Installation Guide
DB-525
R NT
NNECT
Front Panel 5.25 inch Device Bay
Step 1
Front Connect DB-525
metal frame with P.C.B
Step 2
Check the contents of the Box.
Remove the cover case from the computer.
Screws
DB-525
plastic cover 1
for HDD
Installation guide
DB-525
plastic cover 2
for MO/FDD/Zip
Please check that everything
connected to the computer has
been removed and that the
computer itself has been
switched off from the main
power supply.
Please consult the computer manual
when remove the cover case from the
computer.
Caution:Please be careful when
removing the cover case as all edges
are sharp.
Step 4
Connect the FireWire cable.
(For IEEE-1394 host adapter with 6pin connector.)
Locate the FireWire 6pin-plug cable in the package.
Internal IEEE 1394 Port
Step 5
For built-in internal USB 2.0 or 1.1 connector on mainboard:
refer to Step 5-1.
For USB 2.0 host adapter with A-t yp e c on ne ct or :
refer to Step 5-2.
Step 5-1
(For built-in internal USB 2.0 or 1.1 connector on mainboard.)
Locate A-t o- 5p in ty pe US B c ab le in th e p ac ka ge .
USB Power
USB P3-
USB P3+
GND
Connect the USB interface cable.
Connect the USB 2.0 or 1.1 interface cable.
ASUS
16
USB Power
USB P2-
USB P2+
GND
NC
10 5
Step 3
Install DB-525 to the computer.
1.Remove the 5.25-inch panel.
Further details on how to
remove the panel can be found
in your computer
2.Insert your DB-525 into the slot,
Do not force it in any further than
needed.
3.Please use the screws
provided to lock the DB-525
into place.
Caution:For easy installation,
connect the USB & FireWire
cables to DB-525 before insert
it into the slot.
To connect the USB cable from the main board, please check your
mainboard manual and page 2 of this manual for further
connection instruction.
Caution:The USB port may be damaged if inserting USB flat
cable on reverse.(Warranty does not cover such damage)
Step 5-2
(For USB 2.0 host adapter with A- ty pe co nn ec to r)
Connect the USB 2.0 interface cable.
Internal USB Port
Internal USB Port