8. TIPS FOR ENERGY SAVING .............................................................................. 26
9. SCRAPPING OLD APPLIANCES ....................................................................... 27
5
Thank you for purchasing this product.
Before using your refrigerator, please carefully read this instruction manual in order to
maximize its performance. Store all documentation for subsequent use or for other owners.
This product is intended solely for household use or similar applications such as:
- the kitchen area for personnel in shops, offices and other working environments
- on farms, by clientele of hotels, motels and other environments of a residential type
- at bed and breakfasts (B & B)
- for catering services and similar applications not for retail sale.
This appliance must be used only for purposes of storage of food, any other use is considered
dangerous and the manufacturer will not be responsible for any omissions. Also, it is
recommended that you take note of the warranty conditions.
1. SAFETY INFORMATION
This guide contains many important safety
information. Please, we suggest you keep
these instructions in a safe place for easy
reference and a good experience with the
appliance. The refrigerator contains a
refrigerant gas (R600a: isobutane) and
insulating gas (cyclopentane), with high
compatibility with the environment, that are,
however, inflammable.
Caution: risk of fire
If the refrigerant circuit should be damaged:
Avoid opening flames and
sources of ignition.
Thoroughly ventilate the room in which the
appliance is situated
WARNING!
Care must be taken while
cleaning/carrying the appliance to avoid
touching the condenser metal wires at the
back of the appliance, as you might injure
6
your fingers and hands or damage your
product.
This appliance is not designed for stacking
with any other appliance. Do not attempt
to sit or stand on top of your appliance as
it is not designed for such use. You could
injure yourself or damage the appliance.
Make sure that mains cable is not caught
under the appliance during and after
carrying/moving the appliance, to avoid
the mains cable becoming cut or damaged.
When positioning your appliance take care
not to damage your flooring, pipes, wall
coverings etc. Do not move the appliance
by pulling by the lid or handle. Do not
allow children to play with the appliance
or tamper with the controls. Our company
declines to accept any liability should the
instructions not be followed.
Do not install the appliance in humid, oily
or dusty places, nor expose it to direct
sunlight and to water.
Do not install the appliance near heaters
or inflammable materials.
If there is a power failure do not open the
lid. Frozen food should not be affected if
the failure lasts for less than 20 hours. If
the failure is longer, then the food should
be checked and eaten immediately or
cooked and then refrozen.
If you find that the lid of the chest freezer
is difficult to open just after you have
closed it, don’t worry. This is due to the
pressure difference which will equalize
and allow the lid to be opened normally
7
after a few minutes.
Do not connect the appliance to the
electricity supply until all packing and
transit protectors have been removed.
Leave to stand for at least 4 hours before
switching on to allow compressor oil to
settle if transported horizontally.
This freezer must only be used for its
intended purpose (i.e. storing and freezing
of edible foodstuff).
Do not store medicine or research
materials in the Wine Coolers. When the
material that requires a strict control of
storage temperatures is to be stored, it is
possible that it will deteriorate or an
uncontrolled reaction may occur that can
cause risks.
Before performing any operation, unplug
the power cord from the power socket.
On delivery, check to make sure that the
product is not damaged and that all the
parts and accessories are in perfect
condition.
If in the refrigeration system a leak is
noted, do not touch the wall outlet and do
not use open flames. Open the window
and let air into the room. Then call a
service center to ask for repair.
Do not use extension cords or adapters.
Do not excessively pull or fold the power
cord or touch the plug with wet hands.
Do not damage the plug and/or the power
cord; this could cause electrical shocks or
fires.
If the supply cord is damaged, it must be
8
replaced by the manufacturer, its service
agent or similarly qualified person in order
to avoid a hazard.
Do not place or store inflammable and
highly volatile materials such as ether,
petrol, LPG, propane gas, aerosol spray
cans, adhesives, pure alcohol, etc. These
materials may cause an explosion.
