Calculated Industries 8030 User Manual

CONVERSIONCALC PLUS
ULTIMATE PROFESSIONAL CONVERSION CALCULATOR
FAST. ACCURATE. RELIABLE.
Model 8030
CONVERSIONCALC PLUS™
With the ConversionCalc Plus you can enter and convert everything from very large units to micro- and nano­units -- kilograms and tons, drams, scruples, grains, microliters, even tablespoons and cups. Don’t waste time looking up tables and conversions in books and online. Virtually any
conversion is at your ngertips with the
ConversionCalc Plus.
The ConversionCalc Plus™ is the professional choice for:
• Health Care Professionals
• Scientists
• Pharmacists
• Nutritionists
• Lab Technicians
• Speciers
• Importers/Exporters
With the ConversionCalc Plus™ you can convert:
• Flow Rate
• Weight
• Linear, Area and Volume
Dimensions
• Temperature
• Weight per Volume
• Pressure
• Torque
• Energy
• Power
• Velocity
Pocket RefeRence Guide — 3
TABLE OF CONTENTS
GETTING STARTED
Key Denitions
Basic Function Keys 6
Miscellaneous Function Keys 7
Conversion Function Keys 9
Preference Settings
Calculating Percentages
Using Exponential Notation
Memory Operation
Paperless Tape Function
USING THE CONVERSION CALC PLUS
Using the 2nd and 3rd Function Keys
Entering Dimensions and Units
Linear Dimensions 22
Square and Cubic Dimensions 23
Converting Units
Conversion Examples
Linear Conversion 24
Area Conversion 25
6
6
14
16
17
19
20
21
21
22
23
24
Volume Conversion 25
Weight Conversion 28
Weight/Volume Conversion 29
Temperature Conversion 31
Flow Rate Conversion 31
Pressure Conversion 32
Velocity Conversion 33
Torque Conversion 33
Energy Conversion 34
Power Conversion 34
APPENDIX
Default Settings
Auto Shut-Off
Accuracy/Errors
Battery
Reset
REPAIR AND RETURN
WARRANTY
FCC CLASS B
LOOKING FOR NEW IDEAS
Pocket RefeRence Guide — 5
35
35
36
36
37
38
38
39
42
42
GETTING STARTED
You may want to practice getting a feel for your calculator keys by
reading through the key denitions
and learning how to enter data, how to store values, etc., before
proceeding to the examples.
KEY DEFINITIONS
Basic Function Keys
O
o
+-* ,=
0 - 9
and
%
On/Clear Key — Turns on
power. Pressing once clears
the last entr y and the display.
Pressing twice clears all non-
permanent values.
Off — Turns all power off.
Clears all non-permanent
values.
Arithmetic operation keys.
Keys used for entering
numbers.
.
Percentage — Used to
dene a given percentage of
a num ber.
/
S and T
r
Sr
P
SP
Miscellaneous Function Keys
B
Fraction Bar — Used to
enter fractions. Fractions can be entered as proper (1/2, 1/8, 1/16) or improper (3/2, 9/8). If the denominator (bottom) is
not entered, the calculator’s fractional accuracy setting is automatically used.
Used with the dimensional keys to convert between units or with other keys to access special functions.
Recall — Used with other keys to recall stored values and settings.
Store — Used for storing values.
Accumulative Memory —
Adds displayed value to Accumulative Memory.
M- — Subtracts displayed
value from Accumulative
Memory.
Backspace Key — Used to delete entries one at a time (unlike the
deletes the entire entry).
Pocket RefeRence Guide — 7
O key which
(cont’d)
(cont’d)
SB Square Root (!) —
Calculates the Square Root
of the number in the display.
S=
T/
S,
S*
S-
S+
Paperless Tape (Tape) —
Accesses the Paperless
Tape Mode, which keeps track of your past 20 entries. Useful for checking strings of numbers.
Preference Settings (Prefs) — Accesses various
customizable settings, such as dimensional answer
formats (see Preference Settings section).
Reciprocal (1/x) —
Calculates the reciprocal of
the number in the display. (e.g.,
8S,= 0.125).
Clear All — Returns all
stored values to the default settings. Does not af fect
Preference Settings.
Change Sign (+/–) — Toggles displayed value between negative and positive value.
Pi — Displays value of
(3 .141593) .
S.
Total Cost (Cost) —
Calculates total cost based
on entry of per unit cost.
