Camco eaz lift 48475 Installation Instructions Manual
HITCH MOUNT
CARGO CARRIER
™
Includes:
No. Description Qty.
1 Post 1
2 Basket 2
3 Cross Brace 2
4 Hitch Pin 1
5 Spring Clip 1
6 M8X35 Bolt 4
7 M8 Washer 4
8 M8 Lock Nut 4
9 M10X75 Bolt 4
10 M10 Washer 4
11 M10 Lock Nut 4
MODEL #48475
Rear >
2
3
1
4
5 6 9
7
8
10
11
WARNING: READ THE FOLLOWING
INSTRUCTIONS CAREFULLY BEFORE
ATTEMPTING INSTALLATION.
Installation Instructions
WARNING
• The maximum weight capacity is 500 pounds
• Do Not Exceed vehicle or hitch manufacturer’s maximum tongue weight rating
• For use with Class III or better 2” hitch receiver only
• Distribute loads evenly. Do not load heavy objects toward the edges of the rack
• Do not load objects that overhang the rack's side rails
• Not for transport of people, animals, or flammable liquids
• Do not load items in close proximity to the exhaust pipe. If exhaust pipe extends toward the rack an
angled or curved exhaust tip must be used to redirect exhaust away from the cargo carrier
• Securely fasten cargo to the carrier
• Carrier should not be used if carrier is wider than the vehicle
• If carrier or cargo block license plate the license plate should be relocated to a more visible location
• Do not block rear tail lights with the carrier or cargo
CAUTION: CAMCO CANNOT BE HELD RESPONSIBLE FOR ANY DAMAGES DUE TO IMPROPER
USE OR INSTALLATION OF THIS PRODUCT. CAMCO CANNOT BE
STRUCTURAL INTEGRITY OF ANY FRAME.
HELD ACCOUNTABLE FOR THE
Tools for Installation
• (2) 13mm wrench
• (2) 17mm wrench
• Appropriate safety protection (gloves, eye
protection, etc.)
OR
• (2) Adjustable wrenches, 0 to 30mm
NOTICE
If product components
are missing or damaged
do not return to
dealer, contact the
manufacturer.
1-800-334-2004
Instructions
HARDWARE
132 9
10
Align Baskets and Post
HARDWARE
6
7
11
Loosely tighten bolts and
locknuts at this time.
8
Fully tighten all bolts
and locknuts.
HARDWARE
4
5
Secure with Hitch Pin
and Spring Clip
LIMITED WARRANTY
Camco warrants this product to be free from defects in material and workmanship under normal use and service conditions for 12 months from the date of first purchase. Camco’s liability is limited solely to the replacement of any
defective product returned to us. To the extent allowable by law, Camco makes no other warranty, either expressed or implied, nor assumes any liability for incidental or consequential damages resulting from the use of this product or
for breach of warranty of merchantability or fitness for a particular purpose. Submit warranty claims to Camco Manufacturing, 121 Landmark Drive, Greensboro, NC 27409.
CAMCO MFG., INC.
121 Landmark Drive / Greensboro, NC 27409
1-800-334-2004 www.camco.net
#316
Loading...