Cambridge Audio TV2 User Manual

TV5

Vol (2secs)Learn

1

2

Learn Vol

Vol on TV remote

Learn Vol

Vol on TV remote

AUX Line in Optical in AC power socket ARC

Optical In R LAudio In Aux InARC

Service

Only

Aux In RL Audio In Optical In ARC

Max Power Consumption: 120W

Power AC

100-240V AC ~ 50/60Hz

TV2 tv sound plinth with bluetooth

PLACEMENT! TV2 IS DESIGNED TO BE PLACED UNDER YOUR TV. THE TV MUST HAVE A BASE NO WIDER THAN 550MM

(21.5”) AND NO DEEPER THAN 300MM (12”) AND MUST WEIGH NO MORE THAN 30KG (66LBS). IF THE TV BASE IS TOO
LARGE TO FIT, PLACE TV2 ON A LOWER SHELF OF YOUR TV RACK.

TV CONNECTIONS

Only one audio connection to your TV is
required, in order of preference:

1. Optical: If available on your TV, use this for
best quality.

2. ARC: If your TV has a socket labelled ARC
use this connection.

3. RCA: Connect both left and right channels
to your TV.

4. AUX In: Connect to the headphone output
of your TV if neither ARC or optical are
available on your TV.

Note: If the 3.5mm socket is used it takes
priority over the RCA input which will be muted.

BLUETOOTH SET-UP

TV2 is equipped with Bluetooth to allow
wireless playback from any Bluetooth
equipped phone, tablet or computer.

1. Select the Bluetooth input BT on the
remote.

2. To connect a Bluetooth device to TV2,
press and hold the BT button and the
Blue LED will blink.

3. Consult the instructions of the Bluetooth
device to connect to TV2. Successful
pairing will be signalled by a ‘beep’ from
the unit and the Blue LED will stop
ashing.

Once paired, music from your device will play
through the unit.
To add another Bluetooth device, repeat from
step 2. TV2 will store up to 8 paired devices
in memor y.

LEARNING YOUR TV REMOTE

Remove the fabric grille and locate the
control panel. Follow the instructions
remembering to point your TV remote at the
control panel whilst learning.

TOP TIPS

SOUND MODES

There are 4 dierent modes that can be selected to enhance your sound
experience. You can also Increase or decrease the Subwoofer output.

TV: Greatly improved TV sound.
Music: Enhances stereo music and music videos.

AUTO POWER DOWN

To save power, TV2 will
automatically turn o after 20
minutes if no sound is playing
from your TV.

Film: Designed to get the best sound from movies.
Voice: Enhances voices to improve intelligibility.

TV2 is only able to decode LPCM(PCM) 2.0 format signal, Please ensure your source output setting is set to LPCM(PCM).

To talk to us, call [phone] (UK Local) or 1- 87 7-357- 8 20 4 (USA)

AUTO POWER ON

When you turn on your TV,
TV2 will detect the sound and
automatically turn on.

AP35051/1