S%
x2 — Squares the value on
the dis play.
S/
Exponential Notation
y
x(10
) — Enters exponential
notation values. Also used to toggle between exponential and non- exponential modes.
T%
Weight per Volume (wt/vol) — Stores a new
Weight per Volume value. Default value is 62.42796 pounds per cubic foot (1,000
kilograms per cubic meter).
CONVERSION FUNCTION KEYS
With the ConversionCalc Plus you
can easily and quickly enter or
convert any of the following units.
Linear, Area and Volume Keys
UNIT KEY
Feet
Inch
Yar d s
Meter
Pocket RefeRence Guide — 9
f i y m
(cont’d)
(cont’d)
UNIT KEY
Centimeter
Millimeter
Kilometer
Miles
Acre
Hectare
Board Feet (Bd-Ft)
Acre Feet (Acre -Ft)
Gallon
Fluid Ounce
Quart
Pint
Cup
Tablespoon (tbsp)
Teaspoon (tsp)
Dram (dr)
Minim (min)
Liters
Milliliter
Deciliter (dl)
Centiliter (cl)
Microliter (μl)
Nanoliter (nl)
Drops (gtts)
c M k N S5 S4 S0 S6 G F Tm Tc TM Tk TN Ti Tf l L TG TF Tl TL Ty
Weight Keys
UNIT KEY
Ton s
Pounds
Dry Ounce
Kilogram
Grams
Milligram (mg)
Microgram (mcg)
Nanogram (ng)
Metric Tons (met tons)
Grains
Scruples (sc)
Velocity Keys
UNIT KEY
Feet per Minute
Inches per Second
Feet per Second
Miles per Hour
Meters per Minute
(ft/min)
(in/sec)
(ft/sec)
(mph)
(m/min)
Pocket RefeRence Guide — 11
t p d K g Td TK Tg S1 Tt Tp
Sy
Si
Sf
SN
Sm
(cont’d)
(cont’d)
UNIT KEY
Meters per Second
Millimeters per Second
Kilometers per Hour
Flow Rate Keys
UNIT KEY
Gallons per Minute
Ounces per Second
Liters per Second
Milliliters per Second
Pressure Keys
UNIT KEY
Pounds per Square Inch
Pounds per Square Foot
Kilopascals (kPa)
Megapascals (MPa)
Bars
(m/sec)
(mm/sec)
(km/h)
(gpm)
(oz/sec)
(liters/sec)
(mL/sec)
(psi)
(psf)
Sc
SM
Sk
SG
SF
Sl
SL
Sp
Sd
SK Sg St
Torque Keys
UNIT KEY
Inch-Pounds (in-lbs)
Foot-Pounds (ft-lbs)
Newton-Meters (N- m)
Temperature Keys
UNIT KEY
Celsius (°C)
Fahrenheit (°F)
Kelvin (K)
Rankine (°R)
Réaumur (°r)
Energy Keys
UNIT KEY
Joules (J)
British Thermal Units
Kilocalories (kcal)
Power Keys
UNIT KEY
Horsepower (hp)
BTU per Hour (btu/hr)
Kilowatts (kW)
(BTU)
S7 S8 S9
S2 S3 T1 T2 T3
T4
T5
T6
T7 T8 T9
Pocket RefeRence Guide — 13
PREFERENCE SETTINGS
T, then / to access the
Press Preferences menu. Continue pressing
/ to toggle through different
Preferences. Press
to toggle between options of the
different Preferences. Press exit Preferences. Your calculator will keep your Preference Settings until a Full Reset alters your settings to
the default values (see Appendix for more information).
KEYSTROKE DI SP L AY
+ or - keys
O to
T/ (Fractional
Resolution)
+ + + + + + (repeats options)
Second press of
(Area Answer Format)
+ + + + (repeats options)
FRAC 0-1/64
FRAC 0-1/2
FRAC 0-1/4
FRAC 0-1/8
FRAC 0-1/16
FRAC 0-1/32
FRAC 0-1/64
/:
AREA 0.
AREA 0.
AREA 0.
INCH
AREA Std.
SQ FEET
SQ YD
SQ M
AREA Std.
INCH
INCH
INCH
INCH
INCH
INCH
Third press of
(Volume Answer Format)
/ :
+ +
VOL 0.
