Front & Back Panels Materials & Colors
Small Mobile Demo / Sampling Cart
-L1 LAMINATE
-L3 LAMINATE
-L4 LAMINATE
-LST STAINLESS
Laminate colors shown are approximate.
Flame Soapstone Red Laminate:
CBC-SDCX-L1
-L5 LAMINATE
Mission Smoke Gray Laminate:
CBC-SDCX-L3
-L6 LAMINATE
Navy Legacy Laminate:
CBC-SDCX-L4
-L7 LAMINATE
(Oven, hot plate, pan & utensils not included)
Stainless Steel:
CBC-SDCX-LST
Versailles Cherry
Woodgrain Laminate:
CBC-SDCX-L5
Black Laminate:
CBC-SDCX-L6
Eggplant Laminate
(Allergen-free color code):
CBC-SDCX-L7
Keeps prepared food hot & ready to serve
Use & Care Manual
Models:
CBC-SDCX-L1, CBC-SDCX-L3, CBC-SDCX-L4,
CBC-SDCX-L5, CBC-SDCX-L6, CBC-SDCX-L7, CBC-SDCX-LST
(CBC-SDCX-L6)
Includes:
l
Stainless steel cart with handles & wheels (2 wheels w/brakes; 2 without)
l
Stainless OR WilsonArt® Laminate panels on cart front & sides
l
Built-in Double Buffet Server l 22 Maple Cutting Board
l
Space for optional Appliances
300 Watts / 2.5 amps / 120 Volts / 60 Hz
(Frying pan & utensils not included)
Cadco, Ltd.
200 International Way, Winsted, CT 06098
l
860-738-2500
E-mail: info@cadco-ltd.com
4/8/2016 RV00
8
Fax 860-738-9772
l
Website: www.cadco-ltd.com
Congratulations on your purchase of a
Cadco Mobile Demo/ Sampling Cart!
We recommend that you record the following information for warranty
purposes: Model #_____________
Purchase Date:_____________Dealer:__________________________
IMPORTANT SAFEGUARDS
To reduce the risk of personal injury or property damage when using
electrical appliances, basic safety precautions should always be followed,
including the following:
1. READ ALL INSTRUCTIONS BEFORE USE.
Do not touch hot surfaces! Always Use Handles. Always use hot pads or pot holders
2.
until unit cools.
3.
To protect against electrical shock, do not immerse tray base, cord or plug in
water or other liquid.
4. Close supervision is necessary when any appliance is used by or near
children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool
completely before putting on or taking off parts, and before cleaning or storing
the appliance.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions or has been damaged in any manner. Call the Cadco
Factory Service Department at 860-738-2500 for the nearest authorized
service center.
warranty applies in 48 contiguous US states only.)
7. The use of accessory attachments not recommended by the appliance
manufacturer may cause injuries.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner.
11. It is recommended that this appliance not be moved when it contains hot oil
or other hot liquid.
o not clean with metal scouring pads. They can scratch and ruin the finish
12. D
of your unit.
13. Always attach plug to appliance first, then plug cord into the wall outlet. To
disconnect, turn any control to Off, then remove plug from wall outlet.
14. Do not use appliance for other than intended use.
DO NOT USE PLASTIC DISHES OR PLASTIC WRAP ON WARMING SURFACE.
15.
(**See page 7 for Warranty info. (Cart/ buffet server
WARRANTY
Cadco warrants that this Cart/Buffet Server be free from defects in material
and workmanship for a period of one year from date of purchase. (Laminate
panels have 30 day initial defect warranty only.) (Warranty provides repair of
unit.)
A copy of your original purchase receipt is required for proof of purchase
date. This warranty does not cover consequential damage of any kind or
damages resulting from accident, misuse, abuse, or external service or repair
attempts by unauthorized personnel. Inquiries concerning this warranty and the
use and maintenance of this unit should be directed to Cadco, Ltd.
This Cart / Buffet Server is on-site service item; call us at 860-738-2500
for the location of your nearest authorized service center.
Warranty is applicable only in the 48 contiguous US states.
