Cannon Windsor Mk2 10297G, Windsor Mk2 10296G, Windsor Mk2 10295G User Manual

Windsor Mk2

Instruction Book

This appliance must be installed in accordance with the regulations in

force and only used in a well ventilated space.

Read these instructions before installing or using the appliance and retain

them for future use.

The data badge is located below the oven door on the plinth panel.

Part no. 4866200052-04

CONTENTS

PAG E

Introduction 3

For Your Safety 4

Oven Timer Operation 6

Hotplate 12

Grill 14

Oven 15

Oven Cooking Chart 17

The “E” Setting 19

Care and Cleaning 20

Something Wrong with your cooker? 24

Installation Instructions 26

Key Contacts Back Cover

2

INTRODUCTION

To help you make the best use of your cooker, PLEASE READ THIS BOOKLET
CAREFULLY.
Your new cooker is guaranteed and will give lasting service. The guarantee is only
applicable if the cooker has been installed in accordance with the Installation
Instructions.
The cooker is designed specifically for domestic use and responsibility will not be
accepted for use in any other installation.
When first using the cooker ensure that the room is well ventilated (e.g. open a
window or use an extractor fan) and that persons who may be sensitive to the odour
avoid any fumes. It is suggested that any pets be removed from the room until the
smell has ceased. This odour is due to any temporary finish and also any moisture
absorbed by the insulation.

FEATURES

SIMMERING BURNERS

HIGH SPEED BURNERS

DATA BADGE

VENTILATION SLOTS

GLASS LID WITH CUT OFF VALVE

VENTILATION SLOTS

AUTOMATIC OVEN TIMER

GRILL

MAIN OVEN

3

FOR YOUR SAFETY

Please read the precautions below before using your cooker.

ALWAYS . . .

ALWAYS make sure you understand the controls before using the cooker.

ALWAYS check that all controls on the cooker are turned off after use.

ALWAYS stand back when opening an oven door to allow heat to disperse.

ALWAYS use dry, good quality oven gloves when removing items from the ovens.

ALWAYS take care when removing items from the top oven/grill when the main

oven is on, as the contents may be hot.

ALWAYS keep the oven and grill doors closed when the cooker is not in use.

ALWAYS place pans centrally over the hotplate burners and position them so that

the handles cannot accidentally be caught or knocked or become heated
by other burners.

ALWAYS keep the cooker clean, as a build up of grease or fat from cooking can

cause a fire.

ALWAYS allow the cooker to cool before cleaning.

ALWAYS follow the basic principles of food handling and hygiene to prevent the

possibility of bacterial growth.

ALWAYS keep ventilation slots clear of obstructions.

ALWAYS turn off the electricity supply before cleaning or replacing the oven

lamp.

ALWAYS refer servicing to CORGI registered appliance service engineers.

4

FOR YOUR SAFETY

NEVER . . .

NEVER leave children unsupervised where the cooker is installed as all surfaces

will get hot during and after use.

NEVER allow anyone to sit or stand on any part of the cooker.

NEVER store items that children may attempt to reach above the cooker.

NEVER heat up unopened food containers as pressure can build up causing

the container to burst.

NEVER

NEVER fill a deep fat frying pan more than 1/3 full of oil, and never use a lid.

NEVER place flammable or plastic items on or near the hotplate.

NEVER use proprietary spillage collectors on the hotplate.

NEVER use the cooker as a room heater.

NEVER dry clothes or place other times over or near to the hotplate or oven/

NEVER wear garments with long flowing sleeves whilst cooking.

NOTE: The use of a gas cooking appliance results in the production of heat and
moisture in the room in which it is installed. Always ensure that the kitchen is well
ventilated; keep natural ventilation holes open or install a mechanical ventilation
device (mechanical extractor hood).

In particular, when using the grill or more than one hotplate burner, open a window if
a mechanical ventilation device is not operating.

store chemicals, food stuffs, pressurised containers in or on the cooker,
or in cabinets immediately above or next to the cooker.

DO NOT LEAVE UNATTENDED WHILE COOKING.

grill doors.