+ + (repeats options)
Fourth press of
(Exponential Mode)
/:
+ + (repeats options)
Fifth press of
(Metric Rounding)
+ + (repeats options)
Sixth press of
(Mathematical Operation)
/:
METR 0.000
METR FLOAt
METR 0.000
/:
+ + (repeats options)
Seventh press of
(Fractional Mode)
+
/:
FRAC COnSt.
+ (repeats options)
VOL Std.
VOL 0.
CU YD
CU FEET
VOL 0.
CU M
VOL Std.
EXP On
EXP OFF
EXP On
MATH OrdEr
MATH CHAIn
MATH OrdEr
FRAC Std.
FRAC Std.
M
M
M
Pocket RefeRence Guide — 15
CALCULATING PERCENTAGES
% key can be used for nding
The a given percent of a number or for working add-on, discount or division
percentage calculations. It can be
used with any type of number, in any
dimension (feet, inch, millimeter, etc.)
and any type of convention (non-
dimensioned, linear, square or cubic).
Find 18% of 50 feet:
KEYSTROKE DI SP L AY
OO 50f*18%
Find 17.5% of 75 nanograms:
KEYSTROKE DI SP L AY
9
FEET 0 INCH
75Tg*
17.5%
Subtract 37.5% from 130 foot-pounds:
KEYSTROKE DI SP L AY
13.12 5 nG
130S8-
37.5%
81.25
LB FEET
0.
USING EXPONENTIAL NOTATION
Your calculator is defaulted to
have exponential notation set to
“on.” Therefore, any integer value
exceeding seven digits will display in exponential format. When exponential notation is off, the
calculator adjusts dimensioned values to a higher unit when the
display limit is exceeded (known as Auto-Ranging); e.g., “20,000,000 mm” exceeds the seven-digit display,
so “20,000 m” is displayed. This auto-ranging also applies to other
dimensional units, such as Inches to Feet, Feet to Yards, etc.
To enter an exponential value, enter
the main value, press
S/, then
enter the exponential power.
Enter 2.34 x 10
KEYSTROKE DI SP L AY
2.34 S/8 =
8
into the calculator.
2.34000
2.34
2.34
You can also toggle a displayed value
to exponential notation by simply
pressing the
/ key.
(cont’d)
Pocket RefeRence Guide — 17
8
08
(cont’d)
Enter 2,356 and change to exponential notation:
KEYSTROKE DI SP L AY
2356= /
Enter 0.00056 and change to exponential notation:
.00056= /
MEMORY OPERATION
2.35600
0.00056
5.60000
2356.
03
-04
Whenever the
P key is pressed,
the displayed value will be added to the Memory. Other Memory functions:
FUNCTION KEYSTROKE
Add to Memory P
Subtract from Memory SP
Recall total in Memor y rP Display/Clear Memory rr
Memory is semi-permanent, clearing only when you do one of the following:
— turn off the calculator — press
rr
— press S* (Clear All)
When Memory is recalled (rP), consecutive presses of
display the calculated Average and total Count of the accumulated values.
Using M+
KEYSTROKE DI SP L AY
45P 25P 15SP rP P P rr
Using Memory Storage Keys (M0 - M9)
In addition to the standard cumulative Memory (as previously described),
your calculator has ten independent
Storage Registers – M0 through M9 –
that can be used to permanently store single, noncumulative values.
The following example shows the use
of M0 (
Sr0). To use M1 through
M9, replace the presses of the 0 key with presses of the corresponding number key (
1 through 9).
P will
M+ 45. &
M+ 25. &
M- 15. &
TTL 55. &
AVG 18.33333 &
CNT 3. &
M+ 55.
Pocket RefeRence Guide — 19
(cont’d)
(cont’d)
You can replace a value in one of these Memory registers by storing a new value in place of the stored value.
— Store single value in M0
— Clear M0 — Recall M0
Store 212.5 into M0, recall the value and then clear the value.
KEYSTROKE DI SP L AY
212.5 Sr0
M-0 212.5
oO r0 0Sr0
PAPERLESS TAPE FUNCTION
The Paperless Tape function is useful for checking gures. You
can review your entries by scrolling through your past 20 entries or
calculations. Press Paperless Tape mode. Press +
or - to scroll for ward or backward.
Press = to exit mode and continue
with a new entry or calculation.
Add 15 mL, then 25 mL, then 45 mL. Access Paperless Tape mode and scroll back through your entries.
M-0 212.5
M-0 0.
S= to access
0.
