Cad audio U1 User Manual

CAD u1
Assembly:
1. Unfold the legs of the tripod stand.
Operation:
Thank you for purchasing the CAD Audio u1 USB microphone.
Applications:
Studio Vocals, Speech, Instruments, Podcasts, Desktop Recording
Please read the manual carefully before using and keep it for further reference.
Features:
• Dynamic microphone element designed for vocals and instruments
• Cardioid pick-up pattern isolates the main sound source and minimizes background noise
• Smooth, extended frequency response is excellent for singing, speech and instruments
• Built in pop filter minimizes "P-popping"
• On-Off switch for instant mute
• Ten-foot USB cable for flexible mic placement
• Desktop mic stand included
Specs: u1
Operating Principle Dynamic Capsule Frequency Response 80Hz – 16kHz Polar Pattern Cardioid Sensitivity -53dBV @ 1Pa Encoding 16 bit resolution, 48K sampling rate
Windows and Macintosh compatible
2. Attach the microphone clip to the tripod and then attach the microphone to the mic clip.
On/Off switch
Microphone clip
Tripod Stand
Installation:
1. Connect the u1 to your device with the attached USB cable.
Slide the on/off switch to the on position. (switch up)
2. Adjust your operating system and software settings for proper recording and playback:
Select the u1 as the recording device. Select your default sound playback device. (Note, mic is plug and play, no additional
drivers are needed)
Polar Pattern & Frequency Response
1
On/Off switch Slide switch up, a red light will indicate that the microphone is connected and will flash while recording.
2
USB connector Refer to the installation page for instructions on setup.
The CAD u1 is compatible with most software. Simply choose a software product that suits your application and enjoy the benefits that the CAD u1 provides.
Accessories:
Tripod Stand
For Returns or Service visit cadaudio.com and click the Support tab.
2
Microphone clip
CAD Audio 6573 Cochran Rd Solon, Ohio 44139 CADAudio.com
Part # 47811-11-01 11-06-15 C.W.H.
1
Loading...