B&W CCM Cinema 7 User Manual

Custom Installation

CCM Cinema 7

See nothing, hear everything

This speaker is designed for down-ring, in-ceiling left, center and right speaker positions in a discreet home cinema system. Both drivers are angled to the mounting surface and can be directed towards listeners so they hear the correct balance of sound. That way, dialogue is crystal clear and special effects come across accurately.

Thanks to Bowers & Wilkins unique QuickDogs™ xing method, installation is simple, requiring no tools. And, in common with other recent CI products, it features an ultra-narrow bezel and magnetically attached metal grille, both of which can be customised to complement décor.

If preferred, the supplied round grille can be replaced with an optional, square CCM683 grille.

Technical Specications

Description 2-way in-ceiling system

Drive Units 1x Ø25mm (1 in) Nautilus™

swirl loaded aluminium dome tweeter

1x Ø180mm (7 in) blue Kevlar® cone bass/midrange

Frequency range (-6dB) 25Hz – 50kHz

Frequency rsponse (+/-3dB) 32Hz - 22kHz

Recommended 25W – 150W

Amplier Power

Sensitivity 87dB (2.83V, 1m)

Nominal Impedance 8Ω (4.5Ω minimum)

Frame Ø290mm (11.4 in)

Cut-out Ø254mm (10 in)

www.bowers-wilkins.com

Nautilus and QuickDogs are trademarks of B&W Group Ltd. Kevlar is a trademark of DuPont

Depth behind surface 128mm (5 in)

Protrusion 8.5mm (0.33 in)

Pre-mount Kit PMK C8

Back Box BB 6C

This information is intended as a guide only and reects the current specication at the time of print. We reserve the right to make changes to the specications.