KEYSTROKE DI SP L AY
O O 1 5 L + 2 5 L + 4 5 L = r = + + + =
USING THE
CONVERSIONCALC PLUS
USING THE 2ND AND 3RD FUNCTION KEYS
The primary keys are used to access miscellaneous calculator functions and to enter numeric values and units.
Use the
S and T function keys to
enter or convert to the units above the primary keys. The abbreviations for the secondary functions are printed in blue (like the
S key) and the abbreviations
for the third functions are printed in red (like the
T
key).
15.
40.
85.
85.
15.
25.
45. mL
85.
0.
mL
mL
mL
mL
mL
mL
mL
Pocket RefeRence Guide — 21
ENTERING DIMENSIONS AND UNITS
When entering feet-inch dimensional values, you must enter the largest
dimension rst — feet before
inches, inches before fractions. To enter fractions of an inch, enter the
numerator (value above the line), press
/ (Fraction Bar key) and then enter
the denominator (value below the line).
numerator 3 fraction bar denominator 16
For all other units of measurement,
you can only enter whole numbers or decimal numbers. You cannot enter combinations of units (for example, you cannot enter 12 meters 6
centimeters 4 millimeters).
Linear Dimensions
The following examples show how
linear dimensions are entered.
Note: The O key should be pressed af ter each of the entries to clear the display.
DIMENSION KEYSTROKE
5 feet 5f
1/2 inch 1/2
5 feet 1-1/2 inch 5f1i1/2
10 yards 10y
17. 5 m e t e r s 17
.5m
Square and Cubic Dimensions
For square dimensions, enter the value and press the unit key twice. For cubic dimensions, press the unit key three times.
DIMENSION KEYSTROKE
33 square meters 33mm
5.5 cubic meters 5.
5mmm
130 square feet 130ff
CONVERTING UNITS
With the ConversionCalc Plus you can easily convert an entered or calculated unit to other units by simply pressing
the key(s) for the units you want to
conver t to.
Add a series of values and then
calculate the sum and convert to other units.
1. Add 375 milliliters plus 385 milliliters plus 65 milliliters:
KEYSTROKE DI SP L AY
OO
(cont’d)
Pocket RefeRence Guide — 23
0.
(cont’d)
KEYSTROKE DI SP L AY
375L+ 385L+ 65L=
375.
760.
825.
2. Convert to other units:
Tl (microliters) f (cubic feet) i (cubic inches) F (uid ounces) G (gallons)
Note: Continued presses of other units of volume will conver t the values to those units.
825000.
0.029135
50.34459
27.89657
0.217942
CU FEET
CU INCH
F-OZ
CONVERSION EXAMPLES
Linear Conversion
1. Enter 185 feet, 6-1/2 inches and convert to other linear values:
KEYSTROKE DI SP L AY
OO 185f
6i1/2 185
2. Convert to other linear values:
KEYSTROKE DI SP L AY
i y m
FEET
6-1/2
2226 1/2
61.84722
INCH
INCH
56.553
mL
mL
mL
mc
GAL
YD
L
0.
M
c M k N
5655.31
565 5 3 .1
0.056553
0.03514
Area Conversion
Enter 125 square meters and convert to other units of area:
KEYSTROKE DI SP L AY
OO 125mm y f i N
0.000048
c m S5 (acres) S4 (hectares)
Volume Conversion
Enter 75 cubic feet and convert to other units of volume:
KEYSTROKE DI SP L AY
149.4988
1345. 489
193750.39
1250000.
0.030888
0.0125
125
SQ YD
SQ FEET
SQ INCH
SQ MILE
SQ CM
125.
OO 75fff y
Pocket RefeRence Guide — 25
75
2.777778
CU FEET
CU YD
CM
MM
kM
MILE
0.
SQ M
SQ M
ACRE
HECT
0.
(cont’d)
(cont’d)
KEYSTROKE DI SP L AY
m S0 (Board Feet) S6 (Acre Feet)
2.12376 3
900.
0.001722
Enter 15 liters and convert to other units of volume:
KEYSTROKE DI SP L AY
OO 1 5 l F (uid ounces) Tm (quar t) L (milliliters)
507.2103
15
15.85032
15000. mL
CU M
BDFT
ACFT
F-OZ
0.
L
QT
Enter 3.5 cups and
convert to other
units of volume:
KEYSTROKE DI SP L AY
OO
3.5TM (cups) Tk (tablespoons) TN (teaspoons) Ti (drams) Tf (minims) l
Enter 25 drams and units of volume:
KEYSTROKE DI SP L AY
convert to other
3.5
CUP
56.
