GXL2200
m)
7
Professional Microphones
Description
The GXL2200 is a large diameter, fixed cardioid pattern, condenser
microphone. High sensitivity and low distortion make this microphone
an ideal candidate for recording, broadcast, sound reinforcement
including vocal and instrument applications. The capsule in the
GXL2200 features a 1" gold vapor deposited diaphragm.
Power
The GXL2200 requires standard 48 Volt phantom power
Swivel Mount
The GXL2200 comes with a swivel mount that will fit any standard
5/8" x 27 threaded microphone stand. The swivel mount can be removed
by unscrewing the knurled ring on the bottom of the microphone.
CAD Quality
The GXL2200 microphones are audio tested and inspected under the
direction of CAD Professional Microphones, offering an exceptional
level of value.
Specifications
Generating Element:
Externally Biased True Condenser
Polar Pattern:
Unidirectional (Cardioid)
Frequency Response:
30 Hz - 20 kHz
Sensitivity:
-53dB 0dB=1V/uBar @ 1 kHz
Impedance:
Less than 200 ohms
Equivalent Noise Level:
Less than 20dB (A-weighted)
Finish:
Matte Black
Power:
48 Volts Phantom Power
Connector:
3 pin XLR type
Phasing:
Positive diaphragm pressure produces a positive
voltage on pin 2 with respect to pin 3.
Dimensions:
2.17" x 7.72" (55mm x 196mm), Mic only
Weight:
14.1 oz. (400 grams), Mic only
Optional Accessory:
Shock Mount
CAD Professional Microphones hereby warrants that this product will be free of defects in material and workmanship for a period of one year
from the date of purchase. In the unlikely event a defect occurs CAD will, at its option, either repair or replace with a new unit of equal or greater
value. You should retain proof of purchase to validate the purchase date and return it with any warranty claim. Return warranty claims carefully
packed, insured and prepaid to the Service Department.
This warranty excludes exterior finish or appearance, damage from abuse, misuse of the product, use contrary to CAD’s instructions or unauthorized
repair. All implied warranties or merchantability or fitness for a particular purpose are hereby disclaimed and CAD hereby disclaims liability
for incidental, special or consequential damages resulting from the use or unavailability of this product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Some states do not allow the
exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusions and
limitations may not apply to you.
Note: No other warranty, written or oral is authorized by Omnitronics, LLC
ONE-YEAR LIMITED WARRANTY
Large Diameter Condenser Microphone
2.165
(55mm)
2.362
(60mm)
7.71
(196m
GXL2200
GOLD DIAPHRAGM CONDENSER MICROPHONE
1.654
(42mm)
46873-32-00 / Rev. 1 / 5-25-04
Loading...