Information in this document is subject to change without notice and does not represent a
commitment on the part of Cakewalk, Inc. The software described in this document is furnished
under a license agreement or nondisclosure agreement. The software may be used or copied only in
accordance with the terms of the agreement. It is against the law to copy this software on any
medium except as specifically allowed in the agreement. No part of this document may be
reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying and recording, for any purpose without the express written permission of Cakewalk,
Inc.
Cakewalk is a registered trademark of Cakewalk, Inc. and the Cakewalk logo are trademarks of
Cakewalk, Inc. Other company and product names are trademarks of their respective owners.
Visit Cakewalk on the World Wide Web at www.cakewalk.com.
Version 21.00.00
2
Table of contents
5Preface
5About this manual
6Conventions used in this book
7Installation, registration and basic setup
8Installation
10Cakewalk Command Center
13Running SONAR for the first time
15Basic audio setup
18Connecting your equipment
22Opening a demo project
24I can’t hear the demo project
26Registering SONAR
26Next steps
27SONAR Tour
28Getting around
29The Control Bar
30Skylight
31The Track view
33The Console View
34The Browser
35The Inspector
3
37Getting Started
38Creating, playing and saving projects
39Creating a new project
41Opening project files
42Playing project files
47Recording audio into a project
47Adding an audio track
49Getting ready to record
50Recording your performance
51Troubleshooting
53Index
55LICENSE AGREEMENT
4
Preface
SONAR User Guide is designed to help you learn and use SONAR Artist, SONAR Professional
and SONAR Platinum. This book explains how SONAR works and how to use it to create, edit,
produce, and perform. The SONAR User Guide is task-oriented and contains cross-references
so you can find the information you need. The User Guide book also includes a comprehensive
index that you can use to find information on any specific topic.
About this manual
This manual provides basic information about how to install and set up SONAR and make initial
settings and system setup. It also provides tutorials to help you get started.
Using the online Help
SONAR also includes complete documentation in an HTML-based online Help system.
SONAR’s online Help provides detailed information about each feature in the program,
including menu commands, windows, dialogs, keyboard shortcuts and common procedures.
You can get context-sensitive help at any time by pressing the F1 key.
Need more info?
In addition to the User Guide and the online Help, you can also find more help in the following
places:
The ReadMe file contains information that was not available at the time of this printing. On
SONAR’s Help menu, click View Readme.
Access videos at www.cakewalk.com/CakeTV.
Visit the peer-to-peer Cakewalk forums at http://forum.cakewalk.com.
For technical support and customer service outside the U.S., please visit
www.cakewalk.com/Dealers/Global to find your local Customer Service Center.
Preface5
About this manual
Conventions used in this book
The following table describes the text conventions in this book:
ConventionMeaning
BoldText that appears in bold is a command in SONAR.
Right angle bracket
(File > Open)
Monospace fontA monospace font is used for file names, directory paths and code
Plus sign (+)A plus sign (+) is used between the keys to be pressed in a key
For example: Click OK.
A right angle bracket is a menu item separator and represents a level in
the menu hierarchy.
Example: File > Open means to click on the File menu and select the
Open command.
examples.
Example: Locate the project named SONAR_AudioDemo.cwb.
combination.
Example: CTRL+A means hold down the CTRL key and press the A key.
6 Preface
Conventions used in this book
Installation, registration and basic setup
In this chapter, you will learn how to install and register SONAR, and also how to connect and
configure your audio and MIDI equipment.
In this chapter:
8Installation
13Running SONAR for the first time
15Basic audio setup
18Connecting your equipment
22Opening a demo project
24I can’t hear the demo project
26Registering SONAR
26Next steps
Installation, registration and basic setup7
Installation
Please note before installing:
In order to install SONAR, you must log in to your Windows system as a user who has
administrative privileges. Once installed, the program can also be used by users who do not
have administrative privileges.
If system monitoring software, such as anti-virus programs are installed on your computer,
you must close them until you have finished installing SONAR. You must also remember to
close applications that are not shown in the Windows taskbar.