TBSP
168.
TSP
224.
DRAM
13440.
MIN
0.828059
OO
0.
L
0.
25Ti (drams) L (milliliters) Tl (microliters) TL (nanoliters) Ty (drops or gtts)
25
92 .41728 mL
92417.28 mcL
9.24173
1386.259
DRAM
07
GTTS
nL
Adjust the default to 20 drops per cubic centimeter. Enter 25 drams and convert to other units of volume.
KEYSTROKE DI SP L AY
[O O
0.
[20S
20.
ry[ 25Ti L (milliliters) Tl (µL-microliters) Ty (drops or gtts)
GTTS Per CU CM
25
DRAM
92.41728
92417.28
1848.346
mcL
GTTS
mL
If a low viscosity liquid contains 20 drops per cubic centimeter, how many drops are contained in 2-1/2 teaspoons?
KEYSTROKE DI SP L AY
[OO
0.
20
20.
Sry [
2.[5TN Ty
GTTS Per CU CM
2.5
TSP
246.4461
GTTS
Pocket RefeRence Guide — 27
Weight Conversion
Enter 1,200 pounds and conver t to other units of weight:
KEYSTROKE DI SP L AY
OO 1200p t S1 (metric tons)
0.544311
d K g
Enter 750 milligrams and convert to other units of weight:
KEYSTROKE DI SP L AY
19200.
544.3108
544310.84
1200
0.6 Ton
MET
GRAM
OO 750
Td TK (micrograms) Tg (nanograms) Tt (grains) Tp (scr uples)
(milligrams)
750 mG
750000. mcG
7.50000 08 nG
11.5742 7
0.578713
GRAN
0.
LB
Ton
D-OZ
kG
0.
SC
Weight/Volume Conversions
The ConversionCalc Plus can convert between Weight and Volume. To recall Weight per Volume factor press
T%
. Continue pressing %
to display as pounds, grains, metric tons, kilograms, grams, milligrams or tons. The default weight per Volume factor is:
• 62.42796 pounds per cubic feet
• 0.036127 pounds per cubic inch
• 8.345404 pounds per gallon
• 252.891 grains per cubic inch
• 1 metric ton per cubic meter
• 1,000 kilograms per cubic meter
• 1 gram per cubic centimeter
• 1 kilogram per liter
• 1,000 grams per liter
• 1,000,000 milligrams per liter
• 0.842777 tons per cubic yard
• 1,685.555 pounds per cubic yard
Pocket RefeRence Guide — 29
(cont’d)
(cont’d)
To change the Weight per Volume factor, enter the value, then press
T%. The rst press will enter the
Weight as the calculator’s current setting. To change the Weight per Volume factor, continue to press the
% key to cycle through the factors
shown above. When you have selected the desired factor, press
O to set and exit.
If crude oil has an approximate density of 850 kilograms per cubic meter, how much would 55 gallons weigh?
KEYSTROKE DI SP L AY
OO 850T% *
*Continue pressing % until kG Per CU M is shown.
55G p
55
390.1477
Butter has a density of 56.9 pounds per cubic foot. How much does 6 cups of butter weigh?
KEYSTROKE DI SP L AY
OO
56.9T%*
0.
850
GAL
LB
0.
56.9
*Continue pressing % until LB Pe r CU FEET is shown.
6TM (Cup) p
Note: To return weight/volume factor to default setting of 62.42796 pounds per cubic foot, perform a Clear All by pressing
6
2.852409
S*
CUP
Temperature Conversion
Enter 212° Fahrenheit and convert to other temperatures:
KEYSTROKE DI SP L AY
OO 212S3 S2
(Celsius)
T1 (Kelvin) T2 (Rankine) T3 (Réaumur)
Flow Rate Conversion
Enter 1.3 gallons per minute and
convert to other ow rates:
KEYSTROKE DI SP L AY
212
100
373.15
671.67
80. ºr
OO
1.3SG
(gallons per minute) 1.3
GPM
SF
(ounces per second) 2.773333
Pocket RefeRence Guide — 31
OPS
(cont’d)
LB
.
0.
ºF
ºC
K
ºR
0.
