Camden Door Controls CM-RQE70, CM-RQE70A, CM-RQE70ABK, CM-RQE70BK, CM-RQEPK Specsheet

DOOR ACTIVATION
DEVICES

UL 294 and ULC-S319
Standards for Access Control

SPECIAL PURPOSE SWITCHES

CM-RQE70A

PIR ‘REQUEST TO EXIT’ DETECTORS

FEATURES

CM-RQE70

CM-RQE70BK

CM-RQE70

(Shown with CM-RQEPW

adaptor plate)

• COMPACT SIZE, DESIGNED TO MOUNT
ON DOOR FRAMES

• EASY TO USE ON-BOARD PROGRAMMING
BUTTONS. NO DIP SWITCHES

➢• (4) FACTORY DEFAULT OPERATING

MODES, WITH THE ABILITY TO
CUSTOMIZE MODE ATTRIBUTES

• PLUG-IN WIRING HARNESS, MAKES
INSTALLATION EASY AND FAST

• SELECTABLE FAIL SAFE/FAIL SECURE

• (2) FORM ‘C’ CONTACTS

• MOMENTARY AND LATCHING RELAY
MODES

• SECONDARY ACTIVATION DEVICE INPUT

• CARD/KEYPAD INPUT

• DOOR POSITION SWITCH INPUT

• REQUEST TO EXIT INPUT

• BUILT-IN SOUNDER (ADJUSTABLE)

• TAMPER SWITCH

DESCRIPTION

Camden Door Controls, CM-RQE70 PIR 'REQUEST TO EXIT' DETECTORS provide the
latest word in design, with a complete list of “high performance” features, including
secondary activation device input, door monitoring, two relay outputs, and tamper
alarm. Many new programming, installation, and set-up features that have never
previously been available. Camden started by making the CM-RQE70 smaller, so it
can easily fit on door frames, and then made installing the detector faster and
easier. CM-RQE70 comes with 4 factory default operating modes that can be selected
with simple push buttons on the circuit board. Have an unusual installation and
need custom settings? No problem, you can use the on-board push buttons to
customize the default operating modes or program your own custom operating
mode. Camden also makes detector mounting and wiring easier with a simple plug-in
wiring harness. CM-RQE70 isn’t just a new REX detector, it’s a whole new approach
to REX detector design!

ARCHITECTS /ENGINEERS SPECIFICATIONS

PIR Request To Exit (REX) detectors shall be UL and ULC listed Camden Door Control
model CM-RQE70, providing horizontal and vertical sensor adjustment, adjustable
range sensitivity, (2) Form ‘C’ relay outputs, inputs for Card or keypad, door position,
request to exit switch and shall be powered 12/24V DC. The REX detector shall not
have a height exceeding 1 3/4” (43 mm), so that it may be mounted on the door
frame, if required. The REX detector shall have (4) factory default operating modes,
including door prop alarm and secondary device activation, with field selection via
on-board push buttons.

5502 Timberlea Blvd. Mississauga, ON Canada L4W 2T7 • Toll Free: 1 877 226-3369 (CAMDEN9)
Tel: [phone] • Fax: [phone] • E-mail: [e-mail] • www.camdencontrols.com

ACCESSORIES KEYPADS SPECIAL PURPOSE SWITCHES HANDS-FREE SWITCHES RF CONTROLS MOUNTING OPTIONS PUSH BUTTONS KEY SWITCHES

PIR 'REQUEST TO EXIT' DETECTOR

SELECTABLE OPERATING MODES

Camden CM-RQE70 Series REX detectors offer 4 factory default operating modes,
selected by programming buttons on the circuit board.

MODE 1: LATCHED REX SENSOR: RELAY ACTIVATED, HELD BY TIMER.

MODE 2: DOOR PROP ALARM: DETECTOR WILL ALARM IF HELD OPEN.

MODE 3: ACCESS CONTROL: DETECTOR CONTROLLED BY SYSTEM OR SECURE DEVICE.

MODE 4: CUSTOM SETTINGS: INSTALLER CAN PROGRAM ALARM PARAMETERS.

3 ¼”

(84mm)

40-42C023

SPECIFICATIONS

VOLTAGE: 12 /24V DC OPERATION

CURRENT DRAW: 50MA (MAX)

RELAYS: (2) FORM ‘C’ (DPDT)

CONTACT RATING: 3A @ 30VDC

PROGRAMMING: ON-BOARD PUSH BUTTONS AND STATUS LED

MODES: (4) FACTORY DEFAULT, (1) FULLY CUSTOM, SELECTABLE FAIL

SAFE/FAIL SECURE

COVERAGE: - MAX. 10’ W X 10’ H

- HORIZONTAL & VERTICAL ADJUSTMENT (MECHANICAL)

- SENSOR SENSITIVITY/RANGE (ELECTRONIC)

TIME DELAY: ADJUSTABLE, 5, 15, 30, 45 & 60 SECOND

SOUNDER: ON/OFF, WITH ADJUSTABLE VOLUME

PIEZO BUZZER: 92DB.@ 10CM.

INDICATOR: ACTIVATION LED

CARD OR KEYPAD INPUT: (1) N/O

DOOR POSITION
SWITCH INPUT: (1) N/O

REQUEST TO EXIT INPUT: (1) N/O

TAMPER SWITCH
CONTACT RATING: 50MA @ 12VDC

TEMP OPERATING RANGE: 32°F-120°F (0-50°C)

HUMIDITY RANGE: 0- 93% NON-CONDENSING

DIMENSIONS: 1 3/4”H X 7”W X 1 3/4”D (43mm x 176mm x 43mm)

WEIGHT: 0.25 LBS. (0.12KG.)

COLORS: WHITE OR BLACK MODELS

ORDERING INFORMATION

3” (75mm)

(176mm)

7”

1¾”

(43mm)

1¾”

(43mm)

1¾”

(43mm)

SIDE VIEW

UL 294 ACCESS CONTROL
PERFORMANCE LEVELS

1) ACCESS CONTROLS, DESTRUCTIVE
ATTACK - LEVEL I (NO ATTACK)

2) LINE SECURITY - LEVEL I
(NO LINE SECURITY)

3) ENDURANCE - LEVEL IV
(100,000 CYCLES)

4) STANDBY POWER - LEVEL I
(NO STAND BY POWER)

CM-RQE70

FRONT VIEW

CM-RQE70: PIR ‘REQUEST TO EXIT’ DETECTOR, WHITE, W/ WIRING HARNESS,
WHITE 12/24 VDC

CM-RQE70A: PIR ‘REQUEST TO EXIT’ DETECTOR, WHITE, W/ WIRING TERMINAL,
WHITE 12/24 VDC

CM-RQE70BK: PIR ‘REQUEST TO EXIT’ DETECTOR, BLACK, W/ WIRING HARNESS,
BLACK 12/24 VDC

CM-RQE70ABK: PIR ‘REQUEST TO EXIT’ DETECTOR, BLACK, W/ WIRING TERMINAL,
BLACK 12/24 VDC

CM-RQEPW: SINGLE GANG ADAPTOR PLATE (WHITE)

CM-RQEPK: SINGLE GANG ADAPTOR PLATE (BLACK)

5502 Timberlea Blvd. Mississauga, ON Canada L4W 2T7 • Toll Free: 1 877 226-3369 (CAMDEN9)

Tel: [phone] • Fax: [phone] • E-mail: [e-mail] • www.camdencontrols.com

MKTG-LIT-SP-RQE70-R2