CAD Audio
6573 Cochran Rd., Bldg.I Solon, OH 44139 U.S.A.
Tel: (440) 349-4900 Fax: (440) 248-4904
Sales: 800-762-9266 www.cadaudio.com
©2012 CAD Audio Part No. 62070- 03-0 0 Sept2012
StagePassTM WX1200
Wireless Microphone System
Manual and
Quick Start-up Guide
Individuals with cardiac pacemakers and other similar medical devices
should consult with their physician before using any RF devices.
Though the output level of this wireless system is below 50 milliwatts,
the proximity of the transmitter to the implant device could pose a
threat.
As with any wireless product, environmental conditions can reduce or
in some cases prohibit a successful connection between the transmitter
and the receiver.
This device complies with Part 15 of the FCC Rules. Most users of
CAD Audio wireless products in the United States do not need a license
for operation. However, the rules for unlicensed operation state that
this device must not operate in excess of 50 milliwatts and it must not
cause harmful interference to other wireless devices, and must accept
interference received from other devices. Wireless products meeting
CAD factory standards adhere to these rules. The FCC reserves the right
to change these rules at any time. For more information contact the
FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless
microphone website at:
www.fcc.gov/cgb/wirelessmicrophones
2
StagePassTM WX1200
Introduction
Thank you for purchasing the CAD Audio StagePassTM WX1200 system.
We hope that you enjoy the easy and exciting performance that the
StagePassTM delivers for your next gig. CAD Audio/Astatic Commercial
has been creating high-value products since 1938 and prides itself on
supporting and developing the live performer. Our design criterion for
the WX1200 was straightforward: develop a high-performance wireless
microphone system agile enough to cope with today’s dynamic RF
environment that is both easy to use and exciting to operate.
The StagePassTM WX1200 includes the
following features:
• VHF Channelization for increased operating range
• Diversity Operation to minimize multipath
interference
• 16 Channel Agility for frequency plan exibility
• Scan-LinkTM technology for instantaneous and
automatic channel conguration
- First, the receiver conducts an environmental
frequency evaluation then selects a channel.
- Second, the receiver links to the transmitter
and sets the transmit frequency automatically.
• AA batteries for more than 10hrs of
continuous operation
• Transmitters have soft touch On & Mute switches
with multi-color LED indicators.
• Metal Chassis for a durable and formidable
shielded enclosure
• 1/4" and XLR-type outputs for interfacing exibility
7
Channelization
The CAD WX1200 series wireless has 16 selectable VHF channels.
Channel indicators 0 through F are displayed on the receiver.
Corresponding frequencies (in MHz) are listed below.
0 175.125 8 178.125
1 175.375 9 178.925
2 175.775 A 180.725
3 175.975 B 181.525
4 176.175 C 182.025
5 176.525 D 183.225
6 176.925 E 184.525
7 177.925 F 185.125
7 of the channels can be used at any one time if optimal atmospheric
conditions exist.
CH 0 , CH 2, CH 4, CH 9, CH B, CH D and CH F are recommended for
simultaneous usage.
3
6
Operating Instructions
• Insert new high-quality alkaline AA batteries into your transmitter,
observing proper direction.
• Power up the receiver and transmitter.
• Scan-LinkTM your system by pressing the Set/Scan button on the
receiver to automatically select operating channel.
• While the receiver display is ashing hold the transmitter
IR node in alignment with the receiver IR node within a distance
of approximately 12". The receiver will automatically set the
transmitter channel. When the display stops ashing the system
is “Scan-Link’d.”
• To set up additional units continue the sequence while keeping
previously linked transmitters away from the receiver that is
attempting to Scan-LinkTM.
Receiver RX1200 (Front)
• Set/Scan button – Scan-LinkTM operation
• IR Node – Scan-LinkTM communication
• Antenna A and antenna B
• AF Peak indicator LED
• Channel display
• Diversity indicator LED
• Select button – manual selection of receiver channel
Bodypack TX1210 Transmitter
• IR Node for Scan-LinkTM operation
• 4 pin connector (TB4M-type)
• 3 Color LED indicator
- Green = Transmitter is powered up
and audio is live
- Orange = Transmitter is powered up
and audio is muted
- Flashing Red = Low battery status
(change battery ASAP)
• Power Switch – Soft touch switch
- Holding the switch for 2 seconds turns
the transmitter on/off
- Quick momentary press of the switch
mutes or unmutes the audio
• Volume control
Specications TX1210
Frequency Response ................................................................40Hz – 15KHz
Maximum Input Level
Microphone Input: ................................................................. -18dBV
Instrument Input: .....................................................................-6dBV
RF Output ...........................................................................................<50mW
Dimensions .............................................. 2-9/16" [6.5cm] x 4-1/4" [10.8cm]
x 15/16" [2.3cm]
Net Weight .................................................................................... 2.8oz [82g]
Power Requirements ............................................................ 2x AA batteries
Battery Life .................................... >=10hrs, high-quality alkaline batteries
Interfacing to TX1210 input connector
3k3
3k3
3k3
3-wire type electret mic
Dynamic mic
2-wire type electret mic
Instrument
4 5
Receiver RX1200 (Rear)
• 1/4" unbalanced output
• Volume control
• Squelch adjustment
(factory preset – do not adjust without factory support )
• XLR-type balanced output
• DC power jack (use included power supply)
Specications WX1200
Maximum Output Level
Balanced Output .............................................................................. -16dBV
Unbalanced Output ......................................................................... -13dBV
Output Impedance
Balanced Output .......................................................................... 350ohms
Unbalanced Output ..................................................................... 250ohms
Switchable Channels .................................................................................. 16
Dimensions .............................................. 9-1/2" [23.0cm] x 4 -1/2" [11.4cm]
x 1-9 /16" [4.0cm]
Weight ........................................................................................12.3oz [350g]
Power requirements .................................................... 12-15VDC, =<500mA
Handheld TX1200 Transmitter
• Power Switch – Soft touch switch
- Holding the switch for 2 seconds turns the transmitter
on or off
- Quick momentary press of the switch mutes or unmutes
the audio
• Tri-color LED indicator
- Green = transmitter is powered up and audio is live
- Orange = transmitter is powered up and audio is muted
- Flashing Red = low battery status (change battery ASAP)
• IR node for Scan-LinkTM operation
Specications TX1200
Microphone Operating Principal ............................... Moving coil dynamic
Polar Pattern ..................................................................................... Cardioid
Frequency Response ............................................................... 40Hz – 15KHz
Maximum SPL ...................................................................................... 143dB
Dynamic Range ..................................................................................... 110dB
RF Output ...........................................................................................<50mW
Dimensions ................................................ 9 -1/2" [24.1cm] x 1-7/8" [4.8cm]
Net Weight ................................................................................... 7.3oz [208g]
Power requirements ............................................................. 2x AA batteries
Battery Life .................................... >=10hrs, high-quality alkaline batteries
5
Soft-touch power
switch
Tri-color LED
indicator
IR node for
Scan-Link
TM
operation
Loading...