CANOGA PERKINS 9119 User Manual

Canoga Perkins

9119

Rack Mount

User Manual

100BASE-TX/FX

Media Converter

Canoga Perkins

Canoga Perkins reserves the right to change or update the contents of this manual and to change the specifi­cations of its products at any time without prior notification. Every effort has been made to keep the informa­tion in this document current and accurate as of the date of publication or revision. However, no guarantee is
given or implied that the document is error free or that it is accurate with regard to any specification.

Canoga Perkins has prepared this manual for use by customers and Canoga Perkins personnel as a guide for
the proper installation, operation and/or maintenance of Canoga Perkins equipment. The drawings, specifi­cations and information contained in this document are the property of Canoga Perkins and any unauthorized
use or disclosure of such drawings, specifications and information is prohibited.

9119 Media Converter

NOTICE

Canoga Perkins Corp.

20600 Prairie Street

Chatsworth, CA 91311-6008

[phone]

FAX: [phone]

Web Site: http://www.canoga.com

email: [e-mail]

Copyright 1999 - 2005 Canoga Perkins

All Rights Reserved

9119 100BASE-TX to Fiber Media Converter

Part Number 6911560, Rev. G 09/2005

To reference Technical Advisories and Product Release Notes, go to Canoga Perkins' website:

http://www.canoga.com

3

Canoga Perkins 9119 Media Converter

9119 100BASE-TX/FX

Media Converter

4

Canoga Perkins

9119 Media Converter

Caution!

This product may contain a laser diode emitter operating at a wavelength of 1300nm - 1600nm. Use of optical instru­ments (for example: collimating optics) with this product may increase eye hazard. Use of controls or adjustments or
performing procedures other than those specified herein may result in hazardous radiation exposure.

Under normal conditions, the radiation levels emitted by this product are under the Class 1 limits in 21 CFR Chapter 1,
Subchapter J.

ATTENTION!

Cet équipement peut avoir une diode laser émettant à des longueurs d'onde allant de 1300nm à 1600nm. L'utilisation
d'instruments optiques (par exemple : un collimateur optique) avec cet équipement peut s'avèrer dangereuse pour les yeux.
Procéder à des contrôles, des ajustements ou toute procédure autre que celles décrites ci-après peut provoquer une
exposition dangereuse à des radiations.

Sous des conditions normales, le niveau des radiations émises par cet équipement est en dessous des limites prescrites
dans CFR21, chapitre 1, sous chapitre J.

Notice!

This device contains static sensitive components. It should be handled only with proper Electrostatic Discharge
(ESD) grounding procedures.

NOTE!

Cet équipement contient des composants sensibles aux décharges électro-statiques. Il doit absolument être mani­pulé en respectant les règles de mise à la terre afin de prévenir de telles décharges.

5

Canoga Perkins 9119 Media Converter

9119 Table of Contents

1. Introduction .................................................................................................................. 9

1.1 Ship List ................................................................................................................................................... 9

1.2 Applications .......................................................................................................................................... 10

2. Setup and Installation .............................................................................................. 11

2.1 Overview ............................................................................................................................................... 11

2.2 Unpacking .............................................................................................................................................. 12

2.3 Setup of the 9119 Media Converter ....................................................................................................... 12

2.3.1 UTP Connection ................................................................................................................................ 12

2.3.2 Fiber Connection ............................................................................................................................... 12

2.3.3 Relay Connections ............................................................................................................................. 13

2.4 Installing the 9119 Media Converter ....................................................................................................13

2.4.1 Stand Alone Unit................................................................................................................................. 14

2.4.2 Rack Mount Installation ..................................................................................................................... 14

2.4.3 10/100 Auto Negotiation Application Note ....................................................................................... 15

2.4.4 Fiber Link Loss Forwarding Application Note .................................................................................. 15

3. Operation................................................................................................................... 17

3.1 LED Indicators ...................................................................................................................................... 17