OPTIONAL ACCESSORIES
Model SS-36: Safety Shield for Small Demo Carts
l To prevent diners from touching hot top of cart surface
l Stainless steel
l May be attached by end-user; for carts built after 1/1/2016
Model PS-CBC-6CP - Cold Bay Pan Holder Kit
l Stainless pan holder with 2 half size, 6 deep Cambro
®
ColdFestTM pans with Cambro® lids.
l Converts cart hot bay to cold bay.
l May be attached/ detached by end user.
OPTIONAL - ADD CADCO PORTABLE APPLIANCES
These Cadco appliances will fit on the CBC-SDCX-L Series Carts.
See Cadco catalog or website for product details:
HOT PLATE
PHR-1C (Glass-Ceramic)
BIR-1C (Induction)
KR-S2 (Cast Iron)
CSR-3T (Tubular)
PANINI / CLAMSHELL GRILL
CPG-10 (Panini)
CPG-10F (Clamshell)
CPG-10FC (Clamshell; clear)
CONVECTION OVEN
OV-003 (1/4 Size)
2
7
CARE AND CLEANING
Before initial use and after each subsequent use, wash removable parts* in
warm sudsy water, rinse and dry. The clear lids are top-rack dishwasher
safe.The most effective and safe way to clean the buffet server cart top is with
a mild detergent and a soft moist cloth. Do not use any scouring agents! DO
NOT SUBMERGE THE BUFFET SERVER CART TOP OR LET THE HEAT
CONTROL COME IN CONTACT WITH WATER.
* Wash side & front laminate panels with a damp cloth when necessary. DO
NOT USE STEEL WOOL OR ABRASIVE KITCHEN CLEANERS. Do not use
bleach. Do not allow cleaning liquids to drip into the bottom panel retainer
channels.
If there is any food residue remaining on the metal cart surface, it should be
removed after each use. To do so, scrub gently with a fine cleansing pad such
as nylon mesh or other ordinary cleansing pad. DO NOT USE STEEL WOOL
OR ABRASIVE KITCHEN CLEANERS. To polish, use a non-abrasive glass
cleaner. Any food residue remaining can be whisked away with a gentle stroke
of a nylon mesh pad. Rinse and wipe dry. Do not allow water to spill or seep
into frame. NOTE: It is normal for the heating surface to eventually discolor due
to heat. Any maintenance required for this product other than normal care
and cleaning, should be performed by our Factory or an Authorized
Service Center.
DISASSEMBLY FOR SERVICING BUFFET SERVER TOP
These models were designed to allow easy removal of the carts buffet server
top to facilitate servicing the electrical components, if required. (Model CBC-
HHH-L shown in Fig. E; procedure is the same for CBC-SDCX-L Series
models.)
SAVE THESE INSTRUCTIONS
NOTE: A 72(6) power supply cord (or cord set) has been provided to reduce
the hazards resulting from becoming entangled in or tripping over a longer cord.
Longer cord sets or extension cords may be used if care is properly exercised in
their use. If a long cord set or extension cord is used, the marked electrical rating
of the cord set or extension cord should be at least as great as the electrical rating
of the appliance. The longer cord should be arranged so that it will not drape over
the counter top or table top where it can be pulled on by children or tripped over
accidentally.
The high-tech warming surface will remain unblemished for a long time with
appropriate care. T
attractive alternative for keeping appetizers and other foods
he high-grade, long-life stainless steam pans allow for an
warm. For best
results use nylon, plastic, wooden or rubber utensils.
Tool required: 5/32 Allen key (also known as Allen wrench,
Allen hex wrench, L-hex key, Hex key, etc.) (not included)
1. Remove buffet server pans/lids and pan holders (see pg. 4 & Fig. B)
2. Remove the screws at the top corners (8 screws total; 2 per corner)
of the cart. (Fig. D)
3. Lift the top of the cart off the base, (Fig. E) and turn top over to access the
electrical components. (Be sure to have a Cadco authorized service center
handle the repair work, to avoid voiding the warranty.)
