CAD u37
Thank you for purchasing the CAD Audio u37 USB microphone.
CADusb products bring high quality audio to your social media, gaming or home studio projects Creative control and limitless innovation await your beckon call as the result of CAD’s more than 80 years of professional audio expertise.
Explore our CADusb series of products to unlock your creative edge and experience expression thru innovation.
Applications:
Studio Vocals, Speech, Instruments, Podcasts,
Desktop Recording
Please read the manual carefully before using and keep it for further reference.
Features:
•Large condenser microphone element for warm, rich recordings
•Cardioid pick-up pattern minimizes background noise and isolates the main sound source
•Smooth, extended frequency response is excellent for singing, speech and instruments
•-10dB overload-protection switch minimizes distortion from loud sound sources
•Bass-reduction switch reduces room noise
•Side-address design used by broadcast, TV and recording studios
•Ten-foot USB cable for flexible mic placement
•Desktop mic stand included
Specs: u37
Operating Principle |
Condenser Studio Capsule |
Frequency Response |
20Hz – 20kHz |
Polar Pattern |
Super Cardioid |
Sensitivity |
-40dBV @ 1Pa |
Encoding |
16 bit resolution, 48K sampling rate |
PAD |
-10dB |
Roll Off |
Reduce Proximity Effect |
Windows and Macintosh compatible
Assembly:
1.Hold the tripod stand upside down and fold out the legs of the stand until they snap in place.
2.Attach the swivel mount to the tripod and then attach the microphone to the swivel mount with the mounting nut.
Swivel mount
Mounting nut
Tripod Stand
Operation:
1Pad switch 0, -10 dB
a.0 = normal sensitivity
b.switch to -10 to decrease sensitivity for loud signals.
2 Status LED
a.LED illuminates blue to indicate power “ON”
b. Flashes to indicate in recording mode
3 a. Low cut filter switch: = flat response
2
1
3
4
b. = reduces low frequency response, use
this to reduce pick up of low frequency noises by the microphone
4USB port
The CAD u37 is compatible with most software. Simply choose a software product that suits your application and enjoy the benefits that the CAD u37 provides.
Installation:
1.Connect the u37 to your device with the supplied USB cable, connection is complete when the blue LED is lit.
2.Adjust your operating system and software settings for proper recording and playback:
Select C-Media as the recording device.
Select your default sound playback device.
(Note, mic is plug and play, no additional drivers are need)
Polar Pattern & Frequency Response
Accessories:
Tripod Stand |
Swivel mount |
USB cable: |
|
Ø3.8x1.2M USB 2.0 |
|||
|
|
||
|
|
USB A Type to |
|
|
|
Mini B type plug |
CAD Audio
6573 Cochran Rd
Solon, Ohio 44139
CADAudio.com
For Returns or Service visit CadAudio.com and click the Support tab.
Part # 47811-14-00 04-24-15 C.W.H.