables.
*** The optional Searchable PDF Kit-C1 is required.
l You must install either the DADF-AB1 or Platen Cover
Type P with the main unit.
†
The Cassette Feeding Unit-AE1 and Cabinet Type-C
cannot be installed at the same time.
††
Installs on the second paper cassette.
†††
The Inner Finisher-B1 and Inner 2-Way Tray cannot
be installed at the same time.
▲
Requires PCL Printer Kit-AF1.
▲▲
Requires Color Send Kit-Y1.
▲▲▲
Requires the Card Reader Attachment-D3 for installation.
◆
Card Reader-E1 and Copy Control Interface Cable-A1