Do not use or store inflammable sprays,
such as spray paint, near the Wine
Coolers. It could cause an explosion or
fire.
Do not place objects and/or containers
filled with water on the top of the
appliance.
We do not recommend the use of
extension leads and multi-way adapters.
Do not dispose of the appliance on a fire.
Take care not to damage, the cooling
circuit/pipes of the appliance in
transportation and in use. In case of
damage do not expose the appliance to
fire, potential ignition source and
immediately ventilate the room where the
appliance is situated.
The refrigeration system positioned
behind and inside the Wine Coolers
contains refrigerant. Therefore, avoid
damaging the tubes.
Do not use electrical appliances inside the
food storage compartments of the
appliance, unless they are of the type
recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use mechanical devices or other
9
means to accelerate the defrosting
process, other than those recommended
by the manufacturer.
Do not use electrical appliances inside the
food storage compartments, unless they
are of the type recommended by the
manufacturer.
Do not touch internal cooling elements,
especially with wet hands, to avoid cracks
or injuries.
Maintain the ventilation openings in the
appliance enclosure or in the built-in
structure, free of obstruction.
Do not use pointed or sharp-edged objects
such as knives or forks to remove the
frost.
Never use hairdryers, electrical heaters or
other such electrical appliances for
defrosting.
Do not scrape with a knife or sharp object
to remove frost or ice that occurs. With
these, the refrigerant circuit can be
damaged, the spill from which can cause a
fire or damage your eyes.
Do not use mechanical devices or other
equipment to hasten the defrosting
process.
Absolutely avoid the use of open flame or
electrical equipment, such as heaters,
steam cleaners, candles, oil lamps and the
like in order to speed up the defrosting
phase.
Never use water wash the compressor
position, wipe it with a dry cloth
thoroughly after cleaning to prevent rust.
10
It is recommended to keep the plug clean,
any excessive dust residues on the plug can
be the cause fire.
The product is designed and built for
domestic household use only.
The guarantee will be void if the product is
installed or used in commercial or nonresidential domestic household premises.
The product must be correctly installed,
located and operated in accordance with
the instructions contained in the User
Instructions Booklet provided.
The guarantee is applicable only to new
products and is not transferable if the
product is resold.
Our company disclaims any liability for
incidental or consequential damages.
The guarantee does not in any way
diminish your statutory or legal rights.
Do not perform repairs on this Wine
Coolers. All interventions must be
performed solely by qualified personnel.
If you are discarding an old product with a
lock or latch fitted to the door, ensure that
it is left in a safe condition to prevent the
entrapment of children.
This appliance can be used by children
aged from 8 years and above and by
persons with reduced physical, sensory or
mental capabilities or with a lack of
experience and knowledge; provided that
they have been given adequate
supervision or instruction concerning how
to use the appliance in a safe way and
understand the hazards involved.
11
Children should not play with the
appliance. Cleaning and user maintenance
should not be made by children without
supervision.
Locks :If your Fridge/Freezer is fitted with
a lock, to prevent children being entrapped
keep the key out of reach and not in the
vicinity of the appliance. If disposing of an
old Fridge/Freezer break off any old locks
or latches as a safeguard.
Children aged from 3 to 8 years are allowed
to load and unload this appliance.
WARNING! When positioning the appliance,
ensure the supply cord is not trapped or
damaged.
WARNING! Do not locate multiple portable
socket-outlets or portable power supplies
at the rear of the appliance.
To avoid contamination of food, please
respect the following instructions
Opening the door for long periods can cause
a significant increase of the temperature in
the compartments of the appliance.
Clean regularly surfaces that can come in
contact with food and accessible drainage
systems.
Clean water tanks if they have not been
used for 48h; flush the water system
connected to a water supply if water has
not been drawn for 5 days.
Store raw meat and fish in suitable
containers in the refrigerator, so that it is
not in contact with or drip onto other food.
12
·
Two-star frozen-food compartments(if they
are presented in the appliance) are suitable
for storing pre-frozen food, storing or
making ice-cream and making ice cubes.
