Camco Q-Power 10 User Manual
Q - P O W E R
S E R I E S
Q-POWER SERIES USER MANUAL
P. 1
USER MANUAL
Q - P O W E R S E R I ES
INFORMATION FOR USE FOR MODELS
Q-POWER 6 and Q-POWER 10
QUM_GB_2008-R3_04-2008
© Copyright 2008 by CAMCO Produktions- und Vertriebs-GmbH
für Beschallungs- und Beleuchtungsanlagen
Fischpicke 5, D-57482 Wenden, Germany
Telephone +49 (0) 2762 408-0
Q - P O W E R
S E R I E S
IMPORTANT SAFETY INSTRUCTIONS
1) Read the information for use (user manual).
2) Please keep this user manual in a safe place during the lifetime of the amplifier. The user manual forms an integral part of the amplifier. Reselling of the
amplifier is only possible if the user manual is available. Any changes made to
the amplifier have to be documented in writing and passed on to the buyer in
the event of resale.
Q - P O W E R
S E R I E S
The amplifier may only be used in accordance with the information provided
10)
in the user manual. Before and during the usage of the amplifier please ensure
that all recommendations, especially the safety recommendations as detailed in
the user manual, are adhered to.
The Q-POWER Amplifier is designed for the amplification of pulsed audio signals
and the amplifier should only be connected to speakers with an average impedance as indicated.
IMPORTANT SAFETY INSTRUCTIONS
USER MANUAL
P. 2
Q - P O W E R S E R I ES
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this amplifier near water (for example, in damp rooms or near a
swimming pool).
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the user
manual.
8) Do not install near any heat sources such as radiators, heat registers, stoves or
other apparatus that produce heat.
9) Protect the power cord from being walked on, pinched or damaged in any
other way. Pay particular attention to plugs and the point where they exit from
the amplifier.
11) Do not place this amplifier on an unstable cart, stand,
tripod, bracket or table. The device may fall, causing
serious injury and serious damage to the device itself.
12) The amplifier can only be disconnected from the power supply by removing
the plug which must be freely accessible at all times. Unplug this amplifier
during lightning storms or when unused for long periods of time.
13)
Refer all servicing to qualified service personnel.
Servicing is required when
the power-supply cord or plug has been damaged,
liquid has been spilled or objects have fallen into the amplifier,
the amplifier has been exposed to rain or moisture,
the amplifier has been dropped or suffered damage in any other way,
the amplifier exhibits a distinct change from its normal function or
performance.
Q - P O W E R
S E R I ES
CAUTION – HIGH VOLTAGE HAZARDS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING FLASH WITH ARROW HEAD SYMBOL IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF UNINSULATED DANGEROUS
VOLTAGE WITHIN THE PRODUCT’S ENCLOSURE.
THE EXCLAMATION MARK IS INTENDED TO ALERT THE USER
TO IMPORTANT INSTRUCTIONS ALSO FOR MAINTENANCE IN THE
LITERATURE ACCOMPANYING THE AMPLIFIER.
THE LIGHTNING FLASH WITH ARROW HEAD SYMBOL ALERTS
THE USER TO DANGEROUSLY HIGH VOLTAGE AT THE SPEAKON
CONNECTORS THAT COULD POTENTIALLY BE LIFE THREATENING.
CAUTION – RISK OF ELECTRIC SHOCK – DO NOT OPEN.
EXIST WITHIN THIS PRODUCT.
REFER ALL SERVICING TO
AUTHORISED PERSONNEL.
1. Read the information for use (user manual)
When shipping the Q-POWER amplifier always use the original shipping carton
and packing materials. For maximum protection repack the unit as it was originally packed at the factory.
2. Environments
Use this amplifier only in E1, E2, E3, E4 or E5 environments according to EN55103-2
“Electromagnetic compatibility – Product family standard for audio, video and
audio-visual and entertainment lighting control apparatus for professional use
– Part 2: Immunity”
3. Ventilation
Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the amplifier and to protect it from overheating. These openings must not be blocked or covered. This amplifier should not be installed
unless proper ventilation is provided or manufacturer’s instructions have been
adhered to.
