PA310 PresentationPro™ Owner’s Manual
Thank you for purchasing this PresentationPro™ (PA310), the most versatile and portable PA for use in school, business, Houses of
Worship and government facilities.
We encourage you to visit www.califone.com/registration.php, to register your product for its warranty coverage, to sign up to
receive our newsletter, download our catalog, and learn more about the complete line of Califone audio visual products, including
portable and installed wireless PA systems, multimedia players and recorders, headphones and headsets, computer peripheral
equipment, visual presentation products and language learning materials.
Unpacking your PresentationPro™
Inspection and inventory of your system. Check unit carefully
for damage that may have occurred during transit.
Each PresentationPro™ product is carefully inspected at the
factory and packed in a special carton for safe transport.
ALL DAMAGE CLAIMS MUST BE MADE
WITH THE FREIGHT CARRIER
Notify the freight carrier immediately if you observe any
damage the shipping carton or product. Repack the unit
in the carton and await inspection by the carrier’s claim
agent. Notify your dealer of the pending freight claim.
Warranty Registration
Please visit the Califone website to register your
PresentationPro™ for warranty coverage.
Returning your unit for service or repairs
Should your unit require service, contact your dealer or
our Customer Service Department at (800) 722-0500 to
obtain a Return Authorization (RA) number. All shipments
to Califone must include an RA number on the carton and
must shipped prepaid. C.O.D. shipments will be refused
and returned at your cost.
Contents
a) PA310 Powered Amplier*
b) PI-RC Remote Control and (2) AAA Batteries
c) Quick Start Sheet
*MB-PA3W mounting bracket sold separately
Connections and Functions
NOTE: When rst connecting other equipment to
“aux in” or “line” in make certain that their power is
o and volume control at minimum.
1
Recommended Set-up Procedure
Ideally volume on the unit should be set at maximum before the microphone volume is adjusted to the desired level.
Turn on the main power switch and use either a wireless microphone or cabled microphone to adjust the volume.
Operating The Sound System
• Place the PresentationPro at its desired location.
• CAUTION: Assure the 120/240 switch is in the correct position.
• Plug the power cord into a grounded 120 volt, 60 Hz outlet.
• Connect and audio source. Plug a microphone into either the XLR MIC input jack or the ¼” phone mic input or a wireless
Califone microphone. An audio source can be plugged into the AUX or LINE IN jacks.
• Turn the power switch “ON” (the red LED on the rear panel should light).
• Adjust volume (press the Vol+/Vol- on the rear panel or keys on PI-RC remote control), bass/treble controls for desired sound.
• Point the remote control at the speaker grill).
continued on page 3
Visit us online at califone.com
2