Candy CTDF 1306, CTDF 1306E User Manual [EN]
WASHING MACHINE CTDF 1306
H V B1 C1 A
G B2 C2 p
A PROGRAMME SELECTOR
Use this control to select the desired wash programme. Turn the selector (it
can be turned in both directions) so that the programme is opposite the
reference indicator (p). The temperature selected will depend on the
programme. (See the Programme
B1 SPIN SPEED SELECTOR
Table).
B
2 DELAY START
C1 COLD WASH
2 AQUAPLUS (SENSITIVE KEY)
C
G DOOR LIGHT
H START/PAUSE KEY
the machine
V “DIGITAL” Display
The display’s indicator system allows you to be constantly informed about the status of
p CONTROL POSITION INDICATOR
Programme table mod CTDF 1306
max.
time
min.
temp.
setting
ºC
1000
1300
aprox.
programme programme for
White display 90º 1300
Fast coloureds with prewash display 60º 1300
COTTONS
MIXED
SYNTHETICS
DELICATES
SPECIAL
* Cotton wash programme requirements according to (EU) 1015/2010 e nº 1061/2010 regulations
*Fast coloureds display 60º 1300
*Fast coloureds display 40º 1300
Delicate coloureds display 30º 1300
Fast coloureds
Delicate coloureds
Delicate coloureds
Delicates display 40º 600
Woollens
Hand wash
Gentle rinse
Gentle spin
Empty
Mix&wash (M&W) display 40º 1000
Fast 44 display 40º 1000
Fast 32 display 30º 1000
display 50º 1000
display 40º 1000
display 30º 1000
display 30º 800
display 30º 800
display
display
display
spin
speed
rpm/min
washing powder
max.
load
Kg.
6
6
6
6
6
2
2
2
1,5
1
2
6
3
2
load
I II
option keys
C
60° Cotton wash programme
40° Cotton wash programme
These wash programmes are recommended for soiled cotton fabrics and are the most effective in terms of both
energy efficiency and water consumption.
These programmes have been designed to comply with the recommended wash temperatures specified on the
labelling: the specified temperature may differ slightly from that indicated on the wash cycle.
Technical data mod.
CTDF 1306
voltage
220-230V.
Mains
50Hz.
Mains fuse
Amp. rating
10 A. 0,05-0,8 Mpa 1500
Water
pressure
Power input
Max.
IMPORTANT:
Do not use liquid detergent for programs with a prewash cycle and/or timed start.
PREPARING THE WASH CYCLE
1.- Once the washing is loaded, ensure that the drum doors are properly closed..
2.- Add detergent and additives, not exceeding the maximum level indicator.
detergent for pre-wash I
detergent for wash programme II
fabric conditioner
SELECTING THE DESIRED PROGRAMMES AND OPTIONS
3.- Tu
rn the programme selector (A) to the desired programme.
4.- Press the key or keys for any options desired (C1, C2,).
.- It is advisable to select the required options before pressing the Programme Start key (H).
.- Remember that if the programme has already passed the stage at which an option is activated, that option
will not be implemented.
Loading...