Calculated Industries 4018, MEASURE MASTER 5 Specifications
M
EASURE
M
ASTER
5
™
MODEL 4018
Feet-Inch-Fraction and Metric Calculator
Get professional results every time with this handy and easy-touse tool for projects involving measurements! Work and convert in
all dimensional formats including feet-inches-fractions, decimal
feet, decimal inches, inches, fractions, yards, meters, centimeters
and millimeters, as well as areas and volumes. The
Measure
Master 5
is ideal for faster, more accurate material estimates.
Quickly solve circumference, circle area and arcs. Use it at home
or in the shop for on-the-spot calculations for all your projects —
saving you time and money!
Model 4018
Easy-to-use with upgraded features, the
Measure Master 5
meets the challenge for fast,
accurate solutions in the office or on the jobsite. Carry it in your tool box or briefcase.
4018-SPEC-4C-1_06
4840 Hytech Drive
Carson City, NV 89706
1-775-885-4900
Fax: 1-775-885-4949
Visit our website at:
www.calculated.com
Dimensional Math for Craftsmen, Fabricators and Design Professionals
Dimensional Math and Conversions;
Feet-Inch-Fractions and Metric
Area and Volume Calculations;
Easily find Square and Cubic Values
Instant Circle Solutions;
Solve Area, Circumference, Diameter
Material Estimation and More!
Quickly calculate material costs
Product Specifications — Measure Master 5 Model 4018
Size: 5.5" x 2.9" x 0.5" (140mm x 73.7mm x 12.7mm)
Weight: 3.2 oz. (90.7 gm) does not include Case or User’s Guide
Power: One (1) 3-Volt Lithium (CR-2032) Battery
Display: 11 Digits (7 normal, 4 fractions) with Full Annunciators
LCD Dimensions: 0.67" x 2.44" (17mm x 62mm)
Accuracy: 12 Digit Internal Accuracy
Included with Every Measure Master 5:
Easy-to-follow English/Spanish User’s Guides; Protective Armadillo Gear® Case and Long-life Battery.
Full One-Year Limited Warranty:
All Calculated Industries calculators and electronic tools are covered by a Full One-Year Limited Warranty
against defects in materials and workmanship. The full text of each warranty is published in the documentation accompanying each product and at www.calculated.com. Calculated Industries reserves the right to
make changes in the materials and specifications of products without notice.
•
Designers
•
Craftsmen
•
Tradespersons
•
Fabricators
•
Woodworkers
•
Technicians
Measure Master 5 is the choice for:
• Saves time…dimensions and meas-
urements are entered with no conversions required, no special keystrokes
or routines to learn.
• Accurate…eliminates reliance on
error-prone hand calculations.
• Measurement conversions and other
calculation-intensive solutions are
nearly automatic.
Dimensional Math and Conversions
4050 4018
Feet-Inch-Fraction, Inch Fraction, Yards U
U
Decimal Feet (10ths, 100ths), Decimal Inches U
U
Preset Fractions (1/2" through 1/64") U
U
D:M:S, Decimal Degree Entry and Conversions v
Full Metrics (m, cm, mm) U
U
Right Angle Solutions
Complete Right Angle/Rafter Calculations U
Pitch Key (Slope and Grade) U
Rise, Run, Diagonal/Common Rafters U
Hip/Valley Key U
Jack Rafters Key U
Irregular Hip/Valley and Jacks U
Stair Layout Key U
Diagonal Key U
Expanded Rake-Wall U
Area and Volume Solutions
Square and Cubic U
U
Basic Circular Calculations U
U
Weight per Volume Conversions U
U
Special Functions
Board Feet U
U
Works as a Regular Calculator (~,!, @, #, +/–, %, π, 1/x, x
2
, √
—
2
) U
U
User-Definable Preferences ● v
Entry Editing Backspace Key ● v
Cost per Unit (Total costs based on unit price) U
U
Additional Capabilities and Characteristics
Paperless Tape U
U
Number of Memories 1 4
m, cm, mm — Calculations
in Metric dimensions
Yds, Feet, Inch, / — Work in
Yards, Feet, Inches, Fractions
Tape — Paperless Tape;
review last 20 entries
Conv — Perform
conversions; access
secondary functions
Stor/Prefs — Store and set
preferences for Fractions,
Area, Volume, Metric
decimal display
Weight per Volume —
Used for Weight and
Volume Conversions
BdFt — Calculates
Board Feet
Basic Arc Functions —
Arc°, Chord, Segment and
Arc Area, Segment Height
Circ — Circular
Calculations including Area,
Circumference, Diameter
Backspace Key —
Easily edit entries
Easy-to-use for Fast, Accurate Construction-Math Solutions
MEASURE MASTER 5
™
MODEL 4018
Feet-Inch-Fraction and Metric Calculator
DESIGNERS • TRADESPERSONS • WOODWORKERS • CRAFTSMEN
FABRICATORS • TECHNICIANS
Dedicated Keys and Functions Make It Easy To Use
M
EASURE
M
ASTER
5
C
ONSTRUCTION
M
ASTER
5
Compare
Calculator Features:
Measure Master 5™ is a trademark, Armadillo Gear® and Calculated Industries®
are registered trademarks of Calculated Industries, Inc. © 2006. All rights reserved.
v
=
New or Enhanced Features/Functions
4018-SPEC-4C-1_06
Includes Free
Armadillo Gear
®
Protective Hard Case
Shock absorbing, ergonomic,
soft-grip case with a tough 360°
flip-top hard cover.
Loading...