4. Water and Moisture
Do not use this amplifier near water (for example in damp rooms or near a
swimming pool).
EXPLANATION OF SYMBOLS / SAFETY
5. Cleaning
WARNING – TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
AMPLIFIER TO RAIN OR MOISTURE.
THE AMPLIFIER MAY ONLY BE CONNECTED
TO A SOCKET WITH A PROTECTIVE EARTH CONDUCTOR.
Unplug this amplifier from the wall outlet before cleaning. Do not use liquid
or aerosol cleaners.
6. Power-cord Protection
Power-supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon them or against them, paying particular
attention to cords and plugs and the point where they exit from the amplifier.
P. 3
USER MANUAL
Q - P O W E R S E R I ES
Q - P O W E R
S E R I ES
7. Lightning
For added protection of this amplifier during lightning storms or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the amplifier due to lightning and power-line
SAFETY
surges. Disconnection from the mains power supply can only be achieved by
removing the plug from the mains socket and by external disconnecting all
poles from the mains.
8. Interference of external objects and/or liquids with the appliance
Never push objects of any kind into this amplifier through openings as they may
touch dangerous voltage points or short out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the amplifier.
9. Accessories
Do not place this amplifier on an unstable cart, stand, tripod, bracket or table.
The amplifier may fall, causing serious injury and serious damage to the product.
Any mounting of the amplifier should follow the manufacturers instructions and
should use a mounting accessory recommended by the manufacturer.
10. Connecting
When you connect the amplifier to other equipment turn off the power and
unplug all of the equipment from the supply source. Failure to do so may cause
an electric shock and serious personal injury. Read the user manual of the other
equipment carefully and follow the instructions when making the connections.
11. Sound Volume
Reduce the volume to minimum before you turn on the amplifier to prevent
sudden high levels of noise which may cause hearing or speaker damage.
(See also section 4.2.1 Volume control)
12. Damages that require service
Unplug this amplifier from the mains supply and refer to your dealer/distributor
or other authorised repair workshop if any of the following situations occur:
if liquid has been spilled or objects have fallen into the amplifier
if the amplifier does not operate normally as described in the user manual,
operate the controls only as described in the user manual
if the amplifier has been dropped or damaged in any other way
when the amplifier exhibits a distinct change from its normal function or
performance
13. Servicing
Do not attempt to service this amplifier yourself. As opening or removing covers
may expose you to dangerous voltage or other hazards, the amplifier may only
be opened by qualified personnel. Please refer to your dealer/distributor.
14. Servicing and Replacement Parts
All service and repair work must be carried out by a CAMCO authorised dealer.
When replacement parts are required, please ensure that the dealer/distributor
only uses replacement parts specified by the manufacturer. The use of unauthorized replacement parts may result in injury and/or damage through fire
or electric shock or other electricity-related hazards.
15. Safety Check
Upon completion of any service or repairs to this product, ask the dealer/
distributor to perform safety checks to determine that the amplifier is in proper
operating condition.
Recommendations on how to carry out the safety test can be found in
DIN VDE 0701-1 “Maintenance, Modification and Test of Electronic Appliances“.
P. 4
USER MANUAL
Q - P O W E R S E R I ES
Q - P O W E R
EC Declaration of Conformity in accordance to EC Directives:
electro-magnetic compatibility (Council Directive 2004/108/EC);
low-voltage electrical equipment (Council Directive 73/23/EEC )
Manufacturers Name:
CAMCO Produktions- und Vertriebs-GmbH
für Beschallungs- und Beleuchtungsanlagen
Manufacturers Address:
Fischpicke 5, D-57482 Wenden, Germany
Declares that the product with the model name:
CAMCO Power amplifier Q - P O W E R 6 and Q - P O W E R 10
Conforms to the following standards:
EN60065 Safety
EN55103-1 Emission
EN55103-2 Immunity
S E R I ES
EC DECLARATION OF CONFORMITY
P. 5
USER MANUAL
Q - P O W E R S E R I ES
The operating conditions and application environments presupposed in the
information for use (user manual) are to be kept accordingly.