5

OVEN TIMER OPERATION

The oven timer offers you the following features:

1. Time of Day

2. Automatic Cooking

3. Minute Minder

GUIDANCE ON AUTOMATIC COOKING

1. Select foods which will take the same time to cook.

2. Set the oven timer so that the food has just finished or is just about to finish
cooking on your return to the oven. This will ensure the food has not cooled
down and does not require reheating before serving.

3. Food should be as cold as possible when it goes into the oven, ideally straight
from the refrigerator. Frozen meat and poultry should be thawed thoroughly
before it is put in the oven.

4. Warm food should never be placed in the oven if there is to be a delay period. Stews
prepared by frying the meat and vegetables should be cooked as soon as possible.

5. Dishes containing left-over cooked poultry or meat, for example Shepherds Pie,
should not be cooked automatically if there is to be a delay period.

6. Stews and joints should be cooked by the long slow method, so that the delay
period is kept to a minimum.

7. On warm days, to prevent harmful bacterial growth in certain foods (ie poultry,
joints, etc) the delayed start should be kept to a minimum.

8. Wine or beer may ferment and cream may curdle during the delay period, so it is
best to add these ingredients just before serving.

9. Foods which discolour should be protected by coating in fat or tossing in water to
which lemon juice has been added, prior to placing food in the oven.

10. Dishes containing liquid should not be filled too full to prevent boiling over.

11. Food should be well sealed (but not airtight) in a container to prevent the loss of
liquid during cooking. Aluminium foil gives a good seal.

12. Ensure food is cooked thoroughly before serving.

6

KNOW YOUR TIMER

Cook

Period

End

Time

Manual

A
U
T
O

A
U
T
O

Minute
Minder

Cook

Period

End

Time

Manual

CLOCKFACE

The timer incorporates a 24 hour clock.

Ensure the correct time of day is always set, before using you cooker.
PLEASE NOTE THA
HOURS AND 06.00 HOURS TO PREVENT GLARE.
However, should you operate the timer during these hours the display will
return to normal brightness for a few seconds and then dim again.

SYMBOLS

will light up when you select a Minute Minder Period and will remain lit for
the period set. At the end of the Minute Minder Period, the timer will emit an
audible tone for 2 minutes, the symbol will start to flash and will continue to
flash until the Minute Minder function is cancelled.

This “Cookpot” symbol will light up either:–
– When you press the Cook Period Button and set a length of time for an
Auto Cooking Programme. (It will go out again a few seconds after you
release the timer buttons).
– During the actual Cook Period.

“AUTO” will light up:–
– When the timer is first turned on it will flash. (It will go out when a time
of day is set).
– When an Auto Cooking Programme has been set.
The “Auto” symbol will flash at the end of an Auto Cooking programme to
indicate that the programme has finished.

(When the “Auto” symbol is flashing, to return the oven to Manual
operation, turn the oven controls off, ensure that the correct time of
day is set, and press the “Manual” button twice – The “Auto”
symbol will go out.

T THE DISPLAY WILL DIM BETWEEN 22.00

TIMER FUNCTION BUTTONS

Minute Minder
Button

Here you can set a time period of up to 23 hours 59 minutes, that will count down.
When it reaches zero, the timer will emit an audible tone.

For Example: If you set 20 minutes, the audible tone will occur 20 minutes later.

AUTO COOKING PROGRAMME

Cook Period Button

End Time Button

Manual Button

“+” and “–” Buttons

Cook Period is the actual length of time for which, the timer will switch
the oven on as part of an “Auto Cooking” programme.
(e.g. If you set 2 hours, the food will be cooked for 2 hours).

The time of day at which you want an “Auto Cooking” programme to end.
For Example: If you set a “Cook Period” for 2 hours, and “End Time” of 11:00.

The timer will switch the oven on at 9:00 and turn the oven off at 11:00. You
will hear a audible tone at 11:00, to indicate that the Auto Cooking Programme
has finished.

Notes:

– When setting an Auto Cooking programme you will need to set the
oven control to the required temperature when you set the timer.
– If an Auto Cooking programme has been set the oven will only operate
during the pre-programmed time.

Needs to be pressed to cancel an Auto Cooking programme and return the
oven to Manual operation.

Used to adjust the various timer function settings.

