Candy CTE 121 User Manual [EN]
EN
INTRODUCTION
Read this manual carefully as it offers practical advice to help you get the most from your
washing machine.
This Instruction Manual
contains everything you need
to know about the everyday
running of your machine.
Keep it for future reference.
An Installation and
Maintenance Manual is also
provided which you should
consult during the installation
and routine maintenance of
your washing machine. The
manual also contains
information about possible
working problems, advice
about the wash load, an
explanation of label symbols
and hints about how to remove
stubborn stains.
1.- CONTROL PANEL
2.- LID
3.- DRUM
4.- DETERGENT COMPARTMENT
5.- FILTER DOOR
6.- FILTER
When contacting a CANDY or one of its Technical Assistance Centre always refer to the model (see control panel) and the registration
and series numbers which are indicated at the bottom of the machine
under the lower panel or on the warranty certificate. That is to say,
everything that appears in the box.
Providing this information will ensure a faster and more efficient service.
3
INDEX
page
GUARANTEE.................................................................................
TECHNICAL DATA ..........................................................................
OPENING THE LID – LOADING ...................................................
DETERGENT DISPENSER ...........................................................
AUTOMATIC VARIABLE CAPACITY - FUZZY LOGIC
ELECTRONICS ..............................................................................
PROGRAMME SELECTION ..........................................................
CONTROL DESCRIPTION ..........................................................
TABLE OF PROGRAMMES .......................................................
5
6
7
8
9
9
10
13
Place the attached «program label»
in the corresponding language in the
rear slot of the panel window.
4
GUARANTEE
A
1.
The appliance comes with a guarantee certificate.
SERVIC
2.
Complete part A and keep it in a safe place. It should
be presented to the Technical Assistance Centre in
the event of a repair being necessary along with the
legal receipt issued by the dealer on purchase.
E
5
TECHNICAL DATA
CTE 121
Load capacity ........................................................................
Voltage .....................................................................................
Wash motor power rating ........................................................
Spin motor power rating ..........................................................
Electropump power rating .......................................................
Heating element power rating .................................................
Max. power input .....................................................................
Fuse ........................................................................................
Water pressure ...................................................................
Spin speed ..............................................................
Water consumption (60º C programme) ................................
Energy consumption (60º C programme)/5 kg...................
Energy efficiency rating ..............................................................
r.p.m./min
kg.
W.
W.
W.
W.
W.
MPa
lit.
kWh
V.
A.
5
230
125
400
30
1.950
2.200
10
0,05 min.
0,8 max.
1200
45
0,95
A
6
Loading...