Cabletron Systems 9G421-02, 9G429-02 User Manual

SmartSwitch 9000

9G421-02/9G429-02

Local Management Appendix

9032332-01

Appendix

9G421-02/9G429-02 Module Specific
Information

Introduction

This appendix contains local management information that is specific to the
9G421-02 and 9G429-02 Ethernet Modules.

The 9G421-02 and 9G429-02 modules are 3-port Ethernet switching modules with:

• 2 front-panel gigabit Ethernet ports

• 1 Internal Network Bus (INB) backplane port

Modifying Fields and User Privileges

To modify fields on this module, you must have read-write or super-user
privileges. If you have read-only privileges, you can view information; however,
you cannot modify any fields. For more information about user privileges and
community names, see the SmartSwitch 9000 Module Local Management User’s

Guide.

1

9G421-02/9G429-02 Module Specific Information

Module Interface Codes

The 9G421-02 and 9G429-02 modules have 7 interfaces each. Table 1 lists the
identifying number, name, and description of each interface.

Table 1. 9G421-02/9G429-02 Module Interface Codes

Interface

Number

1 SMB1 1 Mbps System Management Bus

2 SMB10 10 Mbps System Management Bus

3 HOST i960 Host

4 LOCAL i960 Controller

5 INB Internal Network Bus

6 ENET1 Gigabit Ethernet Front Panel Port 1

7 ENET2 Gigabit Ethernet Front Panel Port 2

Interface

Name

Interface

Description

Use the numbers listed in Table 1 to configure the module’s default interface (see
the Figure 1, the General Configuration Screen).

2