·
One-, two- and three -star compartments
(if they are presented in the appliance) are
not suitable for the freezing of fresh food.
·
If the appliance is left empty for long
periods, switch off, defrost, clean, dry and
leave the door open to prevent mould
developing within the appliance.
WARNING! During using, service and
disposal the appliance, please pay attention
to symbol as left side, which is located on
rear of appliance (rear panel or
compressor).
It’s risk of fire warning symbol. There are
flammable materials in refrigerant pipes
and compressor.
·
Please be far away fire source during using,
service and disposal.
FOR a freestanding appliance:
this refrigerating appliance is not intended
to be used as a built-in appliance.
ANY replacement or maintenance of the
LED lamps is intended to be made by the
manufacturer,its service agent or similar
qualified person.the energy efficiency class
of the lamp is grade G.
2. INSTALLATION
2.1
Location
When selecting a position for your unit you should make sure the floor is flat and firm, and the
room is well ventilated. Avoid locating your unit near a heat source, e.g. cooker, boiler or
radiator. Also avoid direct sunlight as it may increase the electrical consumption. Extreme cold
ambient temperatures may also cause the unit not to perform properly. This unit is not designed
for use in a garage or outdoor installation. Do not drape the unit with any covering.
13
When installing the unit, ensure that 10 cm of free space is left at both sides, 10 cm at the rear
and 30 cm at the top of the unit. This will allow cold air to circulate around the wine cooler and
improve the efficiency of the cooling process.
2.2
Door Handle Install Illumination (optional)
1) Take out the screw caps from the door handle holes.
2) Put the handles into the screw holes and then hit them to fix.
3) Cap the screw caps on the handle screws.
4) Take out the screw caps from the handle screw holes.
5) Remove the screws and take the handles down.
6) Cap the screw caps on the door handle holes again.
7) Install the handles into the door handle holes of the other side in accordance with the handle
installation instructions.
2.3
Reversing the Door Swing
1) Take off knuckle guard. 2) Take off top hinge.
3) Take off the door of refrigerating
chamber.
7) Assemble the door of freezer
chamber on the lower hinge.
14
4) Take off middle hinge with a screw
driver.
8) Assemble middle hinge
assembly to left side of the
cabinet.
5) Take off the door of freezing chamber.
9) Assemble the door of
refrigerating.
6) Take off hinge assembly with a screw
driver, Assemble lower hinge assembly
to left side of the cabinet with a screw
driver.
10) Take on knuckle guard.
15
2.4
Door Space Requirements
The unit's door must be able to open fully as shown.
W×D≥990×1025mm
2.5
Levelling the Unit
To do this adjust the two levelling feet at the front of the unit.
If the unit is not level, the door and magnetic seal alignments
will not be covered properly.
Make sure that the foot touches the ground before use.
Look down from the top, clockwise and counterclockwise loosening, tightening.
2.6
Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm
water using a 'Wrung-out' sponge or cloth. Wash the shelves and salad bin in warm soapy water
and dry completely before replacing in the unit. Clean the exterior of the unit with a damp cloth.
If you require more information, refer to the Cleaning section.
2.7
Before Using Your Unit
The refrigerator adopts 220~240V/50Hz AC power, voltage fluctuations over the range of
187~264V will cause malfunction or even damage.
Do not damage the power cord under any condition so as to ensure safety use, do not use
when the power cord is damaged or the plug is worn.
Do not put flammable, explosive, volatile and highly corrosive items in the refrigerator to prevent
damages to the product or fire accidents.
Do not place flammable items near the refrigerator to avoid fires.
This product is household refrigerators and shall be only suitable for the storage of foods.
According to national standards, household refrigerators shall not be used for other purposes,
such as storage of blood, drugs or biological products.
Do not place items such as bottled or sealed container of fluid such as bottled beers and
beverages in the freezer to prevent bursts and other losses.
