C2G 84307 Product Data Sheet
4K Mini DisplayPort to HDMI Active Adapter Converter
Connect a device with a Mini DisplayPort output to any display with a HDMI input
Overview
This adapter allows the Mini DisplayPort™ video output of a laptop to connect to the HDMI® input of a display
and is perfect for applications including displaying video on an HDTV, projector, or monitor in a classroom, on a
desktop, or in a meeting room. This Mini DisplayPort to HDMI active adapter can be used in either DisplayPort
single-mode or dual-mode outputs , providing the conversion for a Mini DisplayPort source even when that source
does not support DP++. Active Mini DisplayPort conversion is excellent for applications where multiple Mini DisplayPort adapters are required to connect to a single graphics card. This allows every active adapter to interface
with a corresponding display.
Be prepared for any meeting, presentation, or event with the full confidence that you have the right connection in
an ultra-compact design. The Mini DisplayPort to HDMI adapter can connect a Mini DisplayPort equipped laptop
or tablet to a projector, monitor, or HDTV with a HDMI input port. The compact design of this adapter converter
makes it a perfect fit for BYOD (Bring Your Own Device) applications in education or corporate environments.
This simple plug and play adapter converter does not require drivers for install and the device is powered through
Mini DisplayPort bus power, so no additional power adapters are needed.
The dongle-style adapter converter reduces strain on the video port. The cable between the Mini DisplayPort connection and the adapter converter provides strain relief that protects the port from strain damage as cords are
moved.
Features
Active Conversion of Mini DisplayPort to HDMI
Support resolutions up to: 4096x2160 at 24Hz or 3840x2160 at 30Hz
Dongle style adapter reduces strain on ports
SPECIFICATIONS:
4K Mini DisplayPort to HDMI Active Adapter Converter
Electrical Characteristics:
Voltage Rating: 30V
Conductor Resistance: at 20ºC max 30AWG 376.96Ω/km
Insulation Resistance: 10M-KM Min at 20ºC DC 500V(EIA-364-21)
Dielectric Strength: AC 500V/1 minute no breakdown(EIA-364-20)
Impedance: Pairs (differential mode) 100±50Ω
Attenuation (Max): 5.02dB at 100~450MHz; 7.695dB at 1GHz; 12.595dB at 2GHz;
17.495dB at 3GHz; 22.395dB at 4GHZ; 27.295dB at 5GHz; 32.195dB at
6GHz; 37.095dB at 7GHz
Return Loss (Min): 15.00 at 100~675MHz; 12.90 at 7GHz; 9.20 at 2GHz; 7.04 at
3GHz; 5.5 at 4GHz; 4.31 at 5GHz; 3.33 at 6GHz; 2.51 at 7GHz
NEXT (MAX): -36dB at 0.1~1.35GHZ; -23.44dB at 2GHz; -20.80dB at 3 GHz; -
18.93dB at 4GHz; -17.48dB at 5GHz; -16.29dB at 6GHz; -15.28dB
at7GHz
FEXT: -26dB / Cable at 100~7000MHz (Max)
Physical Characteristics:
Jacket: PVC
Outer Diameter: 5.2mm ±0.2mm
Conductor 1: 5 Pairs at 32AWG (7/0.08 TC)
Insulation 1: FM-PE+Skin ID 0.63mm ± 0.05mm (Pairs: 1. White/Brown 2. White/ Red
3. White/Orange 4. White/Green 5. White/Blue)
Pair Drain: 32AWG (7/0.8TC) Insulation FM-PE+Skin ID 0.63mm ± 0.05mm
Conductor 2: 5 Individual 32AWG (7/0.08 TC)
Insulation 2: HD-PE+Skin ID 0.5mm ± 0.05mm (Conductors: 1. RED 2. Orange 3.
Yellow 4. White 5. Green
Shield 1: AL Mylar Coverage 100%
Shield 2: Braid, 16/7/0.12 AL-Mg
Shield 3: Mylar Coverage 100%
Pair: 2 Singles Lair flat and Parallel
Core: 8 Pairs
Drain Wire: 7/0.08TC
Operating Temperature: 0ºC to 50ºC
Storage Temperature: -25ºC to 70ºC
Loading...