Wenden, 15.12.2007
Joachim Stöcker
CONTENTS
P. 6
P. 2
IMPORTANT SAFETY INSTRUCTIONS
P. 3
EXPLANATION OF SYMBOLS / SAFETY
P. 5
EC DECLARATION OF CONFORMITY
P. 6
CONTENTS
P. 7
1 WELCOME
1.1 Welcome to CAMCO
1.2 Unpacking
P. 8
1.3 The Amplifier
2 FACILITIES
2.1 Q-POWER – The Front
P. 9
2.2 Q-POWER – The Rear
2.3 Factory Settings
P. 10
3 INSTALLATION
P. 11
3.1 Mains Supply
3.2 On/Off Switch
3.3 Mounting
P. 12
3.4 Cooling
P. 13
3.5 Wiring
3.5.1 Input Connectors
3.5.2 Output Connectors
4 OPERATION
P. 15
4.1 Indicators
4.1.1 On LEDs
4.1.2 Signal / Protect LEDs (multifunctional)
4.1.3 I-Out LEDs
4.1.4 Clip LEDs
4.2 Controls
P. 16
4.2.1 Volume Control
4.2.2 Gain selector
4.2.3 Limiter Switch
4.3 Power Amp Protection Systems
4.3.1 Clip Limiter
USER MANUAL
Q - P O W E R S E R I ES
4.3.2 SOA Protection
4.3.3 DC Protection
4.3.4 DC Servo
4.3.5 Over Current Protection
4.3.6 Thermal Protection
4.4 Mains Protections
P. 17
4.4.1 Inrush Current Limitation
4.4.2 Mains Over Voltage Detection
4.4.3 Mains Failure Detection
4.4.4 Fuse Protection
4.5 Main SMPS Protections
4.5.1 Over Current Protection
4.5.2 Thermal Protection
4.6 Fans
4.7 Filter Cleaning
P. 18
4.8 Mounting the Volume Control Security Cover
P. 19
5 TROUBLESHOOTING
P. 20
5.1 Problem: No Sound
5.2 Problem: Distorted Sound
5.3 Problem: Hiss
5.4 Problem: Squeals and Feedback
6 SPECIFICATIONS
P. 22
7 MEASUREMENTS
P. 24
8 WARRANTY INFORMATION
P. 27
8.1 Summary Of Warranty
8.2 Items Excluded From This Warranty
8.3 What CAMCO Will Do
8.4 How To Obtain Warranty Service
8.5 CAMCO’s Product Improvement
9 SERVICE INFORMATION
P. 28
P. 29
10 MAINTENANCE INFORMATION / 11 DECOMISSIONING
COMPANY INFORMATION
P. 30
Q - P O W E R
S E R I ES
Q - P O W E R
S E R I ES
1.1 Welcome to CAMCO
Established in 1983, CAMCO has gained worldwide experience with professional
sound reinforcement technology. Within the audio market CAMCO specialises
in the production and marketing of high quality power amplifiers and sound
systems for use both on tour and in fixed installations.
The success of the LA, DL, DX, VORTEX and TECTON series of power amps has
1 WELCOME
made the CAMCO name synonymous with professional quality, high performance and utterly reliable power amps.
CAMCO’s commitment to research and development, seen not just in the area
of materials and technology but also most importantly in its highly skilled and
motivated workforce, is one of the keys to its ongoing success.
With its all-new Q-POWER amp series, CAMCO is pioneering a new dimension
in professional power amp construction. The seamless combination of groundbreaking technology with proven safety elements is the hallmark of the new
series.
Welcome to the new world of professional power amplifiers –
WELCOME TO CAMCO!
