Camden Door Controls CV-TAC4EL, CV-TAC4WC, CV-TACIP-5HT, CV-TACIP-GAM, CV-TACIP-TR2 Quick Start Guide

Quick Start Guide

Camden TAC IP 100
Series Entry System

© 2018 Camden Door Controls

About This Manual

The Quick start guide is intended for installers and service technicians. After reading this manual, you will
be able to install, register and place a test call with your TAC IP 100.

For programming the VOIP Tele-Entry System access and elevator control features, you must read the
owner’s manual, which contained more detailed instruction on installing your VOIP Tele-Entry System.

Contact Us

Camden Door Controls

5502 Timberlea Blvd

Mississauga, ON L4W 2T7

Telephone: [phone]

http://www.camdencontrols.com

Vistadial

Telephone: [phone]

www.vistadial.com

Technical Support Hours:

| Quick Start Guide | Camden TAC IP 100 Series Entry System

1

Technical support is provided from 9:00 AM until 5:00 PM, Eastern Standard Time, Monday to Friday,
excluding holidays.

“Camden” and the Camden logo are registered trademarks of Camden Door Controls, Canadian patent
numbers and other worldwide patents issued and pending. U.S. patent numbers and other worldwide
patents issued and pending.

©2018 Camden Door Controls. All rights reserved. This document should not be construed as a commitment
on the part of Camden. The information it contains is subject to change without notice. Camden assumes
no responsibility for errors that may appear within this document.

Quick Start Guide

These instructions are intended to accommodate immediate use of the TAC IP 100. However, it is important to
read this owner’s manual before attempting more extensive use. This owner’s manual contains information
about features that enhance operation and performance, as well as important safety, installation, and
operation instructions designed to prevent personal injuries as well as product damage.

Unpacking the TAC IP 100

The TAC IP 100 requires special care during installation to ensure optimal performance. Pay attention to the
bulleted items that appear in this section and to other precautions that appear throughout this manual.

• Do save all packing materials for possible future shipping needs.

• Do inspect the TAC IP 100 for signs of damage during shipment. If damage is discovered, contact place
of purchase for assistance in claims.

• Do locate and inspect the “PACKING SLIP” to determine if the product supplied for your intended
application is appropriate and that you have all the parts listed in the PACKING SLIP. Ensure the model

2

| Quick Start Guide | Camden TAC IP 100 Series Entry System

received is for the correct application (indoor or outdoor application). If not, contact place of purchase
for assistance.

• Do locate and remove the accessory box from the carton. Make sure it contains all the items listed in
the “PACKING SLIP”. If not, contact place of purchase for assistance.

Installation Considerations

• Do install the TAC IP 100 after all major construction is complete.

• Do install the TAC IP 100 within 100 meters or 330 feet of an Ethernet Switch.

• Do select a dry, well-ventilated location out of direct sunlight.

• Do refer to Dimensions (see Installation Section) for assistance with custom installations.

• Do not expose the TAC IP 100 to elevated temperatures, humidity, steam, smoke,
dampness, or excessive dust. Avoid installing the TAC IP 100 near radiators and other
heat-producing appliances.

For more installation information, see the installation section.

Note
In new construction projects, it is highly recommended to mount the trim ring during construction and then

to mount the TAC IP 100 in the nishing stages. This not only protects the TAC IP 100 from dust, chemical

treatments to the building (highly corrosive) and Vandalism, it also ensures the trim ring will be accounted

for when the developer pours concrete or builds a frame to support the VOIP Tele-Entry System.

Note

Damage caused by exposure to concrete dust, pressure spraying or applied chemicals to the building fascia
VOIDS your warranty.