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working
properly and to allow it time to fall to the correct temperature. Your unit should not be overfilled.
Do not damage the power cord under any condition so as to ensure safety use, do not use
when the power cord is damaged or the plug is worn.
Do not put flammable, explosive, volatile and highly corrosive items in the refrigerator to prevent
16
damages to the product or fire accidents.
Do not place flammable items near the refrigerator to avoid fires.
This product is household refrigerators and shall be only suitable for the storage of foods.
According to national standards, household refrigerators shall not be used for other purposes,
such as storage of blood, drugs or biological products.
Do not place items such as bottled or sealed container of fluid such as bottled beers and
beverages in the freezer to prevent bursts and other losses.
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working
properly and to allow it time to fall to the correct temperature. Your unit should not be overfilled.
♦ Before Plugging in
You must check that you have a socket which is compatible with the plug
supplied with the unit.
♦Before Turning On!
Do not turn on until two hours after moving the unit.
2.8
Interior Accessories
Various glass or plastic storage shelves are included with your appliance - different
models have different combinations.
You should always slide one of the full size glass storage shelves into the lowest set of
guides, above the fruit and vegetable containers, and keep it in this position. To do this,
pull the storage shelf forward until it can be swiveled upwards or downwards and
removed.
Please do the same in reverse to insert the shelf at a different height.
In order to make the most of the volume of the fresh food storage compartment and
frozen-food storage compartment, the user can remove one or more shelves, drawers,
out of the appliance, according to your daily use.
17
3. PRODUCT OVERVIEW
The most energy-saving configuration requires drawers, food box and shelves to be positioned in the product,
please refer to the above pictures.
*Dotted line represents the position of air outlet and return air inlet.
*All images in this instruction manual are for indication only; please refer to your individual unit for details.
18
A
fast cool
fast cool
A
4. OPERATION
4.1
Operation Instructions
Temperature control
Temperature control of fresh food storage compartment.
Key
A.SET: gear setting key.
Display screen
1
2
3
4
5
External display
Gear 1
Gear 2
Gear 3
Gear 4
Gear 5
19
(summer)
(winter)
Display
Gear 1
Gear 2
Gear 3
Gear 4
Gear 5
For the first power-on, the display screen (including the key light) will be displayed in full for 3s,
and then the gear in the middle displays the state of running.
Display of normal running
On the occurrence of a failure, the corresponding LED light will give a combined display of
failure code (loop display);
Where there is no failure, the LED light will display the current running gear of the refrigerator.
Gear setting
The gear will be changed once every time when you press the key SET. Then, the refrigerator
will run under the setting value after 15s.
Fast cool function
Enter: Circulating modulation rapid cooling mode.
Operate: Indicator of rapid cooling lights up, and the refrigerator operates at 2°C.
Exit: 1. Operate 150min under the rapid cooling mode.
2.
Temperature adjustment can exit from the rapid cooling mode.
Temperature control of freezing chamber
The freezing temperature is relatively low in “COLDER” position, while the freezing temperature is relatively high in “COLD” position, thus, “NORMAL” position is generally used.
When ambient temperature is high in summer, the temperature shall be in the range from
“NORMAL" to “COLD”. If the ambient temperature is above 35°C, then “COLD” position shall
prevail.
When ambient temperature is low in winter, the temperature shall be in the range from “NORMAL"
to “COLDER”. If the ambient temperature is below 10°C, then “COLDER” position shall prevail.
20
Water Dispenser (if available)
Attention:
1.
The water dispenser can be used only for purified water. Hot water, soft drinks
containing carbon dioxide such as cola, fruit juice, etc. are not applicable;
2.
The water injection by taking down the water box from the door is not allowed;
3.
The maximum water injection rate shall be lower than the maximum scale
indicated on the water box;
4.
In case of failure of water taking, please inspect if the water box is normally
located on its base;
5.
Please confirm that the water tank is empty before moving;
6.