7

OVEN TIMER OPERATION

A

U

T

O

Minute
Minder

Cook

Period

End

Time

Manual

Minute
Minder

Cook

Period

End

Time

Manual

Bell Symbol

Minute
Minder

Cook

Period

End

Time

Manual

Minute
Minder

Cook

Period

End

Time

Manual

SETTING THE TIME OF DAY

Step 1 Make sure all oven controls are turned Off.

Step 2 Check the electricity supply to the cooker is turned on.

Step 3 When switched on the display will show 0.00 and Auto symbol

will be flashing intermittently.

Step 4 Press & hold in both the “Minute Minder” & “Cook Period” button

together.

Step 5 With the “Minute Minder” & “Cook Period” buttons still held in,

press either the “+” or “–” buttons to set the correct time of day.

Step 6 Release all the buttons simultaneously.

THE TIME OF DAY IS NOW SET.

To change the time of day repeat Steps 4, 5 & 6 above.

Note: You cannot adjust the time of day if the timer has been set
for an Auto Cooking Programme.

SETTING THE MINUTE MINDER

Step 1 Ensure the time of day is set correctly.

Step 2 Press and hold the Minute Minder Button, a symbol will light up.

Step 3 With the “Minute Minder” button held in, set the required Minute

Minder time using the “+” and “–” buttons.

Release all buttons and the timer display will revert back to the time of day. Bell
symbol will remain lit to signify that a Minute Minder period has been set.

At the end of the set time a bleeping sound will be heard, and the symbol
will flash for approximately 2 minutes.

After approximately 2 minutes the bleeping sound will stop and the
symbol will go out automatically.

Step 4 To cancel the bleeping sound within the two minutes press the

Note 1 When the Minute Minder has been set, the time remaining can be

Note 2 If necessary the Minute Minder can be cancelled before the tone sounds

checked at any time by simply pressing the Minute Minder button.

Minute Minder button.

by pressing and holding the Minute Minder button and then at the same
time pressing the “–” button until 0.00 appears in the display window.

8

OVEN TIMER OPERATION

Minute
Minder

Cook

Period

End

Time

Manual

Cooktop Symbol

A
U
T
O

A
U
T
O

Minute
Minder

Cook

Period

End

Time

Manual

A
U
T
O

Minute
Minder

Cook

Period

End

Time

Manual

Minute
Minder

Cook

Period

End

Time

Manual

AUTO COOKING PROGRAMMES

There are two Auto Cooking programmes that can be selected using your timer:–
(a) To set the timer to switch the oven On and Off Automatically

(b) To set timer to switch on immediately and OFF automatically after a set cook period.

a) TO SET THE TIMER TO SWITCH THE OVEN ON AND OFF AUTOMATICALLY

This allows you to cook at a specified time for a chosen period before the oven
switches off Automatically.

Step 1 Check that the correct time of day is set, if not follow instructions for setting the

time of day.

Step 2 Place food onto the correct shelf position in the oven and close the oven door.

Step 3 Press and hold in the Cook Period button.

The display will read 0.00 with the cookpot ( ) symbol lit.

Step 4 With the Cook Period button still held in, set the required Cook

Period using the “+” and “–” buttons.

Release the buttons and the timer display will revert to the time of day with
the Auto symbol and Cookpot ( ) symbol lit.

Step 5 Press and hold in the “End Time” button.

The display will read the earliest possible end time for the Cook
Period that you have set above.
The Auto symbol and Cookpot ( ) symbol lit.

Step 6 With the End Time button still held in, use the “+” and “–” buttons

to set the “End Time” (i.e. The time you require the oven to switch
off).

Release all the buttons and the timer will revert back to the time of day.

The “Auto” symbol will remain lit to signify that an Auto Cooking Programme
has been set. The ( ) symbol will go out.

Step 7 Turn the oven control to the required temperature, and if

necessary select the appropriate oven function.

At the end of the Automatic Cook Period the Auto Symbol will flash and
an intermittent bleeping sound will be heard.
The bleeping sound will continue for approximately 2 minutes unless
cancelled. The “Auto” symbol will continue to flash until the timer is returned to
Manual operation (see below).

Step 8 Press the Manual button to cancel the bleeping sound. (If 2 minutes
has not elapsed).

