M319
Beltpack Transmitter
Owner’s Manual
The M319 is compatible
with these Califone UHF products.
Beltpack Transmitter
Thank you for choosing the M319 Beltpack
transmitter. It provides wireless audio
transmission to the Califone® PA919SD,
PA919, PA919PS PA systems and can be
used for indoor and outdoor applications.
We encourage you to visit our website
to register your M319 at califone.com/
registratiom for its warranty coverage, and
while there sign up for our newsletter and
also learn more about the complete line of
Califone audio visual products including:
Portable and installed wireless PA systems,
multi-media players & recorders, headphones
and headsets, computer peripheral
equipment, visual presentation products
and language learning materials.
Package Contents:
( 1 ) M319 16-Channel UHF Transmitter
( 1 ) User Manual
1
Channel
Up/Down
Power
Hi/Low RF
Power
3.5mm
Mic In
Volume
9V Battery
Compartment
There are two wireless 900MHz mic receivers on the
PA919SD and PA919 (single frequency on the PA919PS).
These frequencies are not compatible with any PA916 Series
In the US, only the low power (5dBm) setting should be used
April 2009
PAs, or the M-316 or Q-316 microphones.
to comply with FCC Part 15 requirements.
1145 Arroyo Avenue, # A • San Fernando, CA 91340 USA
Toll Free 800.722.0500 | Toll Free Fax 877.402.2248
International Customers call 818.407.2400 or Fax 818.407.2405
califone.com | califonepro.com
NOTE:
Califone® International Inc.
M319
Owner’s
Manual
900MHz Frequency
Product Compatibility
The M319 Beltpack Transmitter (and Q319
Microphone) are compatible with the PA919SD,
PA919, PA919PS PAs. They are not compatible
with the PA916 series PAs or the M-316 or Q-316
microphones.
Warranty Registration
The warranty for the M319 specically
covers use in schools, churches, and business
& industry applications, unlike consumer
electronic products. This is critical to help avoid
lost class time due to “down” equipment and
helps stretch budgets.
Califone warrants the M319 to be free from
defective material and workmanship for one
year from the purchase date. Our “Project
Intercept” Customer Satisfaction program will
replace defective parts and repair malfunctioning
products under this warranty when the defect
occurs under normal use, provided the unit is
returned to our factory via prepaid transportation
only after the factory issues an RA
(Return Authorization) number which
must be clearly written on the outside
of the shipping box.
All Damage Claims Must Be Made
With The Freight Carrier
Notify the freight carrier immediately if you
observe any damage the shipping carton or
product. Repack the unit in the carton and
await inspection by the carrier’s claim agent.
Notify your dealer of the pending freight claim.
Returning your unit for service or repairs
Should your unit require service, contact your
dealer or our Customer Service Department
directly via email (warranty@califone.com), or
by phone at 800-722-0500 / 818-407-2400 to
rst obtain a Return Authorization (RA) number
before sending it back to Califone.
Damage Requiring Service
The M319 should be serviced by
qualifed service personnel when:
• Objects have fallen on it or liquid
has been spilled onto it
• It has been exposed to rain
• It does not appear to be operating
normally or exhibits a marked
change in performance
• It has been dropped or the
enclosure damaged
All shipments to Califone must include the
RA number clearly marked on the exterior of
the shipping carton and must shipped prepaid.
C.O.D. shipments will be refused and returned
at your cost.
Servicing
The user should not attempt to service
the M319 beyond that described in these
operating instructions.
visit us online at califone.com | califonepro.com
2
Operating Instructions:
The microphone frequency must rst be set to
the same frequency as the receiving PA.
1. Open th battery cover and insert a 9V battery
(not included) into battery compartment.
Close the battery cover.
2. Adjust the volume knob to minimum.
3. Connect one of the Califone microphones
(shown on pages 3 & 4) to the 3.5mm
mic input jack. The M319 can accept
dynamic or electret microphones.
4. Turn on the M319 power switch. The LCD
will display the current transmit channel.
5. To change the transmit channel:
• Use a pen to hold the channel down
button for about 3 seconds.
• The transmit channel will begin to ash
on the LCD.
• Release the down button.
• Then use the up/down buttons to change
to the desired transmit channel.
• After about 3 seconds the transmit
channel will be set and the channel on
the LCD display will be solid.
• Make sure the transmit channel is not being
used by any other transmitters in the area or
there could be audible interference. If there
is any interference or distortion, try using a
dierent channel.*
6. Set the Califone receiver to the same
channel as the transmitter.
7. Turn on the receiver and rst adjust its
volume level.
8. Then turn the M319 on and adjust its volume
level to the desired level.
3
LM-316
CM-316
* Since the PA919SD and PA919 each have
two built-in wireless receivers, make sure the
corresponding M319 (or Q319) transmitters are
set to dierent frequencies (one for
each channel).
Power Adjustment (Optional):
1. The power output of the M319 can be
adjusted between low (5mW) and high
(10mW) power settings, depending on the
level of interference or the range of required
transmission (low power up to 40’/high
power up to 200’). When there may be
other PA products used in neighboring or
adjoining rooms, using the low setting will
reduce the occurrence of experiencing
any interference.
2. With the power o, simply change the
transmit power by moving the switch to
the desired setting.
HBM-316
OE-316
NM-316
Specications
Carrier Frequencies 902 ~ 928 MHz (16 channels)
Modulation FM
Frequency Stability ±5KHz
Transmitting Power Switchable: 5dBm / 10dBm
Spurious Rejection >55dB
AF Modulation Depth 20K (AF=1KHz50MV)
Volume Code Modulate Depth 3.5K ± 0.5K
AF Frequency Response 80HZ~18KHz (±3dB)
S/N >90dB
Distortion <1% (AF=1 KHz)
Dynamic Range >90dB
Transmission Distances High setting – approximately 200 feet
Low setting – approximately 40 feet
Operating Voltage DC 6V~9V
Current <42MA
Safety / Compliance Testing FCC, RoHS
Battery Requires 9V battery (not included)
Operational Temperature -10oC to +60oC
Input Jack 3.5mm
visit us online at califone.com | califonepro.com
4
M319_manual.indd 2 6/22/09 1:11 PM