The water valve components are non-detachable;
7.
If the water dispenser is used for the first time, or it has been kept unused for long
period, then it needs to be disassembled and cleaned before water taking and
drinking;
8.
If the water in the water tank is not used for long period, then it is suggested that
the water in water dispenser shall be drained and then the clean drinking water shall
be added;
9.
It is suggested that the mechanism of the water dispenser shall be cleaned once in
every 3-6 months;
10.
If the cleaning solution is used for cleaning water dispenser, then it is suggested
that, before the water taking and drinking, the water shall be drained to the amount
of 5-6 cups after the water tank is installed back, so as to avoid the residue cleaning
solution.
11.
Upon opening/closing the door, do not apply excessive force to prevent water from
overflow due to water sloshing inside the tank.
Instruction of water dispenser
Handle of water outle of
water dispenser
Water dispenser cover
Water tank cover of
water dispenser
Water tank of water
dispenser
Sealing ring
Water valve
21
Filling of drinking water:
Open the water tank cover and directly fill the water;
Attentions:
1.
Only purified water and cool water without any impurities can be used for water
dispenser. The hot water and soft drink with carbon dioxide, likes cola, apple juice
and so on cannot be used;
2.
The water injection by taking down the water box from the door is not allowed;
3.
The maximum water injection rate shall be lower than the maximum scale
indicated on the water box;
4.
Do not knock on the bottle frame in upward side during the filling of water.
Water taking and drinking:
1.
Push the handle to inner side by using the water glass;
2.
The water flows out when the handle is pushed to inner side; and the outflow stops when
the handle returns to the original place;
Attentions:
1.
If the water in the water tank is not used for long period, then it is suggested that
the water in water dispenser shall be drained and then the clean drinking water
shall be added;
22
2.
If the water dispenser is used for the first time, or it has been kept unused for long
period, then it needs to be disassembled and cleaned before water taking and
drinking;
3.
In case of failure of water taking, please inspect if the water box is normally
located on its base;
Instructions for water dispenser disassembly and cleaning
I. Disassembly
1.
Take out the water tank components
To pull out the water tank components in the direction of 45°of oblique upward by hands that
are closely attached on the two sides of the water tank components, when the lower parts of
water tank components are separated from the water valve components, the water tank
components can be taken out through horizontal movement (to the direction of user);
2.
Take down the sealing ring of water tank
23
3.
Disassembly of water valve components
Use the (screwdriver), and its tool edge shall be in alignment with and inserted in the vacancy
at the skirt border, which is bulged at the top of water valve components, then rotate the
screwdriver clockwise or anticlockwise, after the rotation, use the tool bit to open the water
valve and then pull out the water valve components in the direction of 45° of oblique upward
by hands.
Attentions:
Make sure that the water tank is empty before moving it.
1.
The water valve components are non-detachable;
II. Cleaning
1.
2.
3.
III. Installation
1.
To disassemble the water tank, water tank cover, sealing ring and water valve;
Use cold or warm water to cleaning the components of water dispenser.
Wipe it with dry cloth.
Attentions:
1.
If the cleaning solution is used for cleaning water dispenser, then it is suggested
that, before the water taking and drinking, the water shall be drained to the amount
of 5-6 cups after the water tank is installed back, so as to avoid the residue cleaning
solution.
Installation of water valve components
The guiding boss on the water valve components shall be in alignment with the guiding slot on
the base, and press it down in the direction of in the direction of 45°of oblique downward by
hands with strength, until you may hear the sound of “lick”.
2.
Installation of water tank sealing ring
To install the sealing ring on the bottom of water tank by hand, make sure that it is properly
installed, and the wrinkling and oblique installation and so on shall be avoided.
24
3.
Installation of water tank components
The hanging slot on the water tank components shall be in alignment with the suspension loop
on the inner layer, and the sealing ring at the bottom of water tank shall be in alignment with
the entrance of water value components, and then insert them into the corresponding positions
in the direction of 45° of oblique downward by hands.