Step 9 Turn the oven control to the OFF position.

Step 10 Press the manual button again to return the oven to Manual

Operation. (The Auto symbol will go out)

9

OVEN TIMER OPERATION

A
U
T
O

Minute
Minder

Cook

Period

End

Time

Manual

Cookpot Symbol

A
U
T
O

A
U
T
O

Minute
Minder

Cook

Period

End

Time

Manual

A
U
T
O

Minute
Minder

Cook

Period

End

Time

Manual

Note 1 When cooking automatically the Cook Period can be checked at any time

by simply pressing the Cook Period button.

Note 2 When cooking automatically the End Time can be checked at any time by

simply pressing the End Time button.

b) TO SET TIMER TO SWITCH ON IMMEDIATELY AND OFF AUTOMATICALLY AFTER A SET

COOK PERIOD

Step 1 Check that the correct time of day is set, if not follow instructions for setting the time of day.
Step 2 Place food onto the correct shelf position in the oven and close the oven door.
Step 3 Turn the oven control to the required temperature, and if necessary select the appropriate

Note: Cookpot symbol disappears

oven function.

Step 4 Press & hold in the “Cook Period” button, the display will read 0.00
and the cookpot ( ) symbol will light up.

With the Cook Period button still held set the required Cook Period using the
“+” and “–” buttons. Example: 1hr 30 minutes (as shown).

Note: Cook Period is the length of time the food requires to cook.

Step 5 Release all buttons.

The timer display will revert to the time of day with the Auto symbol lit &
Cookpot symbol remaining lit.

At the end of the Cook Period the “Auto” symbol will flash and an

intermittent bleeping sound will be heard.
The bleeping sound will continue for approximately 2 minutes unless
cancelled. The “Auto” symbol will continue to flash until the timer is returned
to Manual operation (see below).

Step 6 Press the manual button to cancel the bleeping.

(If 2 minutes has not elapsed)

10

Step 7 Turn the oven control to the OFFposition.

Step 8 Press the “Manual” button again to return the oven to Manual

operation. (The Auto symbol will go out).

Minute
Minder

Cook

Period

End

Time

Manual

A
U
T
O

Cook

Period

End

Time

Manual

OVEN TIMER OPERATION

TO CANCEL AN AUTO COOKING PROGRAMME BEFORE
THE COOK PERIOD HAS FINISHED.

Step 1 Turn the oven control to the OFFposition.

Step 2 Press and hold in the “Cook Period” button.

Step 3 With the “Cook Period” button still held in, return the display to

0.00 by pressing the “–” button.

Step 4 Release the “Cook Period” and “–” buttons and the display will

revert to the time of day and the “Auto” symbol will flash.

Step 5 Press the “Manual” button to return the oven to “Manual” operation.

The “Auto” symbol will go out.

Note 1 When cooking automatically the Cook Period can be checked at any time by

simply pressing the Cook Period button.

OTHER NOTES ON TIMER OPERATION

1. When cooking Automatically the Cook Period can be checked at any time simply by pressing the Cook

Period button.

2. When cooking Automatically the End Time can be checked at any time by simply pressing the

End Time button.

3. Having set a Cook Period and End Time an electronic device stores the information. The device within

the timer will switch the oven(s) on and off at the required times.

4. When setting an Auto Cooking Programme and a mistake is made, to clear:–

(a) Press and hold in the “Cook Period” button.
(b) With the Cook Period button still held in, return the display to by pressing the “–” button.
(c) Release the “Cook Period” & “–” buttons, and the display will revert to the time of day and the

“Auto” symbol will flash.

(d) Press & release the “Manual” button.
(e) Start the sequence again.

5. If at any time the display shows three flashing zero’s 0.00. It is likely that the electricity supply to the

oven has been interrupted. Reset the timer to the correct time of day.

Food in the oven may, therefore, not have been cooked, before serving check food is
thoroughly heated and completely cooked.

6. To set each function always press and hold the required function button and at the same time press

“+” or “–” buttons.

Note: Between the hours of 22.00 & 06.00 the display dims to prevent glare.

However, if you should operate a button during this period, the timer will return to
normal brightness for a few seconds and then dim again.

11