4. After repairs are completed, reverse above directions to re-assemble.
Fig. D
Allen key
Fig. E
Buffet server cart top
6
3
HOW TO USE
Before using for the first time, become familiar with the Cart features, Fig.
A. Wash removable parts in warm sudsy water, rinse and dry. Clean the buffet
server & cart with a mild detergent and a soft moist cloth. Do not use any scouring
agents! DO NOT SUBMERGE THE BUFFET SERVER CART TOP OR LET THE
PLUG COME IN CONTACT WITH WATER. Rinse and wipe dry. Do not allow
water to spill or seep into the frame. See Care & Cleaning Instructions for details.
Clear Rolltop Lid
2 Half Size Steam Pans
Pan Holder
Cart Handle
Cutting Board
(removable)
2 Drawers
6 Coiled Cord & Plug
Casters/Wheels
(2 with Brakes;
2 with directional locks)
Storage shelves
Space for optional
appliance
Buffet Server
Controls Area
(see Fig. C)
Bumper
guards
on all corners
Space for optional
quarter size oven
Cord holes for
optional oven
cord to exit cart
Fig. A
Assemble Cart
1. Place pan holder (Fig. B1) over the carts top warming surface, with 2 keyhole
slots and 2 open slots on the inside flaps of the pan holder positioned over the
4 locking knobs on the warming surface (Figs. B2 - B3).
Press pan holder down onto warming surface, and slide pan holder until knobs
engage (Fig. B4). Tighten knobs to keep pan holder in place. (Reverse steps
to remove pan holder for cleaning.)
2. Place steam pans into pan holder, and cover pans with the clear rolltop lid.
3. (When actually using cart to keep foods warm) place steam pans with hot food
into the pan holder, and put the lid in place.
4. Place any optional appliances (such as hot plate) on top cart surface.
5. Place optional oven inside cart as shown, if applicable.*
*Cord for optional oven exits the cart through cord holes in the cart storage
shelves.
6. See page 7 for suggested list of optional Cadco appliances that will fit on this
cart, and optional accessories.
Initial Use (Buffet Server) (Fig. C):
1. Plug the cart into a 120 volt outlet.
2. Turn unit on by pressing the ON/OFF rocker switch at the back of the cart to
the ON position.
3. Turn the variable thermostat knob counterclockwise to maximum setting.
4. Heat the warming base without foods on it for approximately 10 minutes in
order to seal the special coating. (Only top level of the cart in buffet server
area heats up.) Temporary smoking is normal during initial use.
Pan Holder
Keyhole slots
Open slots
1
Cart Warming Surface
Locking Knobs
Pan Holder
Locking Knobs
3
(Cutting Board)
Cart Warming Surface
Pan Holder
Locking Knobs on
Cart Warming Surface
1. The buffet server heating element is equipped with a variable thermostat knob,
located in back of cart. (Fig. C) Buffet server heat range is from 155
F, to keep foods at serving temperatures. (Buffet server is designed for keeping
food warm, not for warming up cold food.) For best results, use maximum heat
Subsequent Use:
0
to 200
0
setting to quickly reach your desired temperature, then adjust to desired
2
Cart Warming Surface
Locking Knobs
Pan Holder
Locking Knobs
4
Fig. B
ON/OFF
HI
ON
ON
LOW
WARM
OFF
Rocker Switch
Variable
Thermostat
Fig. C
temperature.
2. The light will come on
only during heat cycle. Due to the low wattage necessary
for buffet servers, it can be 20-30 minutes before the light cycles off.
3. Attach the pan holder to the top of the cart warming base before placing the
pans in place.
4. The unit comes with two half size stainless steam pans and a clear polycarbonate
rolltop lid. The half size/ 4.3 quart pans each hold up to 40 four ounce servings.
5. Stainless steam pans may be used in an oven, but NOT the lids!!!
6. Food placed in steam pans should be fully cooked and already hot. Buffet
server is designed for keep-warm function only. To retain heat and moisture
in foods, keep lids on when not serving.
7. Foods containing little or no liquid should be kept warm on Low setting, and
stirred periodically.
Knob
Light
4
5
Loading...