Candy FCP6021X User Manual [EN]

USER INSTRUCTIONS

OVENS

CANDY HOOVER GROUP S.R.L. • Via Privata Eden Fumagalli • 20047 Brugherio Milano Italy

EN

02

Safety Indications

• WARNING: the appliance and accessible parts become hot during use.
Be careful not to touch any hot parts.

• WARNING: the accessible parts can become hot when the oven is in
use. Children must be kept at a safe distance.

• WARNING: ensure that the appliance is switched off before replacing
the bulb, to avoid the possibility of electric shocks.

• WARNING: before initiating the automatic cleaning cycle:

- Clean the oven door;

- Remove large or coarse food residues from the inside of the oven using

a damp sponge. Do not use detergents;

- Remove all accessories and the sliding rack kit (where present);

- Do not place tea towels
In ovens with meat probe it is necessary, before making the cleaning

cycle, close the hole with the nut provided. Always close the hole with
the nut when the meat probe is not used.

• Children under 8 must be kept at a safe distance from the appliance if
not continuously supervised.

• Children must not play with the appliance. The appliance can be used
by those aged 8 or over and by those with limited physical, sensorial or
mental capacities, without experience or knowledge of the product,
only if supervised or provided with instruction as to the operation of the
appliance, in a safe way with awareness of the possible risks.

• Cleaning and maintenance should not be carried out by unsupervised
children.

• Do not use rough or abrasive materials or sharp metal scrapers to
clean the oven door glasses, as they can scratch the surface and cause
the glass to shatter.

• The oven must be switched off before removing the removable parts
and, after cleaning, reassemble them according the instructions.

• Only use the meat probe recommended for this oven.

• Do not use a steam cleaner for cleaning operations.

• Connect a plug to the supply cable that is able to bear the voltage,

current and load indicated on the tag and having the earth contact. The
socket must be suitable for the load indicated on the tag and must be

EN 02

having the earth contact connected and in operation. The earth
conductor is yellow-green in colour. This operation should be carried
out by a suitably qualified professional. In case of incompatibility
between the socket and the appliance plug, ask a qualified electrician to
substitute the socket with another suitable type. The plug and the
socket must be conformed to the current norms of the installation
country. Connection to the power source can also be made by placing
an omnipolar breaker between the appliance and the power source
that can bear the maximum connected load and that is in line with
current legislation. The yellow-green earth cable should not be
interrupted by the breaker. The socket or omnipolar breaker used for
the connection should be easily accessible when the appliance is
installed.

• The disconnection may be achieved by having the plug accessible or
by incorporating a switch in the fixed wiring in accordance with the
wiring rules.

• If the power cable is damaged, it must be substituted with a cable or
special bundle available from the manufacturer or by contacting the
customer service department.

• The type of power cable must be H05V2V2-F.

• Failure to comply with the above can compromise the safety of the

appliance and invalidate the guarantee.

• Any excess of spilled material should be removed before cleaning.

• During the pyrolytic cleaning process, surfaces can heat up more than

usual, children must therefore be kept at a safe distance.

• The appliance must not be installed behind a decorative door in order
to avoid overheating.

• When you place the shelf inside, make sure that the stop is directed
upwards and in the back of the cavity.

• The shelf must be inserted completely into the cavity.

•WARNING: Do not line the oven walls with aluminum foil or single-use
protection available from stores. Aluminum foil or any other protection,
in direct contact with the hot enamel, risk melting and deteriorating the
enamel of the insides.

•WARNING: Never remove the oven door seal.

EN 03

Summary

General Instructions

5

Product Description

7

Use of the Oven

8

Oven Cleaning and Maintenance

9

1.1 Safety indications

1.2 Electrical safety

1.3 Recommendations

1.4 Installation

1.5 Waste management

1.6 Conformity declaration

2.1 Overview

2.2 Accessories

2.3 First use

3.1 Display description

3.2 Using the end of cooking timer

3.3 Setting the correct time

3.4 Cooking modes

4.1 General notes on cleaning

4.2 Maintenance

• Removal of the oven window

• Removal and cleaning of the glass
door

• Changing the bulb

Troubleshooting

11

5.1 F.A.Q.

EN 04