Cleaning of water receiving tank
Use wet cloth to wipe it and then use the dry cloth.
4.2
Noise Inside the Unit!
You may notice that your unit makes some unusual noises. Most of these are perfectly normal,
but you should be aware of them!
These noises are caused by the circulation of the refrigerant liquid in the cooling system. It has
become more pronounced since the introduction of CFC free gases. This is not a fault and will
not affect the performance of your unit. This is the compressor motor working, as it pumps the
refrigerant around the system.
4.3
Tips for Keeping Food in the Unit
♦
Cooked meats/fishes should always be stored on a shelf above raw meats/fishes to avoid
bacterial transfer. Keep raw meats/fishes in a container which is large enough to collect juices
and cover it properly. Place the container on the lowest shelf.
♦
Leave space around your food, to allow air to circulate inside the unit. Ensure all parts of the
unit are kept cool.
♦
To prevent transfer of favours and drying out, pack or cover the food separately. Fruit and
vegetables do not need to be wrapped.
♦
Always let pre-cooked food cool down before you put in the unit. This will help to maintain the
internal temperature of the unit.
♦
To prevent cold air escaping from the unit, try to limit the number of times you open the door.
We recommend that you only open the door when you need to put food in or take food out.
4.4
Change the Light Bulb
Lamp replacement by professionals
25
5. CLEANING
5.1
Defrosting
Auto-defrost for Frost-free Refrigerator
5.2
Cleaning the Interior and the Exterior of the Unit
♦
Remove all the shelves and the salad bin. To remove the salad bin first remove the lower door
shelf.
♦
Wipe the inside of the unit with a weak solution of bicarbonate soda and then rinse with warm
water using a “wrung-out” sponge or cloth. Wipe completely dry before replacing the shelves
and salad bin.
♦
Use a damp cloth to clean the exterior, and then wipe with a standard furniture polish. Make
sure that the door is closed to avoid the polish getting on the magnetic door seal or inside the
unit.
♦
The grille of the condenser at the back of the unit and the adjacent components can be
vacuumed using a soft brush attachment.
5.3
Cleaning Tips
Condensation may appear on the outside of the unit. This may be due to a change in room
temperature. Wipe of any moisture residue. If the problem continues, please contact a qualified
technician for assistance.
6. MAINTENANCE
6.1
Changing the Internal Light
Lamp replacement by professionals.
6.2
Care When Handling / Moving Your Unit
Hold the unit around its sides or base when moving it. Under no circumstances should it be lifted
by holding the edges of the top surface.
6.3
Servicing
The unit should be serviced by an authorized engineer and only genuine spare parts should be
used. Under no circumstances should you attempt to repair the unit yourself. Repairs carried out
by inexperienced persons may cause injury or serious malfunction. Contact a qualitatively
technician.
6.4
Switching Off for Long Periods of Time
When the unit is not in use for a long period of time, disconnect it from the mains supply, empty
all food and clean the appliance, leaving the door ajar to prevent unpleasant smells.
6.5
Do not shield positions of air outlet and return air inlet of the refrigerator
6.6
Do not keep foods of higher temperature close to temperature sensor
6.7
Take out drawer of freezing chamber of refrigerator and put foods directly on
the glass partition
26
7. TROUBLE SHOOTING
Inoperation
Whether the freezer is plugged and connected to power;
Low voltage;
Failure power or tripping circuit
Odor
Odorous foods should closely wrapped; Whether foods are
rotten;
Whether the interior shall be cleaned.
Long-term operation of
compressor
It is normal that refrigerator operates for longer time in
summer when the ambient temperature is higher;
Do not put too much food in the freezer at one time;
Do not put foods until they are cooled;
Frequent opening of refrigerator door.
Illuminating light does not
shine
Whether the refrigerator is connected to power, whether the
illuminating light is damaged.
The refrigerator door can not
be properly closed.