Cakewalk Command Center provides the easiest way to install SONAR. Simply log in with your
Cakewalk account and Cakewalk Command Center automatically retrieves your serial number
and simplifies the download and installation process. Cakewalk Command Center also makes it
easy to install future software updates. For details, see
10.
If you are not using Cakewalk Command Center, there are a few things you will need to know
before getting started:
“Cakewalk Command Center” on page
Where on your computer the program should be installed. If you are not sure you can simply
accept the default path suggested by the installer.
Where on your computer the Instrument content, sample project files and additional content
should be stored.
Your SONAR serial number. Your serial number will be available at
www.cakewalk.com/my-account, or it was delivered to you via email.
Note: If you purchased the boxed version of SONAR, your redemption code is printed on
a card in the box. Your SONAR serial number will be added to your Cakewalk store
account automatically after redeeming the code on www.cakewalk.com.
Note: If you choose not to install the Sample files or additional content, you may not have
all the necessary content to use the tutorials included in this guide.
8 Installation, registration and basic setup
Installation
To i n s tall S O NAR
1. Start your computer.
2. Close any programs that are open or running.
3. Do one of the following:
If you are installing from Cakewalk Command Center (recommended): Follow the
instructions under
Center provides the easiest way to download and install SONAR. Simply log in with your
Cakewalk account and Cakewalk Command Center automatically retrieves your serial
number and simplifies the installation process.
“Cakewalk Command Center” on page 10. Cakewalk Command
If you are installing from a digital download: Locate the file
SONAR_[Artist/Professional/Platinum]_Build[BuildNumber].exe that
was saved to your computer's hard drive and double-click it to begin the installation.
4. Click the Install button.
Note: If you exit Setup without completing the installation, repeat step 3 to restart the
installation process.
5. Follow the installation instructions on the screen.
Note: When SONAR has finished installing, additional SONAR components will also be
installed.
Installation, registration and basic setup9
Installation
Cakewalk Command Center
1. Download Cakewalk Command Center from www.cakewalk.com/Command-Center, then
install it on your computer.
2. Double-click the Cakewalk Command Center shortcut on your desktop to start Cakewalk
Command Center.
3. Type your Cakewalk account username and password, then click Connect. If you do not yet
have an account, click Create Account.
10 Installation, registration and basic setup
Installation
4. Your purchased products are listed under Connected Products. Select SONAR, then click
Install. Cakewalk Command Center will download and install SONAR.
During the download process, you may be presented with helpful information about the
product that is being downloaded. A download progress bar is displayed at the bottom of the
page.
5. When installation is complete, click Launch to open SONAR.
Installation, registration and basic setup11
Installation
Uninstalling SONAR
1. Double-click the Cakewalk Command Center shortcut on your desktop to start Cakewalk
Command Center.
2. Your purchased products are listed under Connected Products. Select SONAR, then click
Uninstall.
12 Installation, registration and basic setup
Installation
Running SONAR for the first time
There are several ways to start SONAR:
Double-click the SONAR icon on your desktop.
From Cakewalk Command Center, select SONAR [Artist, Professional or Platinum] and
click Launch.
Windows 8: Click the SONAR tile on the Start screen.
Windows 7: Click the Start button, and choose Programs > Cakewalk > SONAR [Artist,
Professional or Platinum] > SONAR [Artist, Professional or Platinum].
Configuring your audio device
The first time you start SONAR, it automatically attempts to detect and configure any ASIO
audio devices on your computer. If no ASIO devices are found, it next attempts to detect any
MME audio devices, then automatically runs the Wave Profiler utility to determine the proper
MIDI and Audio settings for your audio device.
When the Wave Profiler determines the kind of card you have, always accept the default
settings. You can run the Wave Profiler again if you install a new audio device or driver by
choosing Edit > Preferences > Audio - Driver Settings in SONAR and clicking the Wave
Profiler button (or ASIO Panel button if you are using an ASIO audio device).
