Cabela's 24-0301, 24-0401 User Manual

44 lb (20 kg) /110 lb (50 kg)

Stainless Steel

FLAT TOP SCALE

44 lb. MODEL #24-0301

110 lb. MODEL #24-0401

Wing Nuts

Plastic

Face Plate

Dial

Stainless Steel

Platform

Tare Dial

Pointer

ASSEMBLY

INSTRUCTIONS

Before using the Flat Top Scale for the rst time, attach the Platform onto the top of the Scale.

1. Begin by removing the cardboard support from the top of the Scale.

2. Attach the Platform to the top of the Scale with the included Wing Nuts.

3. DO NOT over-tighten the Wing

Nuts to prevent damaging the

threads.

ZERO THE SCALE

After attaching the Platform to the top of the Scale, the Pointer may not indicate “0” weight. Set the Pointer to the “0” position for the Scale to

accurately indicate an object’s weight.

To zero the Scale, rotate the Tare Dial either clockwise or counter-clockwise (depending on the direction in which

the Pointer is off) until the Pointer indicates “0” weight.

44 lb. Model Shown

TO CLEAN THE SCALE

Thoroughly wipe clean with a soft damp cloth and mild detergent. Wipe with clear water and dry immediately. DO NOT IMMERSE THE SCALE IN WATER OR LIQUIDS.

REV122710

Before beginning the assembly, check the package contents for all of the parts.

If you are missing any parts, or if any parts are damaged, contact

Cabela’s Customer Service- Retail Store Purchases 1-800-905-2731 (U.S. & Canada) /

Catalog & Internet Purchases: 1-800-237-8888 / All International: 1-308-234-5555

The Platform is to be empty while zeroing the Scale.

To ensure accurate weight, make sure the Pointer is set to “0” before weighing

an object.

To weigh objects in a container, place an empty container on the Platform then rotate the Tare Dial to zero the Scale. The Scale will now only indicate the

weight of objects added to the container.