C2G 86790 Product Data Sheet

DATA SHEET

High Speed HDMI® Cable with Built-In Power Inserter 4K60

Provide low loss power insertion for active HDMI devices, while supporting 4K60 audio video signals

OVERVIEW

The High Speed HDMI Cable with Built-In Power Inserter 4K60 is the ideal solution for supporting HDMI bus-powered devices such as
extenders, active cables, AOC cables or signal-sensing switches. This cable eliminates the need for separate voltage inserters or adapters,
which increases reliability.

The power supplies associated with source devices such as computers, teleconferencing codecs, media players and set-top boxes are
designed, according to HDMI standards, to deliver a 55mA hot plug supply. When an accessory demands more current than the source can
supply, the system may fail to operate dependably. Insufficient power may manifest as a flashing image (HDCP problem), distorted video
(EDID related issues), or even a complete loss of the image (hot plug assertion failure). The HDMI Cable with Built-In Power Inserter allows
for the necessary and proper voltages for the hardware “handshake”, HDCP key authentication and exchange, EDID information exchange
and hot plug connection detect.

The attached power inserter isolates the power from the source device and provides dedicated power to support HDMI switching, splitting,
and extension accessories. If an installation leverages active cables with embedded chipsets, embedded electronic-to-optical media
conversion, signal-sensing, auto-switching or similar devices, then this power inserter will be a critical performance element.

Note: For proper use of this cable, the USB Micro-B female connector must be attached to a power source. The cable is directional with
a Source/Transmitter (TX) side and a Display/Receiver (RX) side. The cable and HDMI connectors are marked with TX and RX for added
convenience.

FEATURES

- Supports up to a 4K resolution at 60Hz

- Low loss power insertion

- Attached Micro USB female power inserter

- Micro USB male to USB-A male cable

ITEM DESCRIPTION

86790 1.8m High Speed HDMI Cable with Built-In Power Inserter 4K60
86791 3m High Speed HDMI Cable with Built-In Power Inserter 4K60
86792 4.5m High Speed HDMI Cable with Built-In Power Inserter 4K60

DATA SHEET

SPECIFICATIONS:

High Speed HDMI® Cable with Built-In Power Inserter 4K60

ELECTRICAL SPECIFICATIONS:

- Type: UL20276 30AWG/5P/4C; 80°C, 30V; Color: Black; UL-E342987

- Voltage Rating: 30V

- Signal Bandwidth: 600MHz

- Nominal Velocity of Propagation: 18Gbps

- Insulation Resistance: 100M(OHMS*KM Min at 20°C)

- Dielectric Strength: AC-500V/Min

PHYSICAL SPECIFICATIONS:

- Operating Temperature: 0°C to +50°C; 15-85% RH
(Non-Condensing)

- Storage Temperature: -25°C to +85°C; 15-85% RH
(Non-Condensing)

- Shield Type/Braid Coverage: 50%

- Shield Type/Braid: 16/4/0.12(AL)

- Jacket Material & Thickness: PVC & 0.51mm

- Drain Wire AWG & Construction: 30AWG & 7/010TC

- Minimum Bend Radius: 120

- 100% Test for Short/Open: 10 Mohm Insulation Resistance (300V DC)

- Product is CE marked and conforms to 2011/65/EU RoHS2

HDMI Connector

- Gender: Male x 2

- Insulation: Black

- Pin: Gold Plated

- Plug Shell: Nickel Plated

Micro USB Connector

- Gender: Female Micro B

- UL2725 28AWG*2C

- OD: 3.0mm

- Colour: Black 45P PVC

- Shell: Nickel Plated

USB Power Cable

- Gender: USB-A Male to USB Micro-B Male

- Contact Resistance: 2 ohm(max)

- Insulation Resistance: 10 Mohm(min)

- Hi-Pot Test: DC 300V/10ms

Great King Street North
Birmingham, West Midlands B19 2LF
UK Phone [phone]
EMEA Phone [phone]
www.c2g.com/uk

© 2018 Legrand All Rights Reserved rev.03/18 Data Sheet – 14365