(cont’d)
KEYSTROKE DI SP L AY
Sl (liters per
second)
SL
(milliliters per
second) 82.01726
Pressure Conversion
Enter 345 kilopascals and convert to other units of pressure:
KEYSTROKE DI SP L AY
0.082017
mL/S
OO 345
SK
(kilopascals)
345
Convert to other units of pressure:
Sg(megapascals) St (bars)
0.345
3.45
Sp (pounds per
square inch)
50.03802
Sd (pounds
per square foot)
Velocity Conversion
Enter 150 kilometers per hour and convert to other units of velocity:
KEYSTROKE DI SP L AY
7205.475
OO
L/S
0.
KPA
MPA
BAR
PSI
PSF
0.
150Sk
(kilometers per hour)
150
SN (miles
per hour)
93.20568
Sm (meters
per minute)
2500.
Sc (meters
per second)
41.66667
SM (millimeters
per second)
41666.67
Sy (feet per
minute)
8202.1
Sf (feet
per second)
136.7017
Si (inches
per second)
Torque Conversion
Enter 45 foot-pounds of torque and convert to inch-pounds and Newton-meters:
KEYSTROKE DI SP L AY
1640.42
OO
45S8
(foot-pounds)
S7 (inch-pounds)
45
540.
LB FEET
LB INCH
S9
(Newton-meters)
Pocket RefeRence Guide — 33
61.01179
KM/H
MPH
M/M
M/S
MM/S
FPM
FPS
IPS
0.
N-M
(cont’d)
Energy Conversion
Enter 225 kilocalories and convert to Joules and British thermal units:
KEYSTROKE DI SP L AY
OO 225T6
(kilocalories)
Convert to other units of energy:
T4 (Joules)
225
941400.
KCAL
JOUL
T5 (British
thermal units)
Power Conversion
Enter 175 kilowatts and convert to British thermal units per hour and horsepower:
KEYSTROKE DI SP L AY
892.8721
OO 175
T9
(kilowatts)
175
T8 (British
thermal units per hour)
T7 (horsepower)
597124.79
234.6789
BTUH
0.
BTU
0.
KW
HP
APPENDIX
DEFAULT SETTINGS
After a Clear All (S*), your
calculator will return to the following settings:
STORED VALUES DEFAULT VALUE
Weight per Volu me
62.42796 LB/CU F T
Drops (gtts) per
cubic centimeter
15. Per CU CM
If you replace your battery or perform a Full Reset* (press o, hold down
* and press O), your calculator
will return to the following settings (in
addition to those above):
PREFERENCE SE TTINGS DEFAULT VALUE
Fractional Resolution Area Display
Volume Display
Exponential Mode Meter Linear Display
Mathematical Operation
Fractional Mode
* Pressing Reset ‒ a small hole located
below the Reset.
o
key ‒ will also perform a Full
Standard Standard
0.000
Order
Standard
1/64
On
Pocket RefeRence Guide — 35
AUTO SHUT-OFF
Your calculator will shut itself off after about 8-12 minutes of non-use.
ACCURACY/ERRORS
Accuracy/Display Capacity
Your calculator has a twelve digit display. This is made up of eight digits
(normal display) and four fractional
digits. You may enter or calculate
values up to 19,999,999.99. Each
calculation is carried out internally to twelve digits.
Errors
When an incorrect entry is made, or the answer is beyond the range of the calculator, an error message will display. To clear an error condition you must press the
At this point you must determine
what caused the error and re-key the problem.
Error Codes
OFLO
MATH Error
DIM Error
ENT Error
O button once.
Overow (too large)
Divide by 0
Dimension error
Invalid entry error
Auto-Range
If an “overow” is created because
of a calculation with small units that are out of the standard digit range of the display, the answer will be
automatically expressed in the next
larger units (instead of showing “OFLO”) – e.g., 20,000,000 mm is shown as 20,000 m.
Note: If Exponential Notation is activated through the Preference Set ting, the value
will be shown in scientic notation (e.g., 20
million mm – 2.00000
07
mm).
BATTERY
This model uses one (1) CR2016 battery (included). This should last approximately 800 hours of actual
use. Should your calculator display become very dim or erratic, replace the bat ter y.
Note: Please use caution when disposing of your old batteries as they contain hazardous chemicals.
Replacement batteries are available
at most discount or electronics
stores. You may also call Calculated Industries at 1-775- 885 -4900.
Pocket RefeRence Guide — 37
RESET
If your calculator should ever “lock up,” press Reset – a small hole
located below the perform a total reset.