1.2 Unpacking
Please unpack and inspect your new amplifier for any damage that may have
occurred during transit. If damage is found, notify the transportation company
immediately. Only you the consignee may initiate a claim for shipping damage.
CAMCO will be happy to cooperate fully as needed. Please save the shipping
carton as evidence of damage for the shipper’s inspection.
Even if the amplifier has arrived in perfect condition, save all packing materials
so you will have them if you ever need to transport the unit.
NEVER SHIP THE AMPLIFIER WITHOUT THE ORIGINAL
PACKING MATERIALS.
When shipping the Q-POWER amplifier, always use the original shipping carton
and packing materials. For maximum protection, repack the unit as it was originally packed at the factory.
P. 7
USER MANUAL
Q - P O W E R S E R I ES
1.3 The Amplifier
The Q-POWER-series amplifiers offer a power output of:
Q-POWER 6 1,5 kW peak per channel @ 4 Ω,
using a Bipolar class H (2-step) high efficiency power amplifier output stage
Q - P O W E R
S E R I ES
The Q-POWER-series amplifiers are fitted with dual voltage Switched Mode
Power Supplies (SMPS), which significantly reduce the weight and size
(only 2U) of the amplifiers. Using SMPS, the symmetrical supply voltages of the
power amplifier are more stable than the power supplies used in conventional
amplifiers.
1 WELCOME / 2 FACILITIES
P. 8
Q-POWER 10 2,5 kW peak per channel @ 4 Ω,
using a MOSFET class D high efficiency power amplifier output
stage
2 Facilities
2.1 Q-POWER – The Front
1 Clip LEDs
2 I-Out LEDs
3 Signal LEDs
4 On LEDs
USER MANUAL
Q - P O W E R S E R I ES
1
2
6
5 9
12
3
7 8
4
5 Volume Control Channel A
6 Volume Control Channel B
7 Volume Control Channel C
8 Volume Control Channel D
The dual-voltage feature of the Q-POWER amplifiers senses the mains before
startup and automatically sets the SMPS to the appropriate voltage (120 V or
230 V ). No manual voltage setting will be necessar y.
10
9 Cooling Air Inlet Vents
10 Removable Air Filter System
11 On/Off Switch
12 Optional Volume Control Security Cover (included)
11
Q - P O W E R
S E R I ES
120 / 230 V ~ 50 / 60 Hz 1600 W
2 FACILITIES
30
2.2 Q-POWER – The Rear
13 Rating Plate
14 Cooling Air Outlet Vents
15 SPEAKON Outlet Channel A/B
16 SPEAKON Outlet Channel C/D
17 Barrier Strip Outlets Channel A B C D
18 XLR Input Channel A
13 14
Q-POWER 6
1000 W / 4 Ohm
45800
15
16
17
29
19 XLR Input Channel B
20 XLR Input Channel C
21 XLR Input Channel D
22 Gain Selector
23 Euroblock Input Channel A
24 Euroblock Input Channel B
19
21
26 2728
22
20
25
24
25 Euroblock Input Channel C
26 Euroblock Input Channel D
27 Clip Limiter Switch Channel A/B
28 Clip Limiter Switch Channel C/D
29 Barrier Strip Security Cover
30 AC Power Cable
18
23
P. 9
USER MANUAL
Q - P O W E R S E R I ES
2.3 Factory settings
Q-POWER amplifiers are delivered with the following factory settings:
2 FACILITIES
Q - P O W E R
S E R I ES
P. 10
6
Front panel:
5
7 8
11 On/Off Switch The amplifier is switched off.
5 - 8 Volume Control The volume is set to minimum.
Q-POWER 6
120 / 230 V ~ 50 / 60 Hz 1600 W
1000 W / 4 Ohm
45800
Rear panel
21 Gain Selector 32 dB
26 Clip Limiter Switch Channel A/B Off
27 Clip Limiter Switch Channel C/D Off
USER MANUAL
Q - P O W E R S E R I ES
11
21
2627
Make sure that the switches are set to the configuration needed for each
particular application.
Loading...