The freezer door is stuck by food packages; Too much food;
Tilt refrigerator.
Loud noises
Whether the food is leveled, whether the refrigerator is
balanced;
Whether the refrigerator parts are properly placed.
The following simple issues can be handled by the user. Please call the after-sale service
department if the issues are not settled.
7.1
Warm tips:
♦
The refrigerator enclosure may emit heat during operation specially in summer, this is
caused by the radiation of the condenser, and it is a normal phenomenon.
♦
Condensation: condensation phenomenon will be detected on the exterior surface and door
seals of the freezer when the ambient humidity is large, this is a normal phenomenon, and the
condensation can be wiped away with a dry towel.
♦
Buzz: Buzz will be generated by running compressor specially when starting up or shutting
down.
8. TIPS FOR ENERGY SAVING
For better energy saving we suggest :
Installing tge appliance away from heat sources and not exposed to direct sunlight and in a well
ventilated roo.
Avoid putting hot food into the refrigerator to avoid increasing the internal temperature and
therefore causing continuos functionaliting of the compressor.
Do not excessively stuff foods so as to ensure proper air circulation.
Defrost the appliance in case there is ice to facilitate the transfer of cold.
In case of absence of electrical energy, it is advisable to keep the refrigerator door closed.
Open or keep the doors of the appliance open as little as possible
Avoid adjusting the setting to temperatures too cold.
Remove dust present on the rear of the appliance
27
Warning for energy
1) Refrigerating appliances might not operate consistently (possibility of defrosting of contents or temperature
becoming too warm in the frozen food compartment) when sited for an extended period of time below the
cold end of therange of temperatures for which the refrigerating appliance is designed.
2) The fact that effervescent drinks should not be stored in food freezer compartments or cabinets or in low-
temperature compartments or cabinets, and that some products such as water ices should not be
consumed too cold;
3) The need to not exceed the storage time(s) recommended by the food manufacturers for any kind of food
and particularly for commercially quick-frozen food in food-freezer and frozen-food storage compartments
or cabinets;
4) The precautions necessary to prevent an undue rise in the temperature of the frozen food while defrosting
the refrigerating appliance, such as wrapping the frozen food in several layers of newspaper.
5) The fact that a rise in temperature of the frozen food during manual defrosting, maintenance or cleaning
could shorten the storage life.
6) The necessity that, for doors or lids fitted with locks and keys, the keys be kept out of the reach of children
and not in the vicinity of the refrigerating appliance, in order to prevent children from being locked inside.
7)Opening the door for long periods can cause a significant increase of the temperature in the compartments
of the appliance.
8) Clean regularly surfaces that can come in contact with food and accessible drainage systems.
9) Clean water tanks if they have not been used for 48 h; flush the water system connected to a water supply
if water has not been drawn for 5 days.
10) Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip
onto other food.
11) If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the
door open to prevent mould developing within the appliance.
9.SCRAPPING OLD APPLIANCES
This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE).
WEEE contains both polluting substances (which can cause negative consequences for the environment)
and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments,
in order to remove and dispose properly all pollutants, and recover and recycle all materials.
Individuals can play an important role in ensuring that WEEE does not become an environmental issue; it is
essential to follow some basic rules:
- WEEE should not be treated as household waste;
- WEEE should be handed over to the relevant collection points managed by the municipality or by
registered companies. In many countries, for large WEEE, home collection could be present.
In many countries, when you buy a new appliance, the old one may be returned to the retailer who has to
collect it free of charge on a one-to-one basis, as long as the equipment is of equivalent type and has the
same functions as the supplied equipment.
Conformity
By placing the mark on this product, we are confirming compliance to all relevant
European safety, health and environmental requirements which are applicable in legislation for
this product.
28
Italiano
Indice
INFORMAZIONI DI SICUREZZA ......................................................................... 29
SMALTIMENTO DEI VECCHI ELETTRODOMESTICI ......................................... 48
29
Grazie per aver acquistato questo prodotto.