Setting up MIDI devices in SONAR
After the Wave Profiler utility has finished running, SONAR will then automatically scan your
computer for any MIDI input and output devices that are installed. Sometimes you may need to
tell SONAR which devices you want to use, or you may want to change the MIDI outputs and
devices you are using. Choose Edit > Preferences > MIDI - Devices in SONAR to configure
your MIDI devices.
Installation, registration and basic setup13
Running SONAR for the first time
Figure 1. The MIDI - Devices section.
At the top of the window, you will see the MIDI Inputs. Make sure that all devices in this window
are checked. If a device is not checked, click on the square next to it.
At the bottom of the same window, you will see the MIDI outputs. The device at the top of the list
is Output 1, and the one below Output 2, and so on. Select one device at a time in the Outputs
window. Clicking Move Selected Devices to Top will allow you to change the order of your
MIDI devices. Then check all devices that appear in the window to select them for output.
Enabling MIDI output devices will allow you to play your MIDI tracks through an external
keyboard, sound module or your sound card's on-board MIDI device. For more information on
setting up MIDI devices using the MIDI Devices dialog box, see the online Help topic “Setting
Up the MIDI In and MIDI Out Devices”.
14 Installation, registration and basic setup
Running SONAR for the first time
Basic audio setup
In order to hear sound when playing back a project in SONAR, it is essential to configure your
audio device properly.
1. Do one of the following to open SONAR:
Double-click the SONAR shortcut on your desktop.
From Cakewalk Command Center, select SONAR and click Launch.
Windows 8: Click the SONAR tile on the Start screen.
Windows 7: Select Start > All Programs > Cakewalk > SONAR [Artist, Professional
or Platinum] > SONAR [Artist, Professional or Platinum].
2. When SONAR opens (and especially if this is the first time you open it), you will be
presented with several different dialogs boxes. For now, we will close any dialog boxes that
may appear.
3. Go to Edit > Preferences > Audio - Devices to select your audio input and output device.
Figure 2. The Audio - Devices section.
Installation, registration and basic setup15
Basic audio setup
4. Select the desired Input Driver. Depending on your computer's configuration, you may have
multiple options available.
Your Input Driver is typically your computer's sound card or audio interface’s input. You will
want to set this to the device that you plug your microphone, guitar, keyboard or other input
device into.
5. Select the desired Output Driver.
Your Output Driver is typically your computer's sound card or audio interface’s output. You
will want to set this to whatever your headphones or speakers are connected to.
If you are not sure about which option is best, use the following table as a guide.
I am usingSuggested configuration
A laptop with an included sound
card.
Set both your Input Driver and Output Driver to
<name of your sound card> (MME 32-bit).
Note: If your sound card has multiple outputs, set your
Playback Device to the one labeled “Speakers” or
“Headphones”.
A USB microphone.Set your Output Driver to
An audio interface that I bought from
a music store.
A high-end sound card that I
purchased from a computer store
(Sound Blaster, etc.).
<name of your sound card> (WDM / KS). Set your Input
Driver to your USB microphone.
You may also get good performance by using WASAPI.
Be sure that you have installed drivers for your new audio
device either from the included disc or the manufacturer's web
site. Set both the Input Driver and Output Driver devices to
<name of your sound card> ASIO.
Some sound cards may offer different driver options. Start by
setting both the Output Driver and Input Driver devices to
<name of your sound card> (WDM / KS).
6. Go to Edit > Preferences > Audio - Driver Settings to select the playback and recording
timing master devices.
7. In the Playback Timing Master list, select the audio output device that you want SONAR to
treat as the default or main output device. This should be the output that your headphones or
speakers are connected to.
16 Installation, registration and basic setup
Basic audio setup
8. In the Record Timing Master list, select the input on your sound card that you plan to plug
devices into, such as a microphone, guitar, keyboard or other input device.
Figure 3. The Audio - Driver Settings section.
For more information and the recommended settings for specific models of sound cards, visit