IMPORTANT
Do not return this product to the store.
Simply call our customer service department for any questions or concerns:
1-800-890-4076
(8:30am - 5:30pm E.S.T.)
DATED PROOF OF PURCHASE REQUIRED FOR WARRANTY SERVICE.
IMPORTANTE
No devuelva este producto a la tienda.
Sólo hay que llamar nuestro departamento de servicio al cliente en caso de tener preguntas o inquietudes:
1-800-890-4076
(8:30am - 5:30 p.m. E.S.T.E.)
SE REQUIERE PRUEBA DE COMPRA CON FECHA PARA SERVICIO BAJO GARANTÍA.
ELECTRIC HEATER
CALENTADOR ELÉCTRICO
Due to constant improvements to our products, images may differ slightly from actual product.
Debido a la mejora continua de nuestros productos, las imágenes pueden variar ligeramente del producto real.
TABLE OF CONTENTS
SECTION 1: QUICK REFERENCE GUIDE |
|
|
1.1 |
Special Characteristics ................................................................................................................................ |
3 |
1.2 |
Unpacking and Installing Your Electric Fireplace ........................................................................................ |
3 |
SECTION 2: WARNINGS & PRECAUTIONS |
|
|
2.1 |
Important Safety Instructions................................................................................................................... |
4-5 |
2.2 |
Specifications .............................................................................................................................................. |
6 |
2.3 |
Testing the Unit............................................................................................................................................ |
6 |
SECTION 3: UNDERSTANDING YOUR ELECTRICAL FIREPLACE |
|
|
3.1 |
Parts list ....................................................................................................................................................... |
7 |
SECTION 4: OPERATING INSTRUCTIONS |
|
|
4.1 |
Grounding Instructions ................................................................................................................................ |
8 |
4.2 |
Control Panel Operating Procedures ....................................................................................................... |
8-9 |
SECTION 5: MAINTENANCE |
|
|
5.1 |
Cleaning Your Fireplace............................................................................................................................. |
10 |
5.2 |
Cleaning the Front Window Panel ............................................................................................................. |
10 |
5.3 |
Replacing Flame Bulbs.............................................................................................................................. |
11 |
SECTION 6: TROUBLESHOOTING................................................................................................................................ |
12-14 |
|
CAUTION: BEFORE OPERATING THIS EQUIPMENT PLEASE READ THESE INSTRUCTIONS CAREFULLY.
Version 1
1
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
1.Before permanently setting up your fireplace, make sure to plug it into a convenient outlet and verify the circuit breakers operate correctly.
2.The electric fireplace may emit a slight, harmless odor when first used. This odor is normal and is caused by the initial heating of internal fireplace parts. This odor occurs only at the time of set-up.
3.If your electrical fireplace does not emit heat, consult the User Manual for further information.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NO USER - SERVICEABLE PARTS INSIDE
HIGH TEMPERATURE
SA 1965A
CAUTION:
HIGH TEMPERATURES!
KEEP DRAPERIES, ELECTRICAL CORDS AND OTHER FURNISHINGS AT LEAST 3’/0.9 M FROM THE FRONT AND AWAY FROM THE SIDE AND REAR OF THE HEATER.
WARNING:
1.RISK OF FIRE - KEEP COMBUSTIBLE MATERIAL AWAY FROM THE FRONT OF THE ELECTRICAL FIREPLACE.
2.SERVICING SHOULD BE DONE ONLY WHILE THE ELECTRICAL FIREPLACE IS DISCONNECTED FROM THE POWER SUPPLY.
2
SECTION 1 |
QUICK REFERENCE GUIDE |
1.1SPECIAL CHARACTERISTICS
A)The smoldering glow of the flames are similar those observed in a real fireplace.
This heater is ideal for year round use even when the central heating has been turned off.
B)This fireplace produces a hot air current.
1.2 UNPACKING AND INSTALLING YOUR ELECTRIC FIREPLACE
•Open the packaging carefully and remove the fireplace.
•Remove and discard the plastic bag.
•BE RESPONSIBLE WHEN HANDLING THE PACKING MATERIALS.
•WARNING: KEEP PLASTIC WRAPPING AWAY FROM CHILDREN.
•Keep the original packaging for future transport and/or storage.
•Keep the front of the unit, through which the heat is radiated, at least 3’/0.9 m away from furniture, curtains and other flammable objects/materials at all times.
Ensure there is a grounded socket nearby (back of the appliance).
NOTE:
A dedicated power circuit is recommended for the unit but not required. Additional electrical appliances on the same circuit may exceed the current (amperage) rating for that circuit. If after the installation of your unit, the circuit breaker trips or the fuse fails on a repeated basis, then a dedicated circuit will likely be required.
Any new wiring must be done in compliance with local and national codes and other applicable regulations in order to reduce the risk of fire, electric shock or other injuries. It is strongly recommended that you hire a licensed electrician to complete any such work.
3
WARNINGS & PRECAUTIONS |
SECTION 2 |
2.1 IMPORTANT SAFETY INSTRUCTIONS
This symbol alerts you to potential hazards that can kill or hurt you and/or others.
DANGER
WARNING
You can be killed or seriously injured if you donʼt immediately follow these instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Warning: When using this product, basic precautions should always be taken, including the following:
Your Cambridge Electric Fireplace is classified as a moveable heater. As with any electrical appliance and particularly with electric heaters, basic precautions must be followed in order to reduce the risk of fire, burns, electrical shocks and/or other serious injuries or death.