Prima di utilizzare il frigorifero, leggere attentamente questo manuale di istruzioni per ottimizzare il
rendimento dell'elettrodomestico. Conservare tutta la documentazione per future consultazioni o
per altri proprietari. Questo prodotto è destinato esclusivamente all'uso domestico o applicazioni
simili, come:
-
zone cucina per il personale di negozi, uffici e altri ambienti lavorativi,
-
aziende agricole, clienti di hotel e motel e altri ambienti residenziali,
-
ad es. Bed and Breakfast (B&B),
-
servizi di catering e altri usi diversi dalla vendita al dettaglio.
Questo elettrodomestico deve essere utilizzato esclusivamente per la conservazione di alimenti.
Altri utilizzi sono pericolosi e il produttore in questi casi non sarà responsabile. Si raccomanda di
consultare le condizioni della garanzia. Per un funzionamento senza problemi e per ottimizzare
il rendimento dell'elettrodomestico, leggere attentamente queste istruzioni. Il mancato rispetto
delle istruzioni fornite potrebbe annullare il diritto all'assistenza gratuita durante il periodo di
garanzia.
1.INFORMAZIONI DI SICUREZZA
Questa guida contiene numerose informazioni
importanti per la sicurezza. Conservare queste
istruzioni in un luogo sicuro per una facile
consultazione durante l'uso dell'elettrodomestico.
Il frigorifero contiene un gas refrigerante (isobutano,
R600a) e un gas isolante (ciclopentano); entrambi i gas
sono altamente compatibili con l'ambiente ma sono
infiammabili.
Attenzione: rischio di incendio
Se il circuito di refrigerazione è visibilmente danneggiato:
evitare la vicinanza con fiamme libere e fonti
di ignizione.
Ventilare accuratamente l'ambiente in cui è installato
l'elettrodomestico
AVVERTENZA!
Durate le operazioni di pulizia o trasporto
dell'elettrodomestico, fare attenzione a non toccare
i cavi metallici del condensatore sul retro
30
dell'elettrodomestico per evitare di ferirsi le dita
e le mani o di danneggiare il prodotto.
Questo elettrodomestico non può essere impilato
con altri elettrodomestici. Non sedersi né salire
sull'elettrodomestico. Non è progettato per simili
utilizzi. Ci si potrebbe ferire o l'elettrodomestico
potrebbe danneggiarsi.
Accertarsi che il cavo di alimentazione non resti
impigliato sotto l'apparecchiatura per evitare che
si laceri o si danneggi.
Quando l'elettrodomestico viene posizionato,
fare attenzione a non danneggiare il pavimento,
i tubi, il rivestimento delle pareti ecc. Non spostare
l'elettrodomestico tirandolo per il coperchio o per
la maniglia. Non consentire ai bambini di giocare
con l'apparecchio o manomettere i controlli.
In caso di inosservanza delle istruzioni,
l'azienda declina qualunque responsabilità.
Non installare l'elettrodomestico in luoghi umidi,
unti o polverosi, e non esporlo all'acqua e alla luce
solare diretta.
Non installare l'elettrodomestico accanto a caloriferi
o materiali infiammabili.
In caso di interruzione della corrente, non aprire
il coperchio. Se il blackout non supera le 20 ore,
gli alimenti congelati non dovrebbero subire
alterazioni. Se l'interruzione della corrente dura di più,
controllare il cibo e consumarlo immediatamente
o ricongelarlo solo dopo averlo cotto.
Se il coperchio del congelatore orizzontale non
si riapre facilmente subito dopo che è stato chiuso,
non si tratta di un problema, in quanto tale
condizione dipende dalla differenza di pressione
che si bilancerà entro pochi minuti consentendo
nuovamente l'apertura del coperchio.
Collegare l'elettrodomestico all'alimentazione
elettrica solo dopo aver tolto l'imballo e le protezioni
per il trasporto.
Loading...
+ 290 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.