Read this manual carefully. It
contains important information.
Keep it for future reference.
Safety Messages
In this supplement, particularly important information
is presented in the following ways:
Indicates a hazardous situation which,
if not avoided, may result in death or
serious injury.
NOTICE
Indicates special precautions that
must be taken to avoid damage.
English
This Owners Manual
This manual provides important safety,
maintenance, and technical information.
It is not intended as a comprehensive
assembly, use, service or repair guide.
You can download Adobe Acrobat PDF
versions of any manual/supplement from
our website: http://www.cannondale.
com.
Contacting Cannondale
Cannondale USA
Cycling Sports Group, Inc.
1 Cannondale Way,
Wilton CT, 06897, USA
1-800-726-BIKE (2453)
Cycling Sports Group Europe B.V
Mail: Postbus 5100
Visits: Hanzepoort 27
7575 DB, Oldenzaal, Netherlands
CONTENTS
Safety Information ............................2-5
To make sure your wheels are serviced
and maintained correctly, and that you
protect applicable warranties, please
coordinate all service and maintenance
through your Authorized Cannondale
Dealer.
134944 Rev 1.
NOTICE
Unauthorized service, maintenance,
or repair parts can result in serious
damage and void your warranty.
Patent Information
Hollowgram 64 KNØT wheels are
covered by one or more of the following
U.S. Patent Nos.: 8,888,195 and
9,463,666
1
HollowGram Wheel Set Owners Manual
SAFETY INFORMATION
Before you use your wheels, please read each of the WARNING listed in
this section. Each one is focused on a specic safety risk which you must
understand.
WARNINGS
INTENDED USE: For bicycle use only. Using this product the wrong way is
dangerous. For Intended Use of your specic model wheel, see ‘Specications” in
this manual. For more ASTM and Intended Use information go to www.cannondale.
com.
PERFORM THE PRE-RIDE INSPECTION BEFORE EVERY RIDE: A pre-ride
inspection is important to identify and correct potential problems before you use the
wheels. See “Pre-Ride Inspection in this manual.”
COMPATIBILITY: Before using a wheelset on a bike, make sure the wheelset is
compatible with the frame and fork (e.g., clearance, chain line, brake type, dropout
spacing). Conrm specications in frame manufacturer instructions for the frame.
WEIGHT LIMIT: HollowGram Wheels have a weight limit. The limit for a specic
HollowGram Wheel model is found in the “Specication” section of this manual. The
weight limit is the total combined weight of the Rider, the bike and any items carried
on the bike/rider.
DO NOT MAKE CHANGES OR MODIFY THE WHEELS: Wheelsets are
manufactured and tested using approved components (e.g., hubs, rims, rim
tape/strip, spokes, spoke nipples, valves, and specied tire type). Changing or
substituting any of these parts can result in damage to the wheel assembly leading
to an accident or voiding of applicable warranties.
YOU CAN BE SEVERELY INJURED, PARALYZED OR KILLED IN AN ACCIDENT IF YOU
IGNORE THESE WARNINGS.
134944 Rev 1.
2
English
WARNINGS
INSPECTION & CRASH/IMPACT DAMAGE: After any crash or impact, immediately
stop riding. Have the the entire wheel (rim, hub, spokes, tire, and frame) inspected
by a trained professional bicycle mechanic for any damage (e.g., bending, cracks,
deep scratches or scoring, missing, bent, deformed, or loose spokes). See“Wheel
Inspections” in this manual for the kinds of damage that can occur following a crash
or impact.
MAXIMUM AIR PRESSURES (Tire and Rim): Exceeding the maximum pressure
of either tire or rim could lead to tire or rim failure, or both. Find the maximum
air pressure marked on the rim. Find the maximum air pressure indicated on the
tire sidewall marking. Do not exceed the lower maximum air pressure value. See
“Specications” for maximum rim pressure.
USE ONLY BICYCLE AIR PUMPS: Do not use gas station air hoses or other air
high volume air compressors. These pumps move a large volume of air very rapidly
and will raise the pressure in your tire very rapidly, which could cause the tube to
explode. CAUTION: Pencil type automotive tire gauges can be inaccurate and
should not be relied upon for consistent, accurate pressure readings. Instead, use a
high quality dial gauge.
WHEEL INSTALLATION/REMOVAL: Follow the manufacturer instructions when
installing and removing a wheel using thru-axle mechanisms. If attached incorrectly,
the wheels may wobble or fall off the bicycle, or suddenly stop the wheel, which can
cause serious injury or death. Be careful not to damage the disc, caliper or brake
pads when re-inserting the disc into the caliper. Remember, do not activate a disc
brake’s control lever unless the disc is correctly inserted in the caliper. Activating the
lever without the wheel/brake rotor installed may close the caliper pads, interfering
with wheel installation.
YOU CAN BE SEVERELY INJURED, PARALYZED OR KILLED IN AN ACCIDENT IF YOU
IGNORE THESE WARNINGS.
134944 Rev 1.
3
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.