REPAIR AND RETURN
RETURN GUIDELINES
1. Please read the Warranty in this
User’s Guide to determine if your
Calculated Industries product
remains under warranty before calling or returning any device for evaluation or repairs.
2. If your product won’t turn on,
check the battery as outlined in the User’s Guide.
3. If you need more assistance, please
go to the website listed below.
4. If you believe you need to return
your product, please call a
Calculated Industries representative
between the hours of 8:00am
and 4:00pm Pacic Time for additional information and a Return Merchandise Authorization (RMA).
Call Toll Free: 1-800-854-8075 Outside USA: 1-775-885-4900
www.calculated.com/warranty
o key – to
WARRANTY
Calculated Industries (“CI”) warrants
this product against defects in materials and workmanship for a
period of one (1) year from the date
of original consumer purchase in
the U.S. If a defect exists during the warranty period, CI, at its option,
will either repair (using new or
remanufactured par ts) or replace
(with a new or remanufactured
calculator) the product at no charge.
THE WARR ANT Y WILL NOT APPLY TO THE PRODUCT IF IT HAS BEEN DAMAGED BY MISUSE, ALTERATION, ACCIDENT, IMPROPER HANDLING OR OPERATION, OR IF UNAUTHORIZED REPAIRS ARE ATTEMPTED OR MADE. SOME EXAMPLES OF DAMAGES NOT COVERED BY WARR ANTY INCLUDE, BUT ARE NOT LIMITED TO, BATTERY LEAKAGE, BENDING, A “BLACK INK SPOT” OR VISIBLE CRACKING OF THE LCD, WHICH ARE PRESUMED TO BE DAMAGES RESULTING FROM MISUSE OR ABUSE.
To obtain warranty service in the U.S., please go to the website.
Pocket RefeRence Guide — 39
(cont’d)
(cont’d)
A repaired or replacement product
assumes the remaining warranty of the original product or 90 days, whichever is longer.
Non-Warranty Repair Service —
U.S.A.
Non-warranty repair covers service
beyond the warranty period, or
service requested due to damage
resulting from misuse or abuse.
Contact Calculated Industries at
1-775-885-4900 to obtain current product repair information and
charges. Repairs are guaranteed for
90 days.
Repair Service — Outside the U.S.A.
To obtain warranty or non-warranty repair ser vice for goods purchased outside the U.S., contact the dealer through which you initially purchased
the product. If you cannot reasonably
have the product repaired in your
area, you may contact CI to obtain
current product repair information and charges, including freight and duties.
Disclaimer
CI MAKES NO WARRANTY OR REPRESENTATION, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT’S QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. AS A RESULT, THIS PRODUCT, INCLUDING BUT NOT LIMITED TO, KEYSTROKE PROCEDURES, MATHEMATICAL ACCUR ACY AND PREPROGR AMMED MATERIAL, IS SOLD “AS IS,” AND YOU THE PURCHASER ASSUME THE ENTIRE RISK AS TO ITS QUALITY AND PERFORMANCE.
IN NO EVENT WILL CI BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY DEFECT IN THE PRODUCT OR ITS DOCUMENTATION.
The warranty, disclaimer, and
remedies set forth above are exclusive
and replace all others, oral or written,
expressed or implied. No CI dealer,
agent, or employee is authorized to
make any modication, extension, or
addition to this warranty.
Pocket RefeRence Guide — 41
Some states do not allow the exclusion
or limitation of implied warranties or
liability for incidental or consequential
damages, so the above limitation or
exclusion may not apply to you. This warranty gives you specic rights, and
you may also have other rights, which vary from state to state.
FCC CLASS B
This equipment has been certied to comply with the limits for a Class
B calculating device, pursuant to
Subpart J of Part 15 of FCC rules.
LOOKING FOR NEW IDEAS
Calculated Industries, a leading
manufacturer of special-function calculators and digital measuring instruments, is always looking for new product ideas in these areas.
If you have a new product idea, please visit our “Bright Idea” page at www.calculated.com/brightidea.asp. For suggestions about improving this
product or other products, please visit us at www.calculated.com under
“Contact Us.” Thank you.
4840 Hytech Drive
Carson City, NV 89706 U.S.A.
1-775-885-4900
Fax: 1-775-885-4949
E-mail: info@calculated.com
www.calculated.com
Pocket RefeRence Guide — 43
Designed in the United States of America.
Printed in China
PRG8030E-A
Loading...