Califone PA283 User Manual

Bluetooth VoiceSaver
Quick Start Guide
Model PA283
The Voicesaver and its dedicated Bluetooth headset each need to be fully charged before use.
Insert the included 4AA rechargeable Li-on batteries into the battery compartment of the Voicesaver. Make sure the polarity of the batteries matches the diagram inside the battery compartment. Before its first use, charge the PA overnight. Its LED will change from red to blue once fully charged. Successive charges can be done in four hours and two-hours for the headset.
Turning the Unit On Once charged, first disconnect the PA283 from the charger and then turn it on. The VoiceSaver
will make a beeping sound indicating it’s searching for its wireless headset. (The beeping won’t sound if the optional wired PAM283 headset is plugged in.) the LED will flash twice in 3 seconds once connection is made.
Disconnect its Bluetooth headset from charging. Depress the button in the middle of the earcup
for at least 5 seconds to turn the headset on. Once on, the light above the earcup will flash between blue and red. When it has warmed up and has automatically paired with the PA283, the unit will beep and the light will stay blue.
Operations Once synced, the headset has a 30' range to the PA, enabling a user to move about without
having to wear the PA283.
Volume Control Volume can be adjusted on the PA itself and also with the buttons on the headset to increase or
lower the volume.
Watch the video to learn more about the PA283 or visit califone.com/products/pa283.php
NOTE: This product has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : -Reorient or relocate the receiving antenna. -Increase the separation between the product and receiver. - Connect the product into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer for help.
“Project Intercept"
Please contact us immediately if you experience any difficulties with your VoiceSaver. Make sure to register register your VoiceSaver califone.com/registration
™ for its warranty coverage by visiting
Scan this code to watch the video
Our “Project Intercept" customer service program will quickly repair or replace items under warranty. Simply contact us via phone or email warranty@califone.com.
We are proud of helping teachers enhance student understanding and achievements since 1947, with your satisfaction as our first priority.
Califone®International LLC. 800-722-0500
califone.com
PA283, February 2015
Loading...