1.Read all the instructions in your User’s Manual before using this unit.
Warning: Any other use not recommended or described in your User’s Manual may cause fire, burns, electric shock and other serious injuries or death.
2.The unit can become hot when in use. To avoid accidental burns, do not allow bare skin to come into contact with the hot surfaces of the unit. Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
3. Keep combustible materials, such as: curtains, drapes, furniture, pillows, clothing, linens, bedding, paper, etc., at least 3’/0.9 m from the front and away from side and rear of the heater. Do not use this unit in areas where gasoline, paint or other flammable liquids or their associated vapors may be present.
4.Do not use this unit for drying any wet objects, such as clothes, toys, etc.
5.Always unplug heater when not in use.
6.Do not use outdoors.
7.Do not operate the unit if it is damaged or has malfunctioned. If you suspect the unit is damaged, please call customer service at 1-800-890-4076 before returning this unit to the store.
8.This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
9.To reduce the risk of fire, do not place or install this unit in areas where the ventilation or circulation ducts may become blocked. Make sure there are at least 4”/10.15 cm of space between the back of your fireplace and the wall. Keep a minimum distance of 2”/5.08 cm on each side of your fireplace free.
4
SECTION 2 |
WARNINGS & PRECAUTIONS |
2.1IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
10.Do not insert or allow foreign objects to enter any of the ventilation or circulation ducts as this may cause electric shock, fire or otherwise damage the unit.
11.The unit’s power cord must be connected to a properly grounded and protected, 120 V electrical outlet. Always use ground fault protection where required by the electrical code. To reduce the risk of fire, do not run cord under carpeting. Do not route the excess power cord in front of the hot air outlet of the heater, instead route it behind the fireplace. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
12.Avoid the use of an extension cord, which may overheat and cause a fire. However, if an extension cord must be used,
the cord must be a three-wire cord, No.14 AWG minimum size, with a grounding plug connector and rated at a minimum of 1875 W.
13.Always disconnect the unit from the power supply before performing any cleaning, maintenance, relocating the electric fireplace or when the unit is not in use for long periods of time.
14.When transporting or storing the unit, keep it in a dry location, free from dust, excessive vibration or other factors, which may damage the unit.
15.Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
16.To disconnect heater, turn controls to off, then remove plug from outlet.
17. To prevent a possible fire, do not block air inlets or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
18.A heater has hot and sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
19.Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
Warning: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by-a person responsible for their safety.
Warning: Children should be supervised to ensure that they do not play with the appliance.
Warning: If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
SAVE THESE INSTRUCTIONS
5
WARNINGS & PRECAUTIONS |
SECTION 2 |
2.2 SPECIFICATIONS |
|
|
TECHNICAL SPECIFICATIONS |
|
|
ITEM (MODEL) |
16716 (HBL-15SDBP/M26) |
VOLTAGE |
120V AC |
|
|
FREQUENCY |
60 Hz |
POWER |
1500 W |
NET WEIGHT |
19.8 kg / 43.7 lbs |
|
|
UNIT DIMENSIONS |
22.875” L x 15.5” W x 25.59” H |
|
58.1 cm L x 39.4 cm W x 65 cm H |
2.3 TESTING THE UNIT
Carefully remove the unit from the box. Prior to permanently installing the unit, test to make sure the unit operates properly by plugging the unit’s power cord into a conveniently located 120 V grounded outlet.
CAUTION:
The unit’s power cord must be connected to a properly grounded and protected 120 V outlet. Always use ground fault protection where required by the electrical code.
WARNING:
Do not operate the unit if it is damaged or has malfunctioned. If you suspect the unit is damaged, please call customer service at 1-800-890-4076 before returning this unit to the store.
Refer to the Operating Instructions regarding the various controls and features of the unit.
6
SECTION 3 |
UNDERSTANDING YOUR ELECTRICAL FIREPLACE |
3.1 PARTS LIST
Top plate |
|
Fig. 1 |
|
|
Door with |
|
transparent |
|
window |
Handle |
Foot
Pilot light
Hot air outlet
Fig. 2
Control panel
Back plate |
2 spare replacement |
bulbs stored in the packaging foam
Room air inlet
7
SECTION 4 |
OPERATING INSTRUCTIONS |
4.1 GROUNDING INSTRUCTIONS
This fireplace is for use on 120 V outlets. The cord has a 3 blade plug (See Figure 3-A). An adapter is available for connecting three-blade grounded-type plugs to two-slot receptacles (See Figure 3-C). The green grounding plug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available.
Figure 3
A |
B |
C |
|
Metal Screw |
|
|
Cover of Grounded |
Grounding Means |
|
Outlet Box |
|
Grounding Pin |
|
4.2 CONTROL PANEL OPERATING PROCEDURES
Once the unit has been properly connected to a grounded electrical outlet, it is ready to operate.
Note: Ensure the circuit breakers for the power supply are turned on.
•Pilot Light for Heater: Pilot light goes on when heater is in use.
Note: The Flame and Heating system are controlled |
by separate power switches and can work independent |
from each other. The Flame system can be on |
while the Heating element is off and the Heating element |
can be on while the Flame system is off. We suggest that you should turn the Flame system and Heating system on at the same time when you turn on the electrical fireplace.
Figure 4
8
Loading...