3.2 Loss Budget ........................................................................................................................................... 18

3.2.1 100BASE-FX Multimode (MM) 1310nm LED ................................................................................. 18

3.2.2 100BASE-FX Single Mode (SM) 1310nm LP Laser ......................................................................... 19

3.2.3 100BASE-FX Single Mode (SM) 1310nm LD Laser ........................................................................ 19

3.2.4 100BASE-FX Single Mode (SM) 1550nm XD Laser ........................................................................19

4. Troubleshooting ........................................................................................................ 21

5. Technical Specifications ........................................................................................... 23

5.1 100BASE-FX Multimode (MM) 1310nm MM LED ............................................................................ 23

5.2 100BASE-FX Single Mode (SM) 1310nm LP Laser ............................................................................ 23

5.3 100BASE-FX Single Mode (SM) 1310nm LD Laser ........................................................................... 24

5.4 100BASE-FX Single Mode (SM) 1550nm XD Laser ...........................................................................24

5.5 Electrical / Functional ............................................................................................................................ 25

5.6 Physical / Environmental ....................................................................................................................... 25

6. Glossary ....................................................................................................................27

Appendix A .................................................................................................................... 29

6

Canoga Perkins

9119 Media Converter

List of Figures

1-1 9119 Typical Application ..................................................................................................................................... 10

1-2 9119 NIC Connection .......................................................................................................................................... 10

2-1 Top, Front and Rear Views of 9119 Media Converter ......................................................................................... 11

2-2 UTP Connector for 9119 Media Converter .......................................................................................................... 12

2-3 Fiber Optic Cable Connections on Rear Panel ..................................................................................................... 13

2-4 Relay Terminal Block ........................................................................................................................................... 13

2-5 9101 LAN Chassis ................................................................................................................................................ 14

2-6 Fiber Break Responses ......................................................................................................................................... 15

3-1 9119 LED Indicators ............................................................................................................................................ 17

7

Canoga Perkins 9119 Media Converter

This page is intentionally left blank.

8

Canoga Perkins

9119 Media Converter

1. Introduction

The Canoga Perkins Model 9119 100BASE-TX to FX Media Converter provides 100Mbps fiber optic connectivity be­tween 100Mbps switches and/or work stations.

The 9119 Media Converter allows users who already possess Fast Ethernet switches to convert from a 100BASE-TX UTP
interface to a 100BASE-FX-based single mode fiber optic interface and exceed the 100BASE-FX multimode limitation of
2km on fiber optic cable, in full-duplex (FDX) mode and achieve greater than 100km connectivity.

The 9119 Media Converter is also especially suited for harsh manufacturing environments where immunity to noise and
electrical / magnetic interference or security considerations are of particular importance. Conforms to NEBS Level 3
Standards.

The 9119 Media Converter comes in four versions:

• 100BASE-FX 1310nm Multimode (MM) LED (11dB loss budget)

• 100BASE-FX 1310nm Single Mode (SM) LP Laser (10dB loss budget)

• 100BASE-FX 1310nm Single Mode (SM) LD Laser (26dB loss budget)

• 100BASE-FX 1550nm Single Mode (SM) XD Laser (26dB loss budget)

The 9119 Media Converter has the following features:

• Converts UTP interfaces to fiber

• Link Loss Forwarding from fiber port to the UTP interface

• Remote Fault Detection and Alarm Forwarding on the fiber interface

• Normal or crossed-over UTP connections

• Dry Contact Alarm Relays

• Provides noise / interference immunity

• Provides virtually untappable security

• Distance exceeding 100km on fiber

• Single Mode or Fiber Support (Multimode)

• Six status LED indicators

• ST and SC connectors

1.1 Ship List

The following items are included:

• 9119 Media Converter

• User Manual

• Wall-Mount Power Supply with 6-foot power cord

• Tie Wrap/Velcro Kit

• Ten-foot Category 5, Twisted Shielded Pair (STP) patch cable

9