CAD Audio E100S User Manual

Supercardioid Condenser Microphone

Equitek E100S Supercardioid Condenser

Engineered and built in the USA, the new E100S
large diaphragm supercardioid condenser has the
lowest noise oor in its class (3.7 dBA) and the
smooth, vintage tone and robust low end CAD
is known for. The bootstrapped, full differential
Quadra-FET™ front end delivers high sensitivity
and low distortion, plus CAD’s proprietary circuitry
ensures the highest performance.

The nickel plated 1 inch capsule delivers accurate
phasing on instruments, and a full rich vocal tone,
accentuated by the extended low frequency
response. Features include an 80Hz hi-pass lter
and a 10dB pad.

From vocals to percussion, acoustic instruments
and everything in between, the CAD Equitek E100S
will prove to be one of the most versatile tools in
your microphone locker, in the studio or on stage.
Vintage wood grain cherry case and stealth shock
mount included. 48V Phantom power is required.

EQUITEK E100S

CAD Professional Microphones

6573 Cochran Rd., Building I
Solon, Ohio 44139 U.S.A.
Tel: [phone] Fax: [phone]
Sales: [phone]
www.cadmics.com

©CAD Professional Microphones

Part No. 46873-93- 00 July 2009

EQUITEK E100S

Supercardioid Condenser Microphone

Specications

†

Operating Principle ......................................... Condenser

Polar Pattern ...............................................Supercardioid

Frequency Response ................................<40Hz - 18KHz

Sensitivity ......................................-30dBV (28mV) @ 1Pa

Impedance ........................................................150 ohms

Max SPL .........................................150dB (Pad engaged)

Self Noise ...................................... 3.7dBA (best in class)

Hi-Pass ..................................................................... 80Hz

Attenuator ................................................................ 10dB

Power Requirements ................................................. P48

Net Weight ..................................................... 22oz (610g)

†

Specications subject to change without notice.

Dimensional Drawing

(not shown actual size)

Frequency Response

Polar Pattern

CAD Professional Microphones

6573 Cochran Rd., Building I
Solon, Ohio 44139 U.S.A.
Tel: [phone] Fax: [phone]
Sales: [phone]
www.cadmics.com

Two-Year Limited Warranty

CAD Professional Microphones hereby warrants that this product will be free of defects
in material and workmanship for a period of two years from the date of purchase. In the
unlikely event that a defect occurs CAD will, at its option, either repair or replace with a
new unit of equal or greater value. Retain proof of purchase to validate the purchase date
and return it with any warranty claim.

Return warranty claims carefully packed, insured and prepaid to the Service Department
at the address listed below.

This warranty excludes exterior nish or appearance, damage from abuse, misuse of the
product, use contrary to CAD’s instructions or unauthorized repair. All implied warranties,
merchantability, or tness for a particular purpose is hereby disclaimed and CAD hereby
disclaims liability for incidental, special or consequential damages resulting from the use
or unavailability of this product.

This warranty gives you specic legal rights and you may have other rights that vary
from state to state. Some states do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty lasts, so the above
exclusions and limitations may not apply to you.

Note: No other warranty, written or oral is authorized by CAD Professional Microphones.

Shipping Instructions

Please call our customer service department at 440 -349-490 0 for a pre-approved return
authorization number.

Carefully repack the unit and return it to: CAD Professional Microphones,
6573 Cochran Road, Building I, Solon, Ohio 44139.

RETURNS WITHOUT A PRE-APPROVED RETURN AUTHORIZATION NUMBER
WILL BE REFUSED.

If outside the United States, contact your local dealer or distributor for warranty details.

©CAD Professional Microphones

Part